• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.629-632
• /
• 1986

Both combinatorial and parametric optimization are used in computer-aided design(CAD). The most commonly occuring parametric optimization problems in engineering design such as design of control systems, design of electric circuits are usually expressed either as differentiable or as nondifferentiable semi-infinite programming(SIP) problems. In this paper we express algorithms for a class of computer-aided design problems arising in control systems.

• 시스템엔지니어링학술지
• /
• 제2권1호
• /
• pp.5-10
• /
• 2006

This paper describes an operational concept of ships with CEC system. An operational architecture is derived using systems engineering approach. From consideration of operational environments and stakeholders, the operational concept scenarios are established and its requirements are derived. The operational requirements based operational architecture is presented using a computer aided systems engineering tool.

• 한국군사과학기술학회지
• /
• 제8권4호
• /
• pp.41-49
• /
• 2005

This work describes the ventilative NBC CPS(Nuclear Biological and Chemical Collective Protection Systems). The operational requirements of NBC CPS is derived using systems engineering approach. The NBC CPS system operational architecture which describes the operational concept of NBC CPS is proposed using a computer aided systems engineering tool.

• 시스템엔지니어링학술지
• /
• 제6권2호
• /
• pp.59-64
• /
• 2010

국내에 다양한 시스템 엔지니어링 전산지원도구(Computer Aided tools for Systems Engineering)가 도입되고 도구의 기능이 향상됨에 따라 시스템 엔지니어링 전산지원환경을 구축하는 사례가 늘어나고 있다. 전산지원환경을 구축하기 위해서는 기존의 국내외 시스템 엔지니어링 표준 및 지침에서 언급되지 않은 구체적인 업무에 대한 고려가 요구되기 때문에, 많은 노력과 시간이 소요된다. 시스템 엔지니어링 본 연구에서는 국내 연구소 및 기업의 시스템 엔지니어링 전산지원환경을 구축하는 과정에서 습득된 문제점과 경험적 교훈(lessons learned)을 정리하였다.

• The Journal of Advanced Prosthodontics
• /
• 제7권2호
• /
• pp.122-128
• /
• 2015

PURPOSE. To assess the marginal and internal gaps of the copings fabricated by computer-aided milling and direct metal laser sintering (DMLS) systems in comparison to casting method. MATERIALS AND METHODS. Ten metal copings were fabricated by casting, computer-aided milling, and DMLS. Seven mesiodistal and labiolingual positions were then measured, and each of these were divided into the categories; marginal gap (MG), cervical gap (CG), axial wall at internal gap (AG), and incisal edge at internal gap (IG). Evaluation was performed by a silicone replica technique. A digital microscope was used for measurement of silicone layer. Statistical analyses included one-way and repeated measure ANOVA to test the difference between the fabrication methods and categories of measured points (${\alpha}$=.05), respectively. RESULTS. The mean gap differed significantly with fabrication methods (P<.001). Casting produced the narrowest gap in each of the four measured positions, whereas CG, AG, and IG proved narrower in computer-aided milling than in DMLS. Thus, with the exception of MG, all positions exhibited a significant difference between computer-aided milling and DMLS (P<.05). CONCLUSION. Although the gap was found to vary with fabrication methods, the marginal and internal gaps of the copings fabricated by computer-aided milling and DMLS fell within the range of clinical acceptance (< $120{\mu}m$). However, the statistically significant difference to conventional casting indicates that the gaps in computer-aided milling and DMLS fabricated restorations still need to be further reduced.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.435-435
• /
• 2000

Light Rail Transit (LRT) system is a complex and large system in which there are many subsystems, interfaces, functions and demanding performance requirements. Because many contractors participate in the development, it is necessary to apply methods of sharing common objectives and communicating effectively among all of the stakeholders. This paper shows not only the methodology and the results of computer-aided systems engineering including requirement management, functional analysis and architecting LRT system, but also propose a tool to help manage a project by linking WBS (Work Breakdown Structure), work organization and PBS (Product Breakdown Structure). The application of computer-aided tool RDD-100 provides the capability to model product design knowledge and decisions about important issues such as architecting the top-level system. The product design knowledge will be essential in integrating the following life-cycle phase activities over the life of the LRT system. Additionally, when a new generation train system is required, the reuse of the database can increase the system design productivity and effectiveness significantly.

• Journal of Power Electronics
• /
• 제3권2호
• /
• pp.69-80
• /
• 2003

Computer aided engineering (CAE) is a systematic approach to develop a better product/application with maximum possible options and minimum transition time. This paper presents a comprehensive feasibility analysis of various CAE techniques for evaluation and optimization of power electronic converters and systems. Different CAE methods for analysis, design, and performance improvement are classified. In addition, their advantages compared to the conventional workbench experimental methods are explained in detail and through examples.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.443-447
• /
• 1986

오늘날 제조업에 있어서는 시장의 다양화, 원가절감 및 리드타임의 단축이라는 대내외적 요구에 부응할 수 있는 기술 생산체재의 확립이 요구되고 있다. 이에 따라 설계 및 기술변경(Engineering Change)에따른 원가상승을 막기 위해 CAE(Computer aided engineering), CAD(Computer aided design)의 도입을 서두르게 되었고 CAD데이타의 효율적 이용에 의한 가공 및 생산적 측면에서 CAM(Computer aided manufacturing)의 도입도 검토하게 되었다. 본 논문은 이러한 개념의 발상동기와 이를 뒷받침하기 위한 한국 아이 비 엠이서 제공하는 하드웨어 및 소프트웨어를 소개하고 공장자동화를 위한 기술 생산 통합시스템의 구축이라는 측면에서 아이 비 엠이 추구하는 방향을 검토하고 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.425-430
• /
• 1986

This paper introduces the program to develop graphics-oriented, interactive, computer-aided design modules for machine elements which are developing in Mechanical Engineering Department of The Ohio State University in U.S.A. The CAD modules are developed to be efficiently performed within the arena of minicomputer- and personal computer-based computer-aided design. In addition, this paepr deals with the state-of-the-art in computer-aided design.

• 한국철도학회논문집
• /
• 제4권4호
• /
• pp.147-154
• /
• 2001

A high-speed rail system represents a typical example of large-scale multi-disciplinary systems, consisting of subsystems such as train, electrical hardware, electronics, control, information, communication, civil technology etc. The Systems Engineering, as a methodology for engineering and management of today's ever-growing complex system, must be applied to development of such systems. This paper presents systems engineering framework model to have to be applied to the systems engineering technology development task for the korean next-generation high-speed railway systems in progress and demonstrates data models and schema for computer-aided systems engineering software, RDD-100, for use in its development and management.