• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.435-438
• /
• 1998

In this paper, Electret is formed to range voltage -5[kV] to -8[kV] by corona charging in PTFE film and sensor is manufactured by method of moments in sensing infra sonic. Charges of charged film are calculated also TSC measurement and induced potential of sensing electrode according to the charges is become aware of computer simulation. Electret Infra Sonic Transducer, which is designed and manufactured according to the potential and electric field simulation in using method of moments, is proved as it is effectively. Because sensitivity that measured under 10[Hz] is that average value of sensitivity rising rate is 6.34 [dB/oct] as average value is $\pm$1 [dB/oct] range -5[kV] to -8[kV] in corona charging film. As a result, it is believed that characteristic of acquired transducer can be application of medical treatment, industry, and animal life researches and the study of noise elimination, what's more, is required.

• Journal of Mechanical Science and Technology
• /
• 제20권10호
• /
• pp.1722-1729
• /
• 2006

Predicting the mechanical properties of the 3-D scaffold using finite element method (FEM) simulation is important to the practical application of tissue engineering. However, the porous structure of the scaffold complicates computer simulations, and calculating scaffold models at the pore level is time-consuming. In some cases, the demands of the procedure are too high for a computer to run the standard code. To address this problem, the representative volume element (RVE) theory was introduced, but studies on RVE modeling applied to the 3-D scaffold model have not been focused. In this paper, we propose an improved FEM-based RVE modeling strategy to better predict the mechanical properties of the scaffold prior to fabrication. To improve the precision of RVE modeling, we evaluated various RVE models of newly designed 3-D scaffolds using FEM simulation. The scaffolds were then constructed using microstereolithography technology, and their mechanical properties were measured for comparison.

• Journal of Biosystems Engineering
• /
• 제20권3호
• /
• pp.275-287
• /
• 1995

The rice processing complex(RPC) consisted of the rice handling, drying, storage, and milling processes. It has been established at 83 locations domestically by April 1994, and 200 of RPC will be built more throughout the country. Therefore, this study has been performed to achieve two objectives as the followings : 1) Development of mathematical models which can assess the requirement of electricity, fuel, and labor for four model systems of rice processing complex. 2) Development of a computer simulation model which produce the improved designs of RPC by the evaluation results of energy requirements of four RPC models. The results from this study are summarized as follows : 1) Mathematical models were developed on the basis of result of mass balance analysis and required power of machines for each process. 2) A computer simulation model was developed, which can produce the improved designs of RPC by the evaluation results of energy requirements. The computer simulation model language was BORLAND $C^{++}$. 3) The results of simulation showed that total energy requirements were ranged from 75.94㎾h/t to 124.30㎾h/t. 4) From the results of computer analysis of energy requirement classified by drying type, it was found that energy requirement of the drying type A{paddy rice (PR) for storage-natural air drying(15%), PR for milling-heated air drying(16%)} were less than that of the drying type B{1 step-natural air drying(PR for storage : 18%, PR for milling : 20%), 2 step-heated air drying(PR for storage : 15%, PR for milling : 16%)}. 5) The energy efficient drying method is that all the incoming rough rice to RPC should be dried by national air drying systems. If it is more than the capacity of national air drying system, the amount of surplus rough rice is recommended to be dried by the heated air drying method.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.170-175
• /
• 2007

The finite volume method for forging simulation is examined to reveal its possibility as well as its problem in this paper. For this study, the finite volume method based MSC/SuperForge and the finite element method based AFDEX are employed. The simulated results of the homogeneous compression obtained by the two softwares are compared to indicate the problems of the finite volume method while several application examples are given to show the possibility of the finite volume method for simulation of upsetter forging processes. It is shown that the finite volume method can not predict the exact solution of the homogeneous compression especially in terms of forming load and deformed shape but that it is helpful to simulate very complex forging processes which can hardly be simulated by the conventional finite element method.

• Journal of information and communication convergence engineering
• /
• 제12권1호
• /
• pp.14-18
• /
• 2014

A recent major development in computer technology is the advent of wearable computer systems. Wearable computer systems employ a wireless universal serial bus (WUSB), which refers to a combination of USB with the WiMedia wireless technical specifications. In this study, we focus on an integrated system of WUSB over wireless body area networks (WBANs) for wireless wearable computer systems. However, current WBAN MACs do not have well-defined quality of service (QoS) mapping and resource allocation mechanisms to support multimedia streams with the requested QoS parameters. To solve this problem, we propose a novel QoS-aware time slot allocation method. The proposed method provides fair and adaptive QoS provisioning to isochronous streams according to current traffic loads and their requested QoS parameters by executing a QoS satisfaction algorithm at the WUSB/WBAN host. The simulation results show that the proposed method improves the efficiency of time slot utilization while maximizing QoS provisioning.

• International Journal of Computer Science & Network Security
• /
• 제21권8호
• /
• pp.212-218
• /
• 2021

The Proportional Integral Derivative (PID) controller is the most popular industrial controller and more than 90% process industries use this controller. During the past 50 years, numerous good tuning methods have been proposed for Single Input Single Output Systems. However, design of PI/PID controllers for multivariable processes is a challenge for the researchers. A comparative study of three PID controllers design methods has been carried-out. These methods include the DS (Direct Synthesis) method, IMC (Internal model Control) method and ETF (Effective Transfer Function) method. MIMO PID controllers are designed for a number of 2×2, 3×3 and 4×4 process models with multiple delays. The performance of the three methods has been evaluated through simulation studies in Matlab/Simulink environment. After extensive simulation studies, it is found that the Effective Transfer Function (ETF) Method produces better output responses among two methods. In this work, only decentralized methods of PID controllers have been studied and investigated.

• International Journal of Computer Science & Network Security
• /
• 제21권9호
• /
• pp.11-18
• /
• 2021

The Proportional Integral Derivative (PID) controller is the most popular industrial controller and more than 90% process industries use this controller. During the past 50 years, numerous good tuning methods have been proposed for Single Input Single Output Systems. However, design of PI/PID controllers for multivariable processes is a challenge for the researchers. A comparative study of three PID controllers design methods has been carried-out. These methods include the DS (Direct Synthesis) method, IMC (Internal model Control) method and ETF (Effective Transfer Function) method. MIMO PID controllers are designed for a number of 2×2, 3×3 and 4×4 process models with multiple delays. The performance of the three methods has been evaluated through simulation studies in Matlab/Simulink environment. After extensive simulation studies, it is found that the Effective Transfer Function (ETF) Method produces better output responses among two methods. In this work, only decentralized methods of PID controllers have been studied and investigated.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권8호
• /
• pp.4072-4089
• /
• 2018

This paper introduces a scheme for optimizing the material properties of mass-spring systems of different resolutions to provide coherent behavior for reduced level-of-detail in MSS(Mass-Spring System) meshes. The global optimal material coefficients are derived to match the behavior of provided reference mesh. The proposed method also gives us insight into levels of reduction that we can achieve in the systematic behavioral coherency among the different resolution of MSS meshes. We obtain visually acceptable coherent behaviors for cloth models based on our proposed error metric and identify that this method can significantly reduce the resolution levels of simulated objects. In addition, we have confirmed coherent behaviors with different resolutions through various experimental validation tests. We analyzed spring force estimations through triangular Barycentric coordinates based from the reference MSS that uses a Gaussian kernel based distribution. Experimental results show that the displacement difference ratio of the node positions is less than 10% even if the number of nodes of $MSS^{sim}$ decreases by more than 50% compared with $MSS^{ref}$. Therefore, we believe that it can be applied to various fields that are requiring the real-time simulation technology such as VR, AR, surgical simulation, mobile game, and numerous other application domains.

• 인터넷정보학회논문지
• /
• 제19권6호
• /
• pp.53-62
• /
• 2018

최근 컴퓨터 하드웨어의 성능이 증가함에 따라, 휴대용 전자 기기 뿐만 아니라 개인 컴퓨터에서도 더 사실적인 컴퓨터 그래픽 물체들을 생성하고 보여줄 수 있게 되었다. 이러한 이유로, 컴퓨터 그래픽을 포함한 디지털 콘텐츠는 더 계산적 비용이 높은 사실적인 가상의 물체들을 다양한 기기에서 실시간으로 표현하는 것을 요구한다. 멀티-플랫폼에서 구동되며 컴퓨터 그래픽을 포함한 게임, 애니메이션 등의 콘텐츠의 제작을 돕기 위해서는 유니티와 언리얼 엔진과 같은 기술들이 주로 사용된다. 시뮬레이션에서 더 사실적인 가상의 물체의 움직임을 표현하기 위해서는, 가상의 물체는 다른 물체들과 충돌해야 하며 현실세계와 비슷한 반응을 보여야 한다. 하지만, 다이나믹 시뮬레이션은 많은 계산 비용을 요구하나, 대부분의 휴대용 기기들을 이러한 다이나믹 시뮬레이션을 실시간으로 제공하지 못한다. 본 논문에서는 GPGPU 계산을 이용하여 구형 물체와 실시간으로 충돌 및 반응을 수행하는 천 시뮬레이션을 제안한다. 제안된 방법이 사실적인 디지털 콘텐츠에 유용할 것으로 기대된다.

• The Journal of the Acoustical Society of Korea
• /
• 제21권2E호
• /
• pp.56-62
• /
• 2002

This paper describes a new method of stability evaluation for an estimated impulse response of a plant. It is difficult for the conventional stability evaluation equation to be used in an adaptive feedforward control system which uses an immeasurable acoustic transfer system of a real plant, because the equation requires an exact true impulse response of the plant. Therefore, the usefulness of the conventional equation is limited in a computer simulation. The proposed method is applicable to not only a computer simulation but also a real feedforward adaptive control system. It is found that the system is stable when the value of misadjustment is below -10 dB through computer simulations and experiments. And also, it is proved that the error signal is stable through the verification using filtered reference and filtered error LMS methods.