• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.343-346
• /
• 2001

The effect of agitation speed and aeration rate on mTG production and cell growth by Streptoverticillum morbarense was investigated. Dissolved oxygen was controlled by on-line computer-controlled fermentation system. The agitation speed and aeration rate of 2.5 L fermentor ranged from 330 to 360 게m and 1 vvm to 4 vvm, respectively. The highest mTG production was 2.1 U/mL when dissolved oxygen level was 20%, and it was improved almost 1.1 times in comparison with that without dissolved uxygen control.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.459-462
• /
• 1986

The liquid level in a spherical tank was controlled with a micro-computer and the dynamic behavior of this non-linear system due to the variation of set point was studied. The adaptive control theory was used and the real values of controlled variables were compared with the theoretical values from a mathematical model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.10A
• /
• pp.788-795
• /
• 2003

We analyze the performance of a truncated power controlled CDMA(code division multiple access) cellular systems with base station antenna arrays. Erlang capacity and the channel capacity which is a maximum date rate to maintain almost error free communication are analytically derived. The numerical results show there can be a substantial increase in Erlang capacity and in channel capacity by antenna arrays incorporating with the truncated power control scheme.

• Journal of Biomedical Engineering Research
• /
• v.11 no.2
• /
• pp.257-268
• /
• 1990

A system has been developed for monitoring the effect of neuromuscular blocking frugs and the neuromuscular function during anesthesia and surgery. This system is composed of software and hardware, the latter are nerve stimulator, force transducer, interface board(preamplifier, filter, peripheral input/output) and personal computer (apple ll) , the former are programmed in ASSEMBLY and BASIC language. The nerve stimulator which is controlled by personal computer is capable of delivering single shocks at o.)Hz, train of four at 2Hz and tetanic stimulation at 30, 100, 200Hz. The response, adduction of the thumb, is sensed by the force transducer. The output of the force transducer Is amplified, filtered, converted digital signal and then processed by the per- sonal computer. The personal computer quantia4es twitch and traln of four tesponse and calculates the 74 ratio (Ta/Tl )between the first and fourth response of train of four. This ratio is used to estimate the level of the neuromuscular block. This system has reaserch potential for determining the effect of newer neuromuscular blocking drugs for comparlsion with presently used drugs of alternatively, for delerminig the effects of blocking drugs in altered physilogical states.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06a
• /
• pp.764-769
• /
• 1994

The impedance of an electro-acoustic transducer can be controlled by motional feedback, and the noise in a duct can be reduced actively by adjusting the impedance using an additional sound. In this paper, two approaches for active noise control using motional feedback (MFB) loudspeaker are described. First configuration uses an external sensor to pickup of source directly. In this configuration, the adaptation of controller is necessary to compensate the change of transfer function from noise source to control poing. The second configuration uses a new adaptive algorithm specialized for peridic noise. Because this configuration does not require any reference input and the error sensor couples very tightly with control loudspeaker, this MFB system itself is independent of the duct condition. No microphone are required in both configurations, so that a more reliable and stable active control system can be realized under severe conditions such as high pressure, high temperature, dust, flow and so on.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.2
• /
• pp.172-177
• /
• 2006

In the networked control system (NCS), the uncertain network-induced delay and nonlinear controlled object are the main problems, because they can degrade the performance of the control system and even destabilize it. In this paper, a class of uncertain and nonlinear networked control systems is discussed and its sufficient condition for the robust asymptotic stability is presented. Further, the maximum network-induced delay that insures the system stability is obtained. The Lyapunov and LMI theorems are employed to investigate the problem. The result of an illustrative example shows that the robust stability analysis is sufficient.

• Proceedings of the KIEE Conference
• /
• 2003.10b
• /
• pp.181-183
• /
• 2003

In this paper, phase controlled series resonant converter(PCSRC) system for control power supply in base station is suggested. PCSRC system is robust to load variations because it is POSR(parallel output series resonant) type. And it provides stable output voltage by changing phase angle of MOSFET switches to input voltage variations. Firstly, operation analysis about suggested series resonant converter system was carried. Then Computer simulations using PSIM were carried to prove characteristics of suggested system.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.3
• /
• pp.90-96
• /
• 1998

The self-excited oscillation is the phenomenon which can be observed in the systems composed of nonlinear elements. The phenomenon is of fundamental importance in nonlinear systems and, as far as the design of a nonlinear system is concerned, it should be considered along with the stability analysis. In this paper, the oscillation of a system controlled by a static nonlinear fuzzy controller is theoretically addressed. First, the describing functionof a static fuzzy controller is derived and then, based on the derived describing function, self-excited oscillation of the system controlled by a static fuzzy controller is predicted. To obtain the describing function of the static fuzzy controller, a simple struture is assumed for the fuzzy controller. Finally, computer simulation is included to show an example where the describing function given in the paper is used to predict the self-excited oscillation of a fuzzy-control system.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.18 no.6
• /
• pp.367-373
• /
• 2018

Background: Fear of local anesthesia (LA) is a significant impediment to dental care as many patients delay or avoid treatment to avert pain. Computer-controlled local anesthetic delivery system (CCLAD), with constant and controlled rate of flow, present a painless alternative. The present study aimed to compare anxiety and pain perceived with conventional and computerized systems, for different stages of anesthesia delivery when administering various nerve blocks. Methods: One hundred patients requiring bilateral LA participated in the study. One side was anesthetized using one system and the contralateral side was anesthetized using the other, in two separate appointments. Patients assigned anxiety scores on a 5-point scale and used the visual analogue scale (VAS) for pain determination at needle insertion, during delivery of anesthetic solution, immediately after injection, and at the end of the periodontal procedure. Each patient's preference for the delivery system of future injections was also recorded. Results: Patients reported significantly lower anxiety levels with CCLAD compared to the syringe. Significantly lower mean VAS scores for anesthesia deposition, pain immediately after, and at the end of the periodontal procedure were also noted. However, pain at needle insertion was comparable between the two systems, with no statistical significance. Overall, 64.4% patients preferred CCLAD for future anesthesia. Conclusion: Lower pain perceived with CCLAD and higher preference for the system suggest that CCLAD should replace conventional syringes to allow pain-free dental treatment.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.2
• /
• pp.45-51
• /
• 2018

In this paper, we propose a Designed and Developed home router management system. Through the fourth industrial revolution and development of IoT technology, now people can experience a wide range of IoT related services at their workplace or daily lives. At the industrial site, IoT devices are used to improve productivity such as factory automation, and at home, IoT technology is used to control home appliances from a remote distance. Usually IoT device is integrated and controlled by the router. Home router connects different IoT devices together at home, however when security issues arise, it can invade personal privacy. Even though these threats exist, the perception for home router security is still insufficient. In this paper, we have designed and developed home router management system using DEVS methodology to promote the safe use of home router. Through the DEVS methodology, we have designed the system and developed the mobile application. This management system enables users to set up security options for home router easily.