• Journal of Electrical Engineering and Technology
• /
• v.9 no.1
• /
• pp.71-79
• /
• 2014

This paper discusses a method for the determination of frequency control reserve requirement with consideration of the interaction between ex-ante planning and real-time balancing. In proposed method, we consider the fact that the delivered energy for tertiary control reserve is determined based on required capacity for secondary control reserve and the expected amount of load errors. Uncertain load errors are derived by Brownian motion, an optimization method is suggested using a stochastic programming. In a short, we propose an interactive dependent method for determining secondary control reserve requirement based on the principle that it satisfies to minimize the total cost. As a result, this paper provides will analyze for an example model to demonstrate the capabilities of the method.

• Journal of Biosystems Engineering
• /
• v.17 no.1
• /
• pp.18-26
• /
• 1992

A mechanical-hydraulic hitch control system has been adapted to most agricultural tractors. But it has various defects due to friction, inertia and hysteresis. Recently a number of electronic-hydraulic hitch control systems have been developed in several countries to improve control performance of the agricultural tractors equipped with a mechanical-hydraulic hitch control system. This study was conducted to develop a new electronic-hydraulic hitch control system using an electro-hydraulic servo valve instead of an on-off valve and to carry out computer simulation of the system. According to the result of computer simulation, the control system showed the best performance when the proportional constants were 9 and 4 for position and draft control respectively. The step and frequency responses were improved as flow rate increased.

• 전기의세계
• /
• v.31 no.5
• /
• pp.375-382
• /
• 1982

The optimum control of voltage and reactive power in large system requires large amounts of complicated calculation. If the large power system is controlled by the centralized control scheme, the necessary computing time, memory requirments and data transmission channels increase exponetially, and computer control of the system becomes difficult. Piecewise method which aims at the reduction of the difficulties of centralized control scheme is to decompose a large power system into several subsystems, each of which is controlled by a local computer and the control efforts of each subsystem are coordinated by a central computer. Unless sufficient coordination is made between subsystems, the control quality may become very poor. This paper describes how piecewise method can be applied in the optimal control of voltage and reactive power in large system, and presents effective calaulating algorithm for the solution of the problem. The numerical example for model system is presented here.

• Proceedings of the KIPE Conference
• /
• 2010.11a
• /
• pp.276-277
• /
• 2010

This paper describes the control of a utility-connected doublefed induction machine (DFIM) for wind power generation systems (WPGS). Real and reactive powers (PQ) at the stator side of DFIM are strictly controlled to supply the power to the grid without any problems. In this paper the control is realized using Fuzzy PI controller based on the stator-flux orientation control.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.496-496
• /
• 2000

We propose a neuron computer for tracking motion of particles in multi-dimensional space. The neuron computer is constructed of neural networks and their connections, which is a simplified model of the brain. The neuron computer is assemblage of neural networks, it includes a control unit, and the actions of the unit are represented by instructions. We designed a neuron computer to recognize and predict motion of particles. The recognition unit is constructed of neuron-array, encoder, and control part. The neuron-array is a model of the retina, and particles crease an image on the array, where the image is binary. The encoder picks one particle from the array, and translates the particle's location to Cartesian coordinates, which is scaled in [0, 1] intervals. Next, the encoder picks another particle, and does same process. The ordering and reduction of complex processes are executed by instructions. The instructions are held in the control part. The prediction unit is constructed of a multi-layer neural network and a feedback loop, where real time learning is executed. The particles' future locations are forecasted by coordinate values. The neuron computer can chase maximum 100 particles that take evasions.

• Journal of Korea Game Society
• /
• v.1 no.1
• /
• pp.17-23
• /
• 2001

In this paper, we refer to positive effect and negative effect of game. And we inquire the recent trend of edutainment that emphasizes charm of game and educational effect at the same time. Because the simulation game and the role-playing game have strong toxication, the limitation of computer use is essential. Therefore, we present dynamic computer using-time control system for prevention of game toxicaton and for activity of educational contents. The method considered in this paper increases computer using-time n proportion to using of educational contents. So it lead user of computer to use educational contents voluntarily.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.5
• /
• pp.346-352
• /
• 2016

This paper proposes an adaptive robust control method for an acrobot system in the presence of input disturbance. The acrobot system is a typical example of the underactuated system with complex nonlinearity and strong dynamic coupling. Also, disturbance can cause limit cycle phenomenon which appears in the acrobot system around the desired unstable equilibrium point. To minimize the effect of the disturbance, we apply a fuzzy disturbance estimation method for the swing-up and balancing control of the acrobot system. In this paper, both disturbance observer and controller for the acrobot system are designed and verified through mathematical proof and simulations.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.403-405
• /
• 2007

This paper presents the over-modulation strategy and indirect vector control drive of NPC type PWM inverter. NPC inverter has three level phase voltage output.It can perform in high voltage through assembling switching components. It has less harmonics and surge voltage stress at motor terminals than the 2 level inverter in same switching frequency through 3 level voltage. The conventional railway vehicle has used the vector control to MI=0.907 and the slip-frequency control from MI=0.907 to six-step mode. The slip-frequency control has bad motive power and slow torque control response. But vector control has good motive power and can instant torque control. In this paper, output voltage is controlled linearly from linear region to six-step mode by using over-modulation strategy. And NPC inverter is used.

• Korean Journal of Agricultural Science
• /
• v.37 no.1
• /
• pp.123-130
• /
• 2010

A steering control system based on CAN(Controller Area Network) for autonomous tractor was developed to reduce duty of a central processing computer and to improve performance of steering control in terms of reduced control interval and error. The steering control system consisted of a SCU (Steering Control Unit), an EHPS system, and a potentiometer. The SCU consisted of an MCU (Micro Controller unit), an A/D converter, and a DC-DC converter, and a PID controller was used to control steering angle. The steering control system was communicated with the computer by CAN-bus. Each actuator and implement was connected to a multi-function board interfacing with the computer through a USB cable. Without CAN, control interval of the autonomous tractor was 1.5 seconds. When the CAN-based steering control system was combined with the autonomous tractor, however, control interval of the integrated system was reduced to those less than 0.05 seconds. When the autonomous tractor was operated with 1.5-s and 0.05-s control cycles at a 0.63-m/s travelling speed, the trajectories were close to straight lines for both of the control cycles. For a 1.34-m/s traveling speed, tractor trajectory was close to sine wave with a 1.5-s control cycle, but was straight line with a 0.05-s control cycle.

• 전기의세계
• /
• v.29 no.12
• /
• pp.791-797
• /
• 1980

This paper is concerned with the study of improving the faults of phase control scheme and suggesting a new approach to the control of load circuit with AC source. AC current control can restrict the magnitude of current within the given upper and lower current and make current continuous during every cycle. Also the harmonic contents of current can be greatly reduced using this control scheme. Analog computer and digital computer simulations reveal that the current control scheme is superior to the phase control scheme in controlling the power supply to the load R-L. Experimintal results demonstrate the feasibility and verify the operation of current controlled system.