• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1807-1810
• /
• 2003

The formed tool is used to machine the unique shape of rubber seal for geometrical shaping and reduction of cutting time. The bearing rubber seal produced by hot press forming has complex geometry for the complex geometrical shape to prevent leakage of lubricant oil and influx of the dust effectively. Because it is difficult to machine the unique shape exactly by the conventional tool, the formed tool is used in machining mold of the seal. In this paper, It is performed for selection of the formed tool to investigate cutting edge wear, cutting force, and surface quality. Also, an efficient high precision machining is proposed on the experiment data.

• 대한치과보철학회지
• /
• 제57권4호
• /
• pp.483-489
• /
• 2019

디지털치의학의 발달과 함께 computer-aided design and computer-aided manufacturing (CAD/CAM)을 이용한 3D 제작산업이 최근 급격한 성장을 하고 있다. 디지털 방식을 이용한 의치 제작 또한 최근의 디지털치의학 기술의 발전으로 증가하는 추세에 있다. CAD/CAM 제작방법은 크게 두가지 타입으로 나눌 수 있다: 절삭가공, 적층가공, 밀링과 같은 절삭가공은 블록 형태의 재료를 깎아 제조하는 기술을 토대로 하며, 3D printing과 같은 적층가공은 재료를 적층 방식으로 쌓아 올려 제조하는 기술을 토대로 한다. 적층가공은 밀링이 어려운 복잡한 구조의 제작에 적용할 수 있다. 본 증례에서, 적층가공방법이 레진상 총의치 제작에 이용되었다. 디지털방식을 적용한 의치의 사용기간동안 기능적, 심미적으로 만족할 만한 결과를 보여주었다.

• 한국기계가공학회지
• /
• 제16권3호
• /
• pp.119-124
• /
• 2017

Machining optimization using typical computer-aided manufacturing (CAM) software mainly depends on tool paths, and it is impossible to predict the behavior of material or cutting force. In this paper, cutting force analysis simulation is performed on the Unibody Case of a mobile phone with the aim of optimizing cutting-force-based machining using the Third Wave Systems' AdventEdge Production Module. Machining time after optimization was shortened by 42% for roughing compared to pre-optimization, and actual machining time was reduced by 36.8%. For finishing, machining time was reduced by 92%, and actual machining time was reduced around 90%. A surface roughness analysis found that the post-optimization surface roughness was $1.16{\mu}m$ Ra, compared to a pre-optimization value of $1.75{\mu}m$ Ra.

• 한국안전학회지
• /
• 제22권6호
• /
• pp.74-80
• /
• 2007

In manufacturing industry, machining technology for metal cutting processes has been considered traditional and economic dimensions such as production cost, production time and quality of a final product. However, owing to governmental regulations and the change of owner's cognizance, the safety of the workers becomes important in those fields. In this paper, the operation planning system developed as a key component of CAPP(Computer Aided Process Planning) system is introduced for milling operations. The main issue in the system is to determine the cutting conditions in achieving a balanced consideration of productivity and worker's safety. For this reason, the system performs the modification process of standard cutting conditions to satisfy those requirements. Related to machining safety in metal cutting, representative and habitual mistakes that operators perform without considering carefully the characteristic of machine or work piece are described and then the detailed algorithm and functions of the developed system is introduced and discussed.

• 한국시뮬레이션학회논문지
• /
• 제15권4호
• /
• pp.137-142
• /
• 2006

현대의 산업공정에서 CAD(Computer-Aided Design)는 설계 및 생산에 관련된 다양한 분야에서 빠져서는 안 될 중요한 분야로 자리매김 하였다. 그러나 생산 설계의 복잡도가 증가 할수록, 그와 관련된 다양한 공학 기술들이 필요로 하게 되었다. 이 논문에서는 CAD기반의 그레이팅 설계 자동화 시스템에서 분할을 고려하는 배치에 대하여 다룬다. 그레이팅 설계 디자인에서 생산 비용 절감의 핵심은 분할을 최소로 하는 디자인을 설계하는 것이다. 이를 해결하기 위하여 그레이팅 분할 배치 문제에 유전 알고리즘을 적용하여 근사 해를 탐색한다. 각 제약 조건들에 우선순위를 두어 적합도를 측정하고, 분할 섹션들을 해 집합으로 구성하여 교배와 선택 연산을 수행함으로써 해를 구하고 시뮬레이션을 통해서 제안된 방법의 효율성을 평가한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.255-259
• /
• 1987

This paper introduces the system AUTO-CUT for the automatic generation of NC tapes for wire-cut EDM (Electrodischarge Machining) parts. The information input to the system is the description of the part geometries, the tool motions and the cutting conditions etc. The system generates CLDATA. Also dynamic graphic display of the tool motions can be-performed on the screen.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
• /
• pp.91-94
• /
• 2002

SFFS(Solid Freeform Fabrication System) is commercializing to rapid prototyping concept in foreign some corporations including the U.S.A, have much technological problems yet and need new mode for agile prototyping. In this paper, we design algorithm that the cutting path of laser beam, on the SFFS(Solid Freeform Fabrication System), is controlled with constant speed. The designed algorithm for constant-speed path control is implemented and experimented in the CAFL$\^$VM/ (Computer Aided Fabrication of Lamination for Various Material) system, the new SFFS which was developed in this paper.

• 한국CDE학회논문집
• /
• 제7권3호
• /
• pp.148-156
• /
• 2002

Most Rapid Prototyping (RP) processes adopt a solid Computer Aided Design (CAD) model, which will be sliced into thin layers of constant thickness in the building direction. Each cross-sectional layer is successively deposited and, simultaneously, bonded onto the previous layer; and eventually the stacked layers from a physical part of the model. A new RP process, the transfer-type Variable Lamination Manufacturing process using expandable polystyrene foam sheet (VLM-ST), has been developed to reduce building time and to improve the surface finish of parts with the thick layers and a sloping surface. This paper describes the generation of Unit Shape Layer (USL), the cutting path data of the linen. hotwire cutter for the VLM-ST process. USL is a three-dimensional layer with a thickness of more than 1 mm and a side slope, and it is the basic unit of cutting and building in the VLM-ST process. USL includes data such as layer thickness, positional coordinates, side angles of each layer, hotwire cutting speed, the heat input to the hotwire, and reference shape. The procedure of generating USL is as follows: (1)Generation of the mid-slice from the CAD model, (2)Conversion of the mid-slice into a simply connected domain, (3)Generation to the reference shape for the mid-slice, (4)Calculation of the rotation angle of the hotwire of the cutting system.

• 한국안전학회지
• /
• 제21권6호
• /
• pp.116-121
• /
• 2006

절삭가공에서 가공조건은 가공비용의 감소와 제품 품질의 향상에 영향을 주는 주요 요인 중의 하나이다. 일반적으로 공정설계자는 제품의 목표 품질을 만족하는 범위 내에서 비용을 줄일 수 있는 가공조건을 결정하기 위하여, 가공조건 핸드북 등에서 제공하는 표준 가공조건을 세부 공정별 요구 사항이 만족되도록 경험을 기반으로 수정한 후 작업자의 안전에 문제가 없는 지 검토한다. 본 논문에서는 공정설계자의 경험에 의해 수행되는 일련의 과정을 신경회로망 모델과 규칙에 의해 모델링한 작업설계시스템을 소개한다. 개발된 시스템은 각주형 부품의 밀링 작업에서 (1) 표준 가공조건을 세부 공정별 요구 사항이 만족되도록 신경회로망 모텔에 의해 수정하고, (2) 다음으로 작업자의 안전을 만족하도록 수정된 가공 조건을 필터링하는 모듈로 구성된다. 본 논문에서는 우선 개발된 밀링 작업설계시스템의 전반적인 기능을 간략히 소개한 후, 제안된 방법론에 의한 의사결정 과정을 자세히 기술한다. 마 지막으로 실제 적용 예를 통하여 개발된 시스템의 성능을 예시하도록 한다.

• 한국정밀공학회지
• /
• 제22권4호
• /
• pp.68-75
• /
• 2005

This paper presents a new method for the optimization of feed rate in sculptured surface machining. A NC verification model based on Z-map was utilized to obtain chip load according to feed per tooth. This optimization method can regenerate a new NC program with respect to the commanded cutting conditions and the NC program that was generated from CAM system. The regenerated NC program has not only the same data of the ex-NC program but also the updated feed rate in every block. The new NC data can reduce the cutting time and produce precision products with almost even chip load to the feed per tooth. This method can also reduce tool chipping and make constant tool wear.