• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.187-190
• /
• 2007

This study is for analyzing best band in image matching using correlation coefficient of left and right images of stereo image pair, lot red, green, blue band images separated from color aerial photo and gray image converted from the same color aerial photo image. The image matching is applied to construct Digital Elevation Model(DEM) or terrain data. The correlation coefficients and variation by change of pixel patch size are computed from pixel patches of which sizes are $11{\times}11{\sim}101{\times}101$. Consequently, the correlation coefficient in red band image is highest. The lowest is in blue band. Therefore, to construct terrain data using image matching, the red band image is preferable. As the size of pixel patch is growing, the correlation coefficient is increasing. But increasing rate declines from $51{\times}51$ image patch size and above. It is proved that the smaller pixel patch size than $51{\times}51$ is applied to construct terrain data using image matching.

• Journal of Advanced Navigation Technology
• /
• v.14 no.3
• /
• pp.375-383
• /
• 2010

In this paper, the correlation between voice vowels and human body is analysed for the voice therapy and diagnosis. Using vowels('a', 'e', 'i', 'o', 'u'), the vibration signals in head, chest and belly is measured with the voice signal. As the result, it is shown that body characteristics can be checked from some vowels, and the correlation coefficient of body vibration signal and BMI(body mass index) is computed. From the result, using voice signal and body vibrations, the body diagnosis model is proposed.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.3
• /
• pp.413-420
• /
• 2018

This paper documents the result of a preliminary analysis on the influence of hull-ice friction coefficient on model resistance and power predictions and their correlation to full-scale measurements. The study is based on previous model-scale/full-scale correlations performed on the National Research Council - Ocean, Coastal, and River Engineering Research Center's (NRC/OCRE-RC) model test data. There are two objectives for the current study: (1) to validate NRC/OCRE-RC's modeling standards in regarding to its practice of specifying a CFC (Correlation Friction Coefficient) of 0.05 for all its ship models; and (2) to develop a correction methodology for its resistance and propulsion predictions when the model is prepared with an ice friction coefficient slightly deviated from the CFC of 0.05. The mean CFC of 0.056 and 0.050 for perfect correlation as computed from the resistance and power analysis, respectively, have justified NRC/OCRE-RC's selection of 0.05 for the CFC of all its models. Furthermore, a procedure for minor friction corrections is developed.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.2
• /
• pp.77-87
• /
• 1996

Existing area-based stereo matching algorithms utilize a single rectangular correlation area for computing cross-correlation between corresponding points in stereo images, and compute disparity by finding the peak in the vicinity of depth discontinuity, since, because of inconstnat disparities around discontinuities, the cross-correlation becomes low in such area. Inthis paper, a new area-based matching strategy is proposed exploiting multiple directional correlation masks instead of a single one. The proposed technique computes multiple cross-covariance functions using each oriented mask. Peaks are detected from each covariance function and the disparity is computed by choosing the location with the highest covariance value. Proposed approach can also be applied to compute disparity gradients without obtaining dense depth data. A number of examples are presented using synthetic and natural stereo images.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.26-33
• /
• 2014

The spatial correlation (SC) for a multipath environment based on a $2{\times}2$ MIMO system are computed on the observation planes in the Rayleigh/Rician fading channels inside a mode stirred chamber. The correlation coefficients were obtained and compared for different distances and orthogonal polarization between two transmit antennas. The proposed method is useful for quantifying the potential diversity gain in antenna diversity systems.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.262-265
• /
• 2007

Preliminary results are reported on ship detection using coherence images computed from cross-correlating images of multi-look-processed dual-polarization data (HH and HV) of ENVISAT ASAR. The traditional techniques of ship detection by radars such as CFAR (Constant False Alarm Rate) rely on the amplitude data, and therefore the detection tends to become difficult when the amplitudes of ships images are at similar level as the mean amplitude of surrounding sea clutter. The proposed method utilizes the property that the multi-look images of ships are correlated with each other. Because the inter-look images of sea surface are covered by uncorrelated speckle, cross-correlation of multi-look images yields the different degrees of coherence between the images and water. The polarimetric information of ships, land and intertidal zone are first compared based on the cross-correlation between HH and HV. In the next step, we examine the technique when the dual-polarization data are split into two multi-look Images.

• Restorative Dentistry and Endodontics
• /
• v.42 no.4
• /
• pp.273-281
• /
• 2017

Objectives: The aims of this study were to quantify tug-back by measuring the pulling force and investigate the correlation of clinical tug-back pulling force with in vitro gutta-percha (GP) cone adaptation score using micro-computed tomography (${\mu}CT$). Materials and Methods: Twenty-eight roots from human single-rooted teeth were divided into 2 groups. In the ProTaper Next (PTN) group, root canals were prepared with PTN, and in the ProFile (PF) group, root canals were prepared using PF (n = 14). The degree of tug-back was scored after selecting taper-matched GP cones. A novel method using a spring balance was designed to quantify the tug-back by measuring the pulling force. The correlation between tug-back scores, pulling force, and percentage of the gutta-percha occupied area (pGPOA) within apical 3 mm was investigated using ${\mu}CT$. The data were analyzed using Pearson's correlation analysis, one-way analysis of variance (ANOVA) and Tukey's test. Results: Specimens with a strong tug-back had a mean pulling force of 1.24 N (range, 0.15-1.70 N). This study showed a positive correlation between tug-back score, pulling force, and pGPOA. However, there was no significant difference in these factors between the PTN and PF groups. Regardless of the groups, pGPOA and pulling force were significantly higher in the specimens with a higher tug-back score (p < 0.05). Conclusions: The degree of subjective tug-back was a definitive determinant for master cone adaptation in the root canal. The use of the tug-back scoring system and pulling force allows the interpretation of subjective tug-back in a more objective and quantitative manner.

• Nuclear Engineering and Technology
• /
• v.49 no.2
• /
• pp.395-403
• /
• 2017

An efficient evaluation method for the probability of a tornado missile strike without using the Monte Carlo method is proposed in this paper. A major part of the proposed probability evaluation is based on numerical results computed using an in-house code, Tornado-borne missile analysis code, which enables us to evaluate the liftoff and flight behaviors of unconstrained objects on the ground driven by a tornado. Using the Tornado-borne missile analysis code, we can obtain a stochastic correlation between local wind speed and flight distance of each object, and this stochastic correlation is used to evaluate the conditional strike probability, $Q_V(r)$, of a missile located at position r, where the local wind speed is V. In contrast, the annual exceedance probability of local wind speed, which can be computed using a tornado hazard analysis code, is used to derive the probability density function, p(V). Then, we finally obtain the annual probability of tornado missile strike on a structure with the convolutional integration of product of $Q_V(r)$ and p(V) over V. The evaluation method is applied to a simple problem to qualitatively confirm the validity, and to quantitatively verify the results for two extreme cases in which an object is located just in the vicinity of or far away from the structure.

• Journal of The Korean Society of Emergency Medicine
• /
• v.26 no.1
• /
• pp.29-37
• /
• 2015

Purpose: Stool exams are a useful tool for the early presumptive diagnosis of infectious bacterial diarrhea in the Emergency Department (ED). CT scans are often used to increase the physician's level of certainty and to facilitate patient triage by identifying the source of pain in most patients with an acute abdomen in the ED. This study was designed to investigate the correlation between stool exams and abdominal CT in patients with acute diarrhea visiting the ED. Methods: We conducted a retrospective study in the emergency department of a national university hospital from January 1, 2012 to June 30, 2013. The subjects consisted of 156 patients with acute diarrhea and abdominal pain who had stool exam results and abdominal CT findings. We divided the patients into three groups according to the stool exam results. Simultaneously, we evaluated their CT findings of the bowel and adjacent structures. Results: A total of 156 patients were enrolled. Frequency of abnormal CT findings showed statistically significant correlation with stool exams (p-value <0.001). Abnormal CT findings increased as WBCs and RBCs in stool increased (p-value <0.001). Conclusion: The stool exam was a statistically significant predictive variable in indirectly determining the severity of acute diarrhea and it showed correlation with the frequency of abnormal CT findings. It is suggested that stool exams can be used as a susceptible marker for predicting the probability of severe infectious colitis, and for making an early decision regarding close medical attention.

• Journal of Periodontal and Implant Science
• /
• v.51 no.2
• /
• pp.88-99
• /
• 2021

Purpose: Direct intraoral scanning and superimposing methods have recently been applied to measure the dimensions of periodontal tissues. The aim of this study was to analyze various correlations between labial gingival thickness and underlying alveolar bone thickness, as well as clinical parameters among 3 tooth types (central incisors, lateral incisors, and canines) using a digital method. Methods: In 20 periodontally healthy subjects, cone-beam computed tomography images and intraoral scanned files were obtained. Measurements of labial alveolar bone and gingival thickness at the central incisors, lateral incisors, and canines were performed at points 0-5 mm from the alveolar crest on the superimposed images. Clinical parameters including the crown width/crown length ratio, keratinized gingival width, gingival scallop, and transparency of the periodontal probe through the gingival sulcus were examined. Results: Gingival thickness at the alveolar crest level was positively correlated with the thickness of the alveolar bone plate (P<0.05). The central incisors revealed a strong correlation between labial alveolar bone thickness at 1 and 2 mm, respectively, inferior to the alveolar crest and the thickness of the gingiva at the alveolar crest line (G0), whereas G0 and labial bone thickness at every level were positively correlated in the lateral incisors and canines. No significant correlations were found between clinical parameters and hard or soft tissue thickness. Conclusions: Gingival thickness at the alveolar crest level revealed a positive correlation with labial alveolar bone thickness, although this correlation at identical depth levels was not significant. Gingival thickness, at or under the alveolar crest level, was not associated with the clinical parameters of the gingival features, such as the crown form, gingival scallop, or keratinized gingival width.