• 제목/요약/키워드: Computation Time

검색결과 3,149건 처리시간 0.03초

수중조류제거(水中藻類除去)를 위한 가압부상(加壓浮上)에 있어서 기포(氣泡)의 양태(模態)에 관한 연구(研究) (A Study on the Shape and Movement in Dissolved Air Flotation for the Algae Removal)

  • 김환기;정태섭
    • 대한토목학회논문집
    • /
    • 제4권4호
    • /
    • pp.79-93
    • /
    • 1984
  • 수중조류(水中藻類) 제거(除去)하기 위한 공법(工法)의 하나로 가압부상법(加壓浮上法)은 아주 효과적(効果的)이다. 이러한 가압부상법(加壓浮上法)의 효율(効率)에 영향을 미치는 요소(要素)로는 시료수(試料水)에 대(對)한 가압수(加壓水)의 체적비율(體積比率), 가압수(加壓水)의 압력(壓力), 접촉시간(接觸時間), 응집제(凝集劑)의 종류(種類) 및 투여량, 수온(水溫), 반응조내(反應槽內)의 물의 흐름상태, 기포(氣泡)의 크기 및 상승속도(上昇速度), 그리고 기포(氣泡)와 입자(粒子)간의 접착(接着) 등이다. 본(本) 연구(硏究)에 있어서는 모형조내(模型槽內)에서 실제의 기포(氣泡) 상승속도(上昇速度)와 이론적(理論的)인 상승속도(上昇速度)와의 비교, 기포(氣泡)와 입자(粒子)간의 접착현상(接着現象) 규명 기포(氣泡)의 크기 및 상승속도(上昇速度)가 수중조류(水中藻類) 제거공정(除去工程)에 미치는 영향 등을 규명함으로써 가압부상법(加壓浮上法)의 합리적(合理的)인 적용방법(適用方法)을 검토(檢討)하였다. 수중조류(水中藻類) 제거(除去)를 위하여 기포(氣泡)의 발생(發生)과 기포(氣泡)의 크기 변화(變化)과정 및 기포(氣泡)의 부상속도(浮上速度), 기포(氣泡)와 입자(粒子)간의 접착현상(接着現象), 연속식(連續式) 가압부상(加壓浮上) 실험(實驗)의 이론적(理論的) 고찰과 실험적(實驗的) 증명에 의(依)하여 얻은 결과(結果)는 다음과 같다. 기포(氣泡) 상승속도식(上昇速度式)은 스톡스 방정식(方程式)보다 아이브스 식(式)이 더 적합(適合)하다. 기포(氣泡)와 조류(藻類)와의 결합(結合)은 컨벡티브 타입이었으며 부착현상(附着現象)과 충돌현상(衝突現象)보다 흡수현상(吸收現象)에 의(依)한 접착(接着)이 많았다. 기포(氣泡)와 크기는 $100{\mu}m$ 보다 작으며 반응조내(反應槽內)의 유동(流動)이 적을 때가 처리효율(處理効率)이 좋았다. 또한, 본(本) 실험(實驗)에 사용(使用)된 연속식(連續式) 가압부상(加壓浮上) 장치의 최적조건(最適條件)으로는 시료수(試料水)에 대(對)한 가압수(加壓水)의 체적비(體積比)가 15%, 반응조내(反應槽內) 체류시간은 15분(分), 가압수(加壓水) 압력(壓力) $4kg/cm^2$, 가압수(加壓水) 분사기(噴射機)의 시료수(試料水) 유입구(流入口)와의 거리는 30cm 이었으며 온수(水溫)의 변화(變化)에 따른 처리효율(處理効率)의 변동은 거의 없었으며 처리효율(處理効率)은 85~91% 였다.

  • PDF

투수성 호안의 해수유통을 고려한 유동 수치모델링 (Numerical Hydrodynamic Modeling Incorporating the Flow through Permeable Sea-Wall)

  • 방기영;박성진;김선우;조창우;김태인;송용식;우승범
    • 한국해안·해양공학회논문집
    • /
    • 제25권2호
    • /
    • pp.63-75
    • /
    • 2013
  • 평택 당진항 내항 2공구 수역은 3개의 투수성 호안으로, 그리고 내항 2공구 동측의 투기장 수역은 2개의 투수성 호안으로 둘러싸여 있다. 2010년 5월에 관측된 내항 2공구 외곽호안 내측 수역과 내항 2공구 투기장 내측 수역의 최대조차는 각각 4.70 m와 2.32 m로서, 동시에 호안 외측에서 관측된 최대조차 8.74 m의 54%와 27%에 달한다. 호안 내 외수위차와 내측 수용적 변화율간의 회귀식을 도출하고, 이 식을 이용하여 투수성 호안의 해수 유통량을 매 계산시간마다 산정하는 모듈을 EFDC 모델에 추가하여 아산만의 3차원 해수유동 수치모형을 구축하였다. 2010년 5월 13~27일의 모의기간에 대하여 주요 5개 분조($M_2$, $S_2$, $K_1$, $O_1$, $N_2$)의 합성조석과 아산, 삽교, 남양, 석문방조제의 담수방류량을 실시간으로 입력하여 해수유동을 모의하였다. 2공구 내측과 2공구 투기장 내측에서 평균고조위, 평균해면과 평균저조위의 실측치에 대한 모델치의 skill score는 96~100%로서 매우 양호한 재현율을 보인다. 투수성 호안의 해수유통을 차단한 모의결과와 비교하면, 최강유속은 주수로를 따라 0.05~0.10 m/s 증가하고, 2공구 외곽호안 외측에서 국지적으로 0.1~0.2 m/s 증가한다. 해저면 전단응력은 유속이 강한 주수로에서 0.1~0.4 $N/m_2$의 범위로 증가하고, 2공구 외곽호안 우각부 주변에서 국지적으로 0.4 $N/m_2$ 이상 증가한다. 본 연구에서 적용한 투수성 호안의 해수유통 모의기법은 대규모 투수성 호안이 유지되는 해역에서 물질의 이류 확산과 해저지형의 침식 퇴적 및 호안 주변의 국부 세굴 등을 모의 예측하는데 유용하게 적용될 수 있다.

반복적 대화식 통합 탄성파 속도분석 (An Iterative, Interactive and Unified Seismic Velocity Analysis)

  • 서상용;정부흥;장성형
    • 지구물리와물리탐사
    • /
    • 제2권1호
    • /
    • pp.26-32
    • /
    • 1999
  • 탄성파 속도분석법은 일괄식 속도분석법과 대화식 속도 분석등 두 가지가 있다. 일괄식 속도분석법에서는 각 속도 분석점마다 셈블런스 컨투어, 슈퍼게더 및 중합 패널등을 일괄 작성하여 도면화 시킨 후 분석자가 그 도면을 보고 속도 함수를 결정하는 방법이다. 과거 유행한 전산처리 소프트웨어들이 이 방법을 사용하고 있다. 그러나 이 방법은 도면 분석시 아주 많은 수작업이 필요하고 속도분석 결과도 정밀치 못하다는 단점이 있다. 최근에는 워크스테이션의 고속 그래픽 기능을 이용한 대화식 속도분석 기술이 개발되었다. 그런데 이들 프로그램은 기존 일괄식 속도분석법과 대동소이한 내용을 그래픽 화면으로 처리할 수 있도록 함으로써 종이 절약 외에는 특별히 나아진 것이 없다. 프로그램의 주 기능은 속도 스펙트럼에서 속도점 노드를 선택하는 것이며, 입력자료에 있을 수 있는 잡음을 제거하여 다시 속도 스펙트럼을 수정하는 기능은 없다. 잡음의 제거없이 계산한 부정확한 속도 스펙트럼을 이용해서 속도 함수를 선정한다면 정밀 속도분석은 불가능할 것이다. 방대한 탄성파 탐사자료에 대한 속도분석을 신속 정확하게 수행하기 위해서는 속도 분석과 밀접한 관련이 있는 전산처리 공정들 즉, 슈퍼게더 조립, 셈블런스 계산, 동보정, 뮤트, 중합등을 동시에 지원하는 통합된 반복적 대화식 속도분석 프로그램이 필요하다. 분석 구간의 속도와 뮤트함수를 변화시켰을 때 그로부터 얻어지는 셈블런스와 동보정 및 중합을 검토하고 이러한 수정과 검토를 신속히 반복할 수 있도록 함으로써 정확한 속도분석이 가능하기 때문이다. 여기에서는 속도분석을 신속 정확하게 수행하기 위해 속도 분석과 밀접한 관련이 있는 전산처리 공정들 즉, 슈퍼게더 조립, 셈블런스 계산, 동보정, 뮤트, 중합등을 동시에 지원하는 대화식 속도분석 프로그램 xva를 작성하였다. 대화식 속도분석에서는 분석 구간의 트레이스들을 고속으로 참조해야 하는데 이를 위해 간단한 트레이스 인덱스 파일을 설계하여 사용하였다. 직접파와 굴절파등 천부 잡음을 제거하기 위한 효과적인 수단인 뮤트 함수 영역 변환법을 새로 고안하였으며, 본 프로그램은 이 기법을 이용하고 있다. 본 영 역 변환법은 기존 알려진 역동보정법과 같이 정밀 전산처리가 가능할 뿐만 아니라 동보정과 역동보정시 발생하는 자료의 내삽 오차가 없으며 계산 시간이 크게 단축되기 때문에 정밀 대화식 속도 분석에 사용 가능하다. 프로그램 xva는 28개의 소스 파일로 구성된 패키지인데 줄 수는 12,029, 단어 수는 34,990, 글자 수는 304,073이다. 프로그램 xva는 X-Window와 Motif 환경하에서 작동한다. 프로그램 메뉴는 Motif 표준 스타일에 따라 작성하였는 바 그 사용법을 간략히 기술하였다. 본 프로그램이 완성됨으로 인하여 정밀 탄성파 속도 분석이 가능하게 되었고 그 결과 가스층의 존재 여부를 직접 확인할 수 있는 AVO(Amplitude Versus Offset)단면도등의 제작에 활용할 수 있었다.

  • PDF

병원 간호사의 선호근무시간대에 관한 연구 (A Study on Hoslital Nurses' Preferred Duty Shift and Duty Hours)

  • 이경식;정금희
    • 대한간호
    • /
    • 제36권1호
    • /
    • pp.77-96
    • /
    • 1997
  • The duty shifts of hospital nurses not only affect nurses' physical and mental health but also present various personnel management problems which often result in high turnover rates. In this context a study was carried out from October to November 1995 for a period of two months to find out the status of hospital nurses' duty shift patterns, and preferred duty hours and fixed duty shifts. The study population was 867 RNs working in five general hospitals located in Seoul and its vicinity. The questionnaire developed by the writer was used for data collection. The response rate was 85.9 percent or 745 returns. The SAS program was used for data analysis with the computation of frequencies, percentages and Chi square test. The findings of the study are as follows: 1. General characteristics of the study population: 56 percent of respondents was (25 years group and 76.5 percent were "single": the predominant proportion of respondents was junior nursing college graduates(92.2%) and have less than 5 years nursing experience in hospitals(65.5%). For their future working plan in nursing profession, nearly 50% responded as uncertain The reasons given for their career plan was predominantly 'personal growth and development' rather than financial reasons. 2. The interval for rotations of duty stations was found to be mostly irregular(56.4%) while others reported as weekly(16.1%), monthly(12.9%), and fixed terms(4.6%). 3. The main problems related to duty shifts particularly the evening and night duty nurses reported were "not enough time for the family, " "afraid of security problems after the work when returning home late at night." and "lack of leisure time". "problems in physical and physiological adjustment." "problems in family life." "lack of time for interactions with fellow nurses" etc. 4. The forty percent of respondents reported to have '1-2 times' of duty shift rotations while all others reported that '0 time'. '2-3 times'. 'more than 3 times' etc. which suggest the irregularity in duty shift rotations. 5. The majority(62.8%) of study population found to favor the rotating system of duty stations. The reasons for favoring the rotation system were: the opportunity for "learning new things and personal development." "better human relations are possible. "better understanding in various duty stations." "changes in monotonous routine job" etc. The proportion of those disfavor the rotating 'system was 34.7 percent. giving the reasons of"it impedes development of specialization." "poor job performances." "stress factors" etc. Furthermore. respondents made the following comments in relation to the rotation of duty stations: the nurses should be given the opportunity to participate in the. decision making process: personal interest and aptitudes should be considered: regular intervals for the rotations or it should be planned in advance. etc. 6. For the future career plan. the older. married group with longer nursing experiences appeared to think the nursing as their lifetime career more likely than the younger. single group with shorter nursing experiences ($x^2=61.19.{\;}p=.000;{\;}x^2=41.55.{\;}p=.000$). The reason given for their future career plan regardless of length of future service, was predominantly "personal growth and development" rather than financial reasons. For further analysis, the group those with the shorter career plan appeared to claim "financial reasons" for their future career more readily than the group who consider the nursing job as their lifetime career$(x^2$= 11.73, p=.003) did. This finding suggests the need for careful .considerations in personnel management of nursing administration particularly when dealing with the nurses' career development. The majority of respondents preferred the fixed day shift. However, further analysis of those preferred evening shift by age and civil status, "< 25 years group"(15.1%) and "single group"(13.2) were more likely to favor the fixed evening shift than > 25 years(6.4%) and married(4.8%)groups. This differences were statistically significant ($x^2=14.54, {\;}p=.000;{\;}x^2=8.75, {\;}p=.003$). 7. A great majority of respondents(86.9% or n=647) found to prefer the day shifts. When the four different types of duty shifts(Types A. B. C, D) were presented, 55.0 percent of total respondents preferred the A type or the existing one followed by D type(22.7%). B type(12.4%) and C type(8.2%). 8. When the condition of monetary incentives for the evening(20% of salary) and night shifts(40% of. salary) of the existing duty type was presented. again the day shift appeared to be the most preferred one although the rate was slightly lower(66.4% against 86.9%). In the case of evening shift, with the same incentive, the preference rates for evening and night shifts increased from 11.0 to 22.4 percent and from 0.5 to 3.0 percent respectively. When the age variable was controlled. < 25 yrs group showed higher rates(31.6%. 4.8%) than those of > 25 yrs group(15.5%. 1.3%) respectively preferring the evening and night shifts(p=.000). The civil status also seemed to operate on the preferences of the duty shifts as the single group showed lower rate(69.0%) for day duty against 83. 6% of the married group. and higher rates for evening and night duties(27.2%. 15.1%) respectively against those of the married group(3.8%. 1.8%) while a higher proportion of the married group(83. 6%) preferred the day duties than the single group(69.0%). These differences were found to be statistically all significant(p=.001). 9. The findings on preferences of three different types of fixed duty hours namely, B, C. and D(with additional monetary incentives) are as follows in order of preference: B type(12hrs a day, 3days a wk): day shift(64.1%), evening shift(26.1%). night shift(6.5%) C type(12hrs a day. 4days a wk) : evening shift(49.2%). day shift(32.8%), night shift(11.5%) D type(10hrs a day. 4days a wk): showed the similar trend as B type. The findings of higher preferences on the evening and night duties when the incentives are given. as shown above, suggest the need for the introductions of different patterns of duty hours and incentive measures in order to overcome the difficulties in rostering the nursing duties. However, the interpretation of the above data, particularly the C type, needs cautions as the total number of respondents is very small(n=61). It requires further in-depth study. In conclusion. it seemed to suggest that the patterns of nurses duty hours and shifts in the most hospitals in the country have neither been tried for different duty types nor been flexible. The stereotype rostering system of three shifts and insensitiveness for personal life aspect of nurses seemed to be prevailing. This study seems to support that irregular and frequent rotations of duty shifts may be contributing factors for most nurses' maladjustment problems in physical and mental health. personal and family life which eventually may result in high turnover rates. In order to overcome the increasing problems in personnel management of hospital nurses particularly in rostering of evening and night duty shifts, which may related to eventual high turnover rates, the findings of this study strongly suggest the need for an introduction of new rostering systems including fixed duties and appropriate incentive measures for evenings and nights which the most nurses want to avoid, In considering the nursing care of inpatients is the round-the clock business. the practice of the nursing duty shift system is inevitable. In this context, based on the findings of this study. the following are recommended: 1. The further in-depth studies on duty shifts and hours need to be undertaken for the development of appropriate and effective rostering systems for hospital nurses. 2. An introduction of appropriate incentive measures for evening and night duty shifts along with organizational considerations such as the trials for preferred duty time bands, duty hours, and fixed duty shifts should be considered if good quality of care for the patients be maintained for the round the clock. This may require an initiation of systematic research and development activities in the field of hospital nursing administration as a part of permanent system in the hospital. 3. Planned and regular intervals, orientation and training, and professional and personal growth should be considered for the rotation of different duty stations or units. 4. In considering the higher degree of preferences in the duty type of "10hours a day, 4days a week" shown in this study, it would be worthwhile to undertake the R&D type studies in large hospital settings.

  • PDF

GPU Based Feature Profile Simulation for Deep Contact Hole Etching in Fluorocarbon Plasma

  • Im, Yeon-Ho;Chang, Won-Seok;Choi, Kwang-Sung;Yu, Dong-Hun;Cho, Deog-Gyun;Yook, Yeong-Geun;Chun, Poo-Reum;Lee, Se-A;Kim, Jin-Tae;Kwon, Deuk-Chul;Yoon, Jung-Sik;Kim3, Dae-Woong;You, Shin-Jae
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
    • /
    • pp.80-81
    • /
    • 2012
  • Recently, one of the critical issues in the etching processes of the nanoscale devices is to achieve ultra-high aspect ratio contact (UHARC) profile without anomalous behaviors such as sidewall bowing, and twisting profile. To achieve this goal, the fluorocarbon plasmas with major advantage of the sidewall passivation have been used commonly with numerous additives to obtain the ideal etch profiles. However, they still suffer from formidable challenges such as tight limits of sidewall bowing and controlling the randomly distorted features in nanoscale etching profile. Furthermore, the absence of the available plasma simulation tools has made it difficult to develop revolutionary technologies to overcome these process limitations, including novel plasma chemistries, and plasma sources. As an effort to address these issues, we performed a fluorocarbon surface kinetic modeling based on the experimental plasma diagnostic data for silicon dioxide etching process under inductively coupled C4F6/Ar/O2 plasmas. For this work, the SiO2 etch rates were investigated with bulk plasma diagnostics tools such as Langmuir probe, cutoff probe and Quadruple Mass Spectrometer (QMS). The surface chemistries of the etched samples were measured by X-ray Photoelectron Spectrometer. To measure plasma parameters, the self-cleaned RF Langmuir probe was used for polymer deposition environment on the probe tip and double-checked by the cutoff probe which was known to be a precise plasma diagnostic tool for the electron density measurement. In addition, neutral and ion fluxes from bulk plasma were monitored with appearance methods using QMS signal. Based on these experimental data, we proposed a phenomenological, and realistic two-layer surface reaction model of SiO2 etch process under the overlying polymer passivation layer, considering material balance of deposition and etching through steady-state fluorocarbon layer. The predicted surface reaction modeling results showed good agreement with the experimental data. With the above studies of plasma surface reaction, we have developed a 3D topography simulator using the multi-layer level set algorithm and new memory saving technique, which is suitable in 3D UHARC etch simulation. Ballistic transports of neutral and ion species inside feature profile was considered by deterministic and Monte Carlo methods, respectively. In case of ultra-high aspect ratio contact hole etching, it is already well-known that the huge computational burden is required for realistic consideration of these ballistic transports. To address this issue, the related computational codes were efficiently parallelized for GPU (Graphic Processing Unit) computing, so that the total computation time could be improved more than few hundred times compared to the serial version. Finally, the 3D topography simulator was integrated with ballistic transport module and etch reaction model. Realistic etch-profile simulations with consideration of the sidewall polymer passivation layer were demonstrated.

  • PDF

농업기상재해 조기경보시스템에서의 고해상도 격자형 자료의 처리 속도 향상 기법 (Speed-up Techniques for High-Resolution Grid Data Processing in the Early Warning System for Agrometeorological Disaster)

  • 박주현;신용순;김성기;강위수;한용규;김진희;김대준;김수옥;심교문;박은우
    • 한국농림기상학회지
    • /
    • 제19권3호
    • /
    • pp.153-163
    • /
    • 2017
  • 데이터 처리 속도는 예보 능력과 관련이 있다. 최신의 입력 자료를 이용한 예측 데이터의 고속 생산은 신속한 대처를 가능하게 한다. 또한 알고리즘 작성, 계산, 결과 평가, 알고리즘 개선으로 이어지는 순환 구조를 원활하게 할 뿐만 아니라 오류 발생시 빠른 시간 내에 복구할 수 있게 하는 등 매우 중요한 요소이다. 현재의 조기경보 시스템은 매 계산 주기 마다 섬진강 유역의 10개 시군에 대해 30미터 해상도의 격자형 자료를 400개 이상 생성하고 있으며(중간 데이터 포함) 최대 9일까지 예보되는 자료를 포함할 경우 600개 이상이다. 이는 전국을 30미터 해상도로 약 45개를 생성하는 계산양과 비슷하다. 또한 14,000여개의 필지에 대한 구역 통계와, 각 래스터의 평균, 최대, 최소 등의 통계자료 생성도 함께 수행 해야 한다. 이와 같은 대량의 데이터를 한정된 시간 내로 처리하기 위한 몇 가지 기법을 적용하여 적용하였으며, 아직 적용은 못하였으나 가능성의 여부를 평가해 보는 것으로 본 연구를 진행하였다. 그 결과 앞서 제시된 래스터 캐시, NFS 캐시, 분산 처리를 모두 적용할 경우 데이터 처리 시간을 1/8로 단축 시킬 수 있음이 확인되었다. 또한 GPU를 이용한 연산을 적용할 경우 일부 모듈에 대해 매우 큰 폭으로 수행 시간을 단축 시킬 수 있음을 확인하였다. 다만 캐시를 위한 추가적인 디스크, GPU라는 별도의 하드웨어, 추가된 하드웨어 지원을 위한 고출력 전원 장치와 이에 따른 UPS (Uninterruptible power supply, 무정전 전원공급 장치)까지 상대적으로 높은 사양으로 준비해야 하는 비용적인 문제가 발생할 수 있다. 본 연구에서 제시한 네 가지 기법 중 세 가지는 계산 서버 추가를 통한 수평적 성능 확장에 관한 것이다. 하지만 서버의 추가가 처리 속도 향상으로 이어지지 않음은 물론 오히려 저하시키는 경우가 있다. 본 연구에서는 특정 시간 내로 작업을 완료 시키지 못하면 해당 작업을 반환하여 다른 서버가 처리하는 간단한 방식을 이용한다. 하지만 이런 문제를 지속적으로 발생시키는 계산 서버가 발견된다면 정해진 기준에 따라 계산 작업에서 완전히 퇴출 시켜야 성능 향상에 도움이 된다. 따라서 처리 속도에 대한 정확한 원인을 검사하고 이를 실시간으로 반영할 수 있는 기법이 필요하다.

Pencil Beam 알고리즘 기반의 상용 치료계획 시스템을 이용한 전자선 회전 치료 계획의 구현 및 정확도 평가 (Implementation and Evaluation of the Electron Arc Plan on a Commercial Treatment Planning System with a Pencil Beam Algorithm)

  • 강세권;박소아;황태진;정광호;이미연;김경주;오도훈;배훈식
    • 한국의학물리학회지:의학물리
    • /
    • 제21권3호
    • /
    • pp.304-310
    • /
    • 2010
  • 현재 이용되고 있는 상용 치료 계획시스템은 대부분의 치료용 선형가속기가 제공하는 전자선 회전 방식의 치료 기능을 제공하지 않고 있으며, 이것은 전자선 회전 치료가 널리 이용되지 못하는 한 가지 원인이 되기도 한다. 본 연구에서는 Varian 21-EX에 대해, pencil beam 기반의 Pinnacle3 (ver. 7.4f)를 이용한 전자선 회전 치료를 위한 커미셔닝을 한 후, 치료 계획을 세웠으며, 그 정확도를 평가해 보았다. 회전 빔은 폭이 일정한 조사빔을 규칙적으로 반복해서 구현하였으며, 필름과 점 선량을 측정하였다. 치료계획 시스템의 모델링 단계에서, 측정된 깊이 선량분포는 모델링의 계산과 1% 내에서 일치하였으나, 가로 선량분포의 경우에는 모델링 계산이 측정보다 작아서, 50% 선량값을 기준으로 할 때, 6 MeV는 distance-to-agreement (DTA) 값이 5.1 mm, 12 MeV의 경우에는 6.7 mm이었다. 인체모형 팬텀을 대상으로한 점 선량 및 필름 측정의 경우, 계산과 측정은 10% 이상의 차이를 보였다. Pencil beam 기반의 전자선 회전 치료 계획은 정량적인 기준으로 삼기에는 부족해서 선량 분포에 대한 정성적인 참고에만 머물러야 하며, 환자 치료 전에 측정을 통해 선량 확인이 필요하다.

구조적 공백과 협업필터링을 이용한 추천시스템 (Recommender Systems using Structural Hole and Collaborative Filtering)

  • 김민건;김경재
    • 지능정보연구
    • /
    • 제20권4호
    • /
    • pp.107-120
    • /
    • 2014
  • 본 연구에서는 사회연결망분석기법 중 하나인 구조적 공백 분석 결과를 이용하여 추천과정에 사용자의 정성적이고 감성적인 정보를 반영할 수 있는 협업필터링 기반의 추천시스템을 제안한다. 협업필터링은 추천기술 중 가장 많이 활용되고 있지만 전통적으로 확장성과 희박성 등의 문제점뿐 만 아니라 사용자-상품 매트릭스의 선호도만을 이용하여 추천을 함으로써 사용자의 정성적이고 감성적인 정보를 추천과정에 반영하지 못한다는 한계점이 있다. 본 연구에서 제안하는 추천시스템은 사회연결망분석에서 중심성 분석과 함께 연결망 내의 주요개체를 탐지할 수 있는 구조적 공백 분석을 이용하여 연결망 내의 대표 사용자들을 추출한 후 이들을 중심으로 군집을 형성한 후 각 군집색인 협업필터링을 수행하는 과정을 통해 전통적인 협업필터링에서 반영하지 못했던 정성적, 감성적 정보를 반영한다. 한편, 군집색인 협업필터링을 수행함으로써 추천의 효율성을 높일 수 있는 장점도 있다. 본 연구에서는 실제 사용자들의 상품에 대한 선호도 평가점수와 사용자들의 사회연결망 정보를 수집하여 실험을 수행하고 전통적인 협업필터링과 다양한 형태의 협업필터링과의 추천성과 비교를 통하여 제안하는 시스템의 유용성을 확인한다. 비교모형으로는 전통적인 협업필터링, 임의 군집색인 기반 협업필터링, k평균 군집색인 기반 협업필터링을 이용한 추천시스템이며, 실험 결과, 제안한 모형이 다른 비교모형에 비해 추천성과의 정확도가 가장 우수하였다. 추천성과의 차이에 대한 통계적 유의성 검정 결과, 제안 모형은 전통적인 협업필터링 기반의 추천시스템과는 통계적으로 유의한 성과 차이가 없었으나, 다른 두 모형에 대해서는 통계적으로 유의한 성과의 차이가 있는 것으로 나타났다.

옵티컬 플로우 방법으로 계산된 초기 바람 추정치에 따른 대기운동벡터 알고리즘 개선 연구 (Improvements for Atmospheric Motion Vectors Algorithm Using First Guess by Optical Flow Method)

  • 오유림;박형민;김재환;김소명
    • 대한원격탐사학회지
    • /
    • 제36권5_1호
    • /
    • pp.763-774
    • /
    • 2020
  • 수치예보모델의 예측 바람장은 대기운동벡터 알고리즘의 표적 추적 과정에서 추적 정확도 향상이나 계산 시간 단축을 위해 초기 추정치로 사용된다. 대기운동벡터는 수치예보모델의 자료동화 시 활용가치가 높다고 알려졌으나, 초기 추정치로 사용된 수치예보모델 바람장이 대기운동벡터의 검증 과정에 참 값으로 사용된다는 모순이 있다. 이를 해결하기 위해서는 수치예보모델로부터 독립적인 초기 추정치가 필요하다. 본 연구에서는 Lucas and Kanade 옵티컬 플로우 방법을 적용하여 바람장을 도출한 후 이를 초기 추정치로 사용함으로써 표적 추적과정에서의 모델 의존성을 제거하고 계산 속도를 향상시키고자 하였다. 대기운동벡터 산출에는 2015년 8월 18일 ~ 9월 5일 00, 06, 12, 18시 동안의 정지궤도 위성 Himawari-8/AHI의 14번 채널 Level 1B 자료를 사용하였다. 옵티컬 플로우 방법이 대기운동벡터 산출에 미치는 영향을 평가하기 위하여 다음과 같은 세가지 방법으로 교차 검증을 수행 하였다. (1) 초기 추정치 없이, (2) KMA/UM 예보바람장을 초기 추정치로 사용하여, 그리고 (3) 옵티컬 플로우 방법으로 계산된 바람장을 초기 추정치로 사용하여 대기운동벡터를 산출하고 ECMWF ERA-Interim 재분석장과 비교 검증한 결과, 옵티컬 플로우 기반 바람장을 초기 추정치로 사용한 경우에 가장 높은 정밀도를 보였다(RMSVD: 5.296-5.804 ms-1). 계산 속도는 초기 추정치를 사용하지 않은 경우에 가장 느렸고, 나머지 테스트는 유사한 속도를 보였다. 그러므로 대기운동벡터 알고리즘의 표적 추적 과정에 옵티컬 플로우 방법을 적용하면, 모델 의존성 없는 고품질 바람벡터의 산출이 가능할 것으로 사료된다.

N-13 암모니아 PET 동적영상과 인자분석을 이용한 심근 혈류량 정량화 (Quantification of Myocardial Blood flow using Dynamic N-13 Ammonia PET and factor Analysis)

  • 최용;김준영;임기천;김종호;우상근;이경한;김상은;최연성;김병태
    • 대한핵의학회지
    • /
    • 제33권3호
    • /
    • pp.316-326
    • /
    • 1999
  • 목적: N-13 암모니아 PET 동적영상에 포함된 순수 한 혈액풀 입력함수와 심근 조직함수를 추출하며 각 조직 인자영상을 생성하는 인자분석 방법을 개발하고자 하였다. 또한 인자분석 방법으로 추출된 입력함수와 조직함수를 사용하여 혈류량을 측정하여 구현한 인자분석 방법의 정확도와 유용성을 고찰하였다. 대상 및 방법: 다섯 명의 관상동맥질환 환자에 20 mCi N-13 암모니아를 안정상태와 부하상태에서 주사한 후, 23분간 26프레임의 PET 동적영상을 얻었다. 인자분석을 수행하기 위해 첫째, N-13 암모니아 PET 동적영상을 3차원 행렬화 한 후, 부분영상을 추출하여 딕셀을 생성, 규격화하였다. 두 번째 주 대각성분분석 단계에서는 공분산행렬을 계산하여 인자부하량을 구하며, 세 번째 단계에서는 인자부하량이 양의 구속조건을 만족할 때까지 인자함수를 사갈 회전시켰다. 네 번째 단계에서는 인자영상과 시간-방사능 곡선을 추출하였다. 인자분석 방법의 효율성과 정확성을 검증하고자 인자분석과 관심영역설정 방법으로 구한 혈액풀 입력함수의 곡선 아래 면적을 비교하고, 두 가지 방법으로 구한 입력함수와 조직함수를 이용하여 심근 혈류량을 측정하여 선형 회귀분석하였다. 결과: 관심영역 설정 방법과 개발된 인자분석 방법을 이용하여 구한 혈액풀 입력함수의 $0{\sim}1$분 사이의 평균 곡선 아래 면적 비는 1.02, $0{\sim}2$분 사이는 0.98, $1{\sim}2$분 사이는 0.86이었다. 또한 인자분석과 관심영역 설정 방법으로 얻은 입력함수와 관심영역 설정 방법으로 얻은 조직함수로 구한 심근 혈류량의 선형 회귀곡선 기울기는 0.91, 상관계수는 0.82로 서로 잘 일치하였다. 결론: N-13 암모니아 PET 동적영상을 인자분석 하는 방법을 구현하여 각 조직 인자영상과 이에 대응하는 시간-방사능 곡선을 추출하였으며, 인자분석과 관심영역 설정 방법으로 얻은 혈액풀 입력함수가 서로 잘 일치됨을 검증하였다. 또한, 인자분석 방법과 관심영역 설정방법으로 얻은 시간-방사능 곡선으로 구한 심근 혈류량 값들이 서로 좋은 상관관계를 나타내는 것으로 관찰되어 인자분석 방법으로 추출된 혈액풀 입력함수와 심근 조직함수가 순수한 생리적 함수들과 잘 일치된다고 판단할 수 있었다. 그러므로 N-13 암모니아 PET과 인자분석 방법을 이용하면 혈액 채취, 관심영역 설정, 흘러넘침 보정없이 심근 혈류량을 비침습적으로 간단하고 정확하게 정량화 할 수 있다.

  • PDF