• Advances in Computational Design
• /
• 제6권1호
• /
• pp.31-42
• /
• 2021

This research aims to demonstrate the optimal geometrical design of splayed multiple cross-sectional pin fin heat sinks (SMCSPFHS), which are a type of side-inlet-side-outlet heat sink (SISOHS). The optimiser strength Pareto evolutionary algorithm2 (SPEA2)is employed to explore a set of Pareto optimalsolutions. Objective functions are the fan pumping power and junction temperature. Function evaluations can be accomplished using computational fluid dynamics(CFD) analysis. Design variablesinclude pin cross-sectional areas, the number of fins, fin pitch, thickness of heatsink base, inlet air speed, fin heights, and fin orientations with respect to the base. Design constraints are defined in such a way as to make a heat sink usable and easy to manufacture. The optimum results obtained from SPEA2 are compared with the straight pin fin design results obtained from hybrid population-based incremental learning and differential evolution (PBIL-DE), SPEA2, and an unrestricted population size evolutionary multiobjective optimisation algorithm (UPSEMOA). The results indicate that the splayed pin-fin design using SPEA2 issuperiorto those reported in the literature.

• International Journal of Internet, Broadcasting and Communication
• /
• 제7권2호
• /
• pp.161-167
• /
• 2015

The performance of high power LEDs highly depends on the junction temperature. Operating at high junction temperature causes elevation of the overall thermal resistance which causes degradation of light intensity and lifetime. Thus, appropriate thermal management is critical for LED packaging. The main goal of this research is to improve thermal resistance by optimizing and comparing nano-pore silicon-based thermal substrate to insulated metal substrate and direct bonded copper thermal substrate. The thermal resistance of the packages are evaluated using computation fluid dynamic approach for 1 W single chip LED module.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2002년도 춘계학술대회논문집
• /
• pp.89-94
• /
• 2002

A commercial CFD code is used to calculate the 3-D viscous flow field within the centrifugal pump impeller. Design conditions are changed by impeller inlet(9.3mm, 12.2mm) and outlet breadth(6.65mm, 6.85mm). Numerical calculation was performed by changing flow rate from 8 to 26m$^{3}$/hr. Computation results shows that total head is increased at the larger inlet and outlet breadth than the others. And when the flow rate is increasing, the total head was decreased. The maximum efficiency of pump is shown at the design flow rate(16m$^{3}$/hr). In this study shows that the calculated results are good agreements with analysis results of design condition.

• EDISON SW 활용 경진대회 논문집
• /
• 제3회(2014년)
• /
• pp.631-636
• /
• 2014

본 연구는 전산 유체 해석 프로그램인 EDISON_CFD 해석 결과 산출 된 정적공기력계수(양력계수, 항력계수)를 이용하여 교량 단면의 갤로핑(Galloping)에 대한 안정성 평가를 실시하는데 그 목적이 있다. 특히 해상 교량은 장대 교량인데다 높은 풍속까지 견뎌 내야 하므로 내풍 안정성 검토의 중요성이 부각되고 있다. 전산 해석에 사용된 교량은 이순신 대교와 거가 대교의 표준 단면을 사용하였으며, 받음각과 풍속의 변화를 주어 높은 레이놀즈수 영역에서 공기력계수의 변화에 대해 검토하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.730-734
• /
• 2001

In this study in order to confirm the algorithms that are suggested from paper (I) as the experimental result, as the applied results of the hydraulic servo system are very strong a non-linearity of the fluid in the computer simulation, the real-time adaptive learning control algorithms is validated. The evolutionary strategy has characteristics that are automatically. adjusted in search regions with natural competition among many individuals. The error that is generated from the dynamic system is applied to the mutation equation. Competitive individuals are reduced with automatic adjustments of the search region in accord with the error. In this paper, the individual parents and offspring can be reduced in order to apply evolutionary algorithms in real-time as the description of the paper (I). The possibility of a new approaching algorithm that is suggested from the computer simulation of the paper (I) would be proved as the verification of a real-time test and the consideration its influence from the actual experiment.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.425-426
• /
• 2002

Lineal and angular movements of many engine components make the lubricant absorb air and the aerated lubricant greatly influences the clearance performance of contacting behaviors of engine components such as big-end bearing, cam and tappet, etc. This study investigates the behaviors of aerated lubricant in the gap between con-rod bearing and proceeding which is one of the most frictional energy consuming components in the engine. Our assumption for the analysis of aerated lubricant film is that the film formation is influenced by the two major factors. One is the density characteristics of the lubricant due to the volume change of lubricant by absorbing the bubbles and the other is the viscosity characteristics of the lubricant due to the surface tension of the bubble in the lubricant. In our investigation, it is found that these two major factors surprisingly increase the load capacity in certain ranges of bubble sizes and densities. Frictional forces are also influenced by the aerated bubble size and density, which eventually enlarge the shear resistance due the surface tension, Modified Reynolds' equation is developed for the computation of fluid film pressure with the effects of aeration ratio under the dynamic loading condition. From the calculated load capacity by solving modified Reynolds' equation, proceeding locus is computed with Mobility method at each time step.

• 드라이브 ㆍ 컨트롤
• /
• 제13권4호
• /
• pp.23-30
• /
• 2016

This paper presents a control-oriented dynamical model of a towing rope system with variable-length. In this system, a winch driven by a motor's torque uses the towing rope to pull a cart. In general, it is a difficult and complicated process to obtain an accurate mathematical model for this system. In particular, if the rope length is varied by operating the winch, the varying rope dynamics needs to be considered, and the key physical parameters need to be re-identified... However, real time parameter identification requires long computation time for the control scheme, and hence undesirable control performance. Therefore, in this article, the rope is modeled as a straight massless segment, with the mass of rope being considered partly with that of the cart, and partly as halfway to the winch. In addition, the changing spring constant and damping constant of the towing rope are accounted for as part of the dynamics of the winch. Finally, a reduced-order observer-based servomechanism controller is designed for the system, and the performance is evaluated by computer simulation.

• 대한토목학회논문집
• /
• 제33권2호
• /
• pp.739-748
• /
• 2013

본 연구에서는 고속도로 주행차량에 의해 인공적으로 발생하는 유도풍 해석을 CFD(Computation Fluid Dynamics)를 활용하여 수행하였다. 차량의 주행은 단독주행과 양방향으로 교행하는 경우에 대하여 해석을 하였으며, 차량의 공기역학적 특성보다는 중앙분리대 상부에 형성되는 유도풍에 집중하여 해석을 수행하였다. 주행차량의 유도풍 해석 결과 주행속도 50km/h인 경우 유도풍의 크기는 최대 2.2m/s, 90km/h는 4.0m/s, 120km/h는 5.3m/s인 것으로 검토되었으며, 차량주행속도 120km/h(33.3m/s)에 비해 약 2.0m 이격된 중앙분리대 상부 1.0m에서는 5.3m/s로 약 84%의 약화된 유도풍이 작용하였다. 차량의 유도풍은 차량이 통과하는 아주 짧은 시간만 유지되었다. 본 연구에서 주행차량의 유도풍 크기 분석을 통해 소형풍력기를 이용한 풍력발전이 가능할 것으로 판단되었다.

• 한국지진공학회논문집
• /
• 제22권5호
• /
• pp.261-269
• /
• 2018

This study examines earthquake-induced sloshing effects on liquid storage tanks using computation fluid dynamics. To achieve this goal, this study selects an existing square steel tank tested by Seismic Simulation Test Center at Pusan National University as a case study. The model validation was firstly performed through the comparison of shaking table test data and simulated results for the water tank subjected to a harmonic excitation. For a realistic estimation of the wall pressure response of the water tank, three recorded earthquakes with similar peak ground acceleration are applied:1940 El Centro earthquake, 2016 Gyeongju earthquake, and 2017 Pohang earthquake. Wall pressures monitored during the dynamic analyses are examined and compared for different earthquake motions and monitoring points, using power spectrum density. Finally, the maximum dynamic pressure for three earthquakes is compared with the design pressure calculated from a seismic design code. Results indicated that the maximum pressure from the El Centro earthquake exceeds the design pressure although its peak ground acceleration is less than 0.4 g, which is the design acceleration. On the other hand, the maximum pressure due to two Korean earthquakes does not reach the design pressure. Thus, engineers should not consider only the peak ground acceleration when determining the design pressure of water tanks.

• 한국해안해양공학회지
• /
• 제3권4호
• /
• pp.244-254
• /
• 1991

본 연구에서는 심해용 Guyed Toewer 계류선의 해저면과의 경계조건을 고려한 동적해석 방법을 제시하였다. 가상일의 원리와 유한요소법을 사용하여 기본식을 유도하였으며 케이블의 기하학적 비선형성을 고려하였다. 지점운동에 대한 정적 및 동적효과를 고려하기 위하여 모든 시스템매트릭스를 자유도에 관계되는 성분 및 지점운동과 관계되는 성분으로 분할하여 운동방정식을 유도하였다. 유체의 항력과 관성력은 Morrison식을 사용하였으며 비선형운동방정식의 해는 Newton-Raphson 방법과 New-mark-$\beta$방법을 사용하여 구하였다. 그 결과 Tower 운동에 의한 계류선의 거동을 용이하게 해석할 수 있었다. 수치해석예를 통하여 본 연구에서의 해석방법의 타당성을 입증하였으며, 본 해석방법은 케이블구조의 동적해석에 여러모로 적용할 수 있다.