• Journal of Advanced Marine Engineering and Technology
• /
• 제24권1호
• /
• pp.49-58
• /
• 2000

Thermal spraying is one of the most common surface coating techniques to be used for many applications and flame spraying covers a wide range of different materials which can be coated onto various substrates. The purpose of this study is to investigate the effects of mixed ratio in composite coatings on the mechanical and anti-corrosion properties. The five different types of composite coatings were made with $Al_2O_3$ ceramic and Ni-alloy powder on the mild steel substrate by flame spraying method. The mechanical properties such as microhardness, adhesive strength and erosion resistance and corrosion resistance were tested for the sprayed coating specimens. The results obtained are summarized as follows; 1. The composite coating layers greatly improve the microstructure, erosion resistance and adhesive strength by increasing the content of Ni-Al alloy. 2. Microhardness of the compsite coating layer is decreased by increasing the content of Ni-Al alloy. 3. The anti-corrosion properties is considerably improved by increasing the compsite rate of Ni-Al alloy.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2009년도 춘계학술대회
• /
• pp.423-427
• /
• 2009

This study proposes the generation mechanism of various design matrix using generalized linear model for design of experiment. Design generation method of GLM analysis, factorial design(FD) with center points, ANOVA design with lack-of-fit test, and response surface design are introduced. In central composite(CC) design, orthogonal blocking and fractional factorial design(FFD) are presented. We compare the design of Box-Benhken(BB) and face-centred central compsite design.

• 한국통신학회논문지
• /
• 제22권9호
• /
• pp.1949-1956
• /
• 1997

Closed form 해석 방법을 이용하여 복합기판상에 비대칭 결합 마이크로스트립 선로의 모드 파라미터를 구하였다. 단층기판과 복합기판상에 대칭 및 비대칭 결합 마이크로스트립 선로을 이용하여 방향성 결합기를 실현시켰다. 중심주파수 1.8GHz에서 10dB 방향성 결합기를 제작하여 측정한 결과, 복합기판을 갖는 결합기는 단층기판을 이용한 결합기보다 결합도와 방향성도가 개선되었다. 또한 비대칭 결합 마이크로스트립 선로를 이용한 결합기의 대역폭이 대칭 결합 마이크로스트립 선로를 이용한 결합기보다 대역폭이 넓다는 것을 확인하였다.

• 멤브레인
• /
• 제12권1호
• /
• pp.28-40
• /
• 2002

본 연구는 복합 박막 활성층의전기적/분자 구조적인 특성이 오염성에 어떤 영향을 미치는가를 조사하였다. 복합 박막 형태의 폴리아미드계 역삼투 분리막에 대한 오염 거동 현상을 이해하는데 있어 표면 구조와 표면 전하의 연구는 매우 효과적이다. AFM 전자현미경을 이용한 표면 구조 분석과 EKA 전위차 측정기를 통한 표면 전하의 분석 결과는 역삼투 분리막의 오염에 영향을 미치는 중요한 인자를 보여주고 있다. 복합막의 활성층이 중성에 가까울수록, 조도 차가 작을수록 역삼투막의 유량 감소 속도는 줄어든다.

• 대한치과보철학회지
• /
• 제33권3호
• /
• pp.397-412
• /
• 1995

The purpose of this study was to analyze the stress distribution in the dentin and post structures by the various post core materials and the amount of remaining coronal tooth structures. The 2-dimensional finite element models of mandibular 2nd premolars was divided into seven types according to the various amount of remaining coronal tooth structures. All types were modeled using equal length, diameter and shape of the post. 2 types of post and core materials were used : 1) cast gold post and core 2) stainless steel post and compsite resin core 10 Newton force was applied as follows 1) vertical force on occlusal fossa 2) $45^{\circ}$ oblique force on buccal surface of buccal cusp tip The results were as follows : 1. There was no apparent difference in the pattern of stress distribution according to the amount of remaining coronal tooth structure. 2. There was no apparent difference in the pattern of stress distribution within the dentin according to the post and core materials. A cast gold post and core generated lower dentin stress than a stainless steel post and resin core. 3. Max. dentinal stress resulting from vertical force was observed in the lingual side of dentin around the crown margin.This stress resulting from oblique force was observed in the lingual root surface of alveolar bone crest level.

• 대한기계학회논문집
• /
• 제18권6호
• /
• pp.1388-1398
• /
• 1994

The fracture toughness and micro-fracture mechanisms of the porous glass and stainless fiber reinforced glass composite were evaluated by using the acoustice mission(AE) technique, fracture toughness $test(K_{IC})$ and the macroscopic observation of the specimen surface which was being under the loading. At initial portion of the loading, the AE signals with low energy, of which origins were considered as the micro-cracks formated at the crack tip, were emitted. With increasing the applied load, AE signals having higher energies were generated due to the coalesence of micro-cracks and fast fracture. Based on the such relationship between AE emission and loading condition, fracture toughness $K_{IAE}$ could be defined successfully be using the $K_I$ value corresponding to an abrupt change of the accumulated AE signal energies emitted during the fracture toughness test. In spite of its brittleness of glass material, nonlinear deformation behavior before maximum load was observed due to the formation of micro-cracks. Further, the stainless fiber may have attributed to the improvement of fracture toughness and the resistance to crack propagation comparing to noncomposited materials Finally, models of the micro-fracture process combined with the AE sources for the porous glass material and its composite were proposed paying attention to the micro-crack nucleation and its coalescence at the crack tip. Fiber fracture and its Pullout, deformation of fiber itself were also delinated from the model.

• 공업화학
• /
• 제22권1호
• /
• pp.109-113
• /
• 2011

${\alpha},{\omega}$-Hydroxypropylpoly(dimethylsiloxane)은 ${\alpha},{\omega}$-hydrogenpolydimethylsiloxane을 allyl alcohol과 반응시켜 제조하였으며 이를 말레화 PE에 그라프트 시켜 MPE-g-PDMS 공중합체(MPES)를 제조하였다. MPES와 HDPE 및 4-ethoxybenzoic acid로 표면처리 된 MWCNT를 internal mixer에 가하고 $180^{\circ}C$에서 compounding하여 MPES/HDPE/EtO-CNT 복합체를 제조하였다. 열적특성을 측정한 결과 표면처리 된 CNT의 함량을 10에서 20 wt%로 증가시켜 제조한 MPES/CNT 복합체의 $T_m$은 132에서 $131^{\circ}C$로 약간 감소되었고 MPES/EtO-CNT 복합체의 경우 EtO-CNT의 함량을 10에서 20 wt%로 증가시킴에 따라 130에서 $129^{\circ}C$으로 약간 감소되었다. 또한 EtO-CNT를 사용하여 제조한 복합체의 경우 $120^{\circ}C$에서 전기저항이 급격하게 증가되어 PTC 현상이 나타났으며 또한 EtO-CNT의 함량을 10 wt%로 하여 제조한 복합체의 PTC intensity가 1.9로 가장 높게 나타났다.