• 대한기계학회논문집
• /
• 제17권7호
• /
• pp.1851-1863
• /
• 1993

A procedure for the prediction of the off-design performance of a gas turbine engine is proposed. The system performance at off-design speed is predicted by coupling the thermodynamic models of a compressor and a turbine. The off-design performance of a compressor is obtained using the stage-stackimg method, while the Ainlay-Mathieson method is used for a turbine. The procedure is applied to a single-shaft gas turbine and its predictability is found satisfactory. The results also show that the net work output increases with the increase of the turbine inlet temperature, while the thermal efficiency is marginal. The maximum thermal efficiency at design point is obtained between the highest pressure ratio and design pressure ratio.

• 한국군사과학기술학회지
• /
• 제6권3호
• /
• pp.103-110
• /
• 2003

The present work was conducted to achieve the better understanding of the performance analysis technique for the expander type air turbo ramjet engine. For this purpose, the performance analysis was carried out using a small engine(8.0kN thrust) with two types of fuels. From this analysis, at the same input condition, the thrust of methane-fueled engine was 25% lower than that of hydrogen. In addition, the case of methane shows the inapplicable engine performance cycle.(i.e., The compressor work exceeds the turbine output power) These results come mainly from the different heating value of each fuel and specific heat. This analysis also shows that, to build a same performance cycle as the hydrogen case, the methane-fueled engine requires increased air and fuel flow rates, increased turbine expansion ratio, and decreased compressor pressure ratio.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제17권4호
• /
• pp.141-148
• /
• 2009

Afterfogging of the regenerative gas turbine system has an advantage over inlet fogging in that the high outlet temperature of air compressor makes the injection of more water and the recuperation of more exhaust heat possible. This study investigates the effects of turbine inlet temperature (TIT) on the performance of regenerative gas turbine system with afterfogging through a thermodynamic analysis model. For the standard ambient conditions and the water injection ratios up to 5%, the variation of system performance including the thermal efficiency is numerically analyzed with respect to the variations of TIT and pressure ratio. It is also analyzed how the maximum thermal efficiency, net specific work, and pressure ratio itself change with TIT at the peak points of thermal efficiency curve. All of these are found to increase almost linearly with the increases of both TIT and water injection ratio.

• 연구논문집
• /
• 통권27호
• /
• pp.87-99
• /
• 1997

Present paper describes on/off design performance of a 50KW turbogenerator gas turbine engine for hybrid vehicle application. For optimum design point selection, relevant parameter study is carried out. The turbogenerator gas turbine engine for a hybrid vehicle is expected to be designed for maximum fuel economy, ultra low emissions, and very low cost. Compressor, combustor, turbine, and permanent-magnet generator will be mounted on a single high speed (82,000 rpm) shaft that will be supported on air bearings. As the generator is built into the shaft, gearbox and other moving parts become unnecessary and thus will increase the system's reliability and reduce the manufacturing cost. The engine has a radial compressor and turbine with design point pressure ratio of 4.0. This pressure ratio was set based on calculation of specific fuel consumption and specific power variation with pressure ratio. For the given turbine inlet temperature, a rather conservative value of $1100^\circK$ was selected. Designed mass flow rate was 0.5 kg/sec. Parametric study of the cycle indicates that specific work and efficiency increase at a given pressure ratio and turbine inlet temperature. Off design analysis shows that the gas turbine system reaches self operating condition at N/$N_{DP}$ = 0.53. Bleeding air for turbine stator cooling is omitted considering low TIT and for a simple geometric structure. Various engine performance simulations including, ambient temperature influence, surging at part load condition. Transient analysis were performed to secure the optimum engine operating characteristics. Surge margin throughout the performance analysis were maintained to be over 80% approximately. Validation of present results are yet to be seen as the performance tests are scheduled by the end of 1998 for comparison.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권5호
• /
• pp.76-85
• /
• 2000

Stirling cycle was actualized as so called ‘hot air engine’. It has been focused again lately as one of measures for exhaust gas emission problem, but as small power engine because of its method of heat addition. Recently marine power plants commenced to meet a stringent environmental restrictions by international convention, Marpol so that diesel engines as main and auxiliarly power plants are urged to be reformed to reduce NOx emission. Author devised a compression ignition engine as a large marine power plants combined with turbo charger based on stirling cycle, and analyzed the performance by means of basic thermodynamic calculation. Analyzed in this paper, were theoretical efficiency, mean effective pressure, required equivalence ratio, gas turbine power ratio, maximum pressure, states of turbo-charger inlet gas and exhaust gas, manifesting that the engine could be proposed as one of the future power plants of marine use.

• 플랜트 저널
• /
• 제10권3호
• /
• pp.39-44
• /
• 2014

국내 S복합발전본부의 150 MW급 가스터빈 축류압축기(18단)에서 저압단(1~9단)을 교체하여 압축기의 압력비를 기존 13.5에서 증가시킬 때 가스터빈 열효율을 예측하였다. 압력비 13.5일 때의 운전자료로 구한 압축기 단열효율과 터빈 단열효율을 적용하여 압력비 14.2에서 터빈일이 최대가 되는 압력비인 18.2까지 압력비를 1씩 증가하면서 열효율을 예측하였다. 압력비 증가 시 이론 열효율은 각 압력비에 대하여 각각 36.95%에서 38.6%까지 예측되었다. 압축기 저압단 교체 후 압력비가 16.2으로 증가되었을 때 실시한 성능시험 결과 열효율은 35.11%였다. 압력비 16.2일 때의 이론 열효율 37.87%와 비교하여 7.86% 범위에서 일치하였다. 압축기 교체 전 압력비 13.5일 때의 운전자료로 구한 압축기 단열효율과 터빈 단열효율을 이용하여 압력비 증가 시의 열효율을 성능시험 열효율의 7.86%내에서 예측할 수 있다.

• 연구논문집
• /
• 통권26호
• /
• pp.43-50
• /
• 1996

Present paper describes on/off design performance analysis of an 74KW industrial turboshaft gasturbine engine. Procedures to match between the compressor, combustor and turbine have been incorporated into the developed program satisfying compatibility requirement of flow and work and ratational speed. The validity of the performance results from the developed program are yet to be proved through performance experiments of the resultant engine, but comparison of the present results with those from "GASCAN(Thermoflow:America) under similar mass inlet flow, pressure ratio, and speed condition show good agreement despite present results underpredict 6-10% for power and up to 3% in efficiency, respectively.

• 한국추진공학회지
• /
• 제11권3호
• /
• pp.20-28
• /
• 2007

압축기의 써지 현상을 관찰하는 가장 쉬운 방법의 하나로는 부분품의 성능특성도상에 정적 그리고 동적 운용 특성을 나타내는 것이 될 수 있다. 이 경우 엔진의 작동범위가 써지 범위에 의하여 제한될 것이고 따라서 엔진은 엔진의 정적 또는 과도 성능의 전 과정에 걸쳐 일정한 써지 한계를 갖도록 요구되고 있다. 로터의 극관성 모멘트, 닥트 내 공기/가스의 용적 그리고 열전달 효과 등은 엔진의 작동이 정적 특성으로부터 일탈하게 되는 주요 요소들이다. 시스템 내에서 열교환기가 존재하는 경우처럼 큰 용적의 경우 그것은 동적 작동 특성에 상당한 영향을 주게 될 것인데 본 논문에서는 보조동력기관으로 사용되는 마이크로터빈의 예를 들어 엔진의 과도성능 특성에 압축기의 출구에서 추출되는 냉각공기가 미치는 영향을 조사코자 하였다. 질량 및 일 그리고 회전수 일치 법칙에 근거하여 터빈을 흐르는 가스 유량, 압력비, 회전 속도, 동력 그리고 모멘트가 계산되었다. 본 연구의 결과는 제어시스템 설계를 위한 기초 자료로 활용될 수 있을 것이다. 이러한 과도 성능을 계산하기 위한 프로그램을 개발을 위해서 상업용 MathCAD 소프트웨어를 사용하였다.