• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.299-303
• /
• 2005

본 연구에서는 축척방법에 의한 구성품 성능선도의 부정확성을 개선하기 위해 실험을 통하여 획득한 데이터를 유전자 알고리즘(Genetic Algorithms)으로 압축기 성능전도를 생성하는 방법을 제안하였고, 유전자 알고리즘만 이용할 경우 압축기 성능선도 생성시 서지점들과 쵸크점들을 예측하는데 불분명한 단점이 있어 기존의 구성품 성능선도 생성에 널리 사용하는 스케일링 기법을 보완적으로 이용하여 보다 정확한 구성품 성능선도의 예측을 시도하였다.

• Tribology and Lubricants
• /
• 제27권2호
• /
• pp.88-94
• /
• 2011

The tribological characteristics of the swash plate surface of a compressor which is for automobile were investigated. For surface treatments, PTFE and $MoS_2$ are used as a solid lubricant, together with copper alloy. Test condition is set considering actual driving condition. Wear testing is conducted using pin on disk type tester, and the coefficient of friction and the temperature on friction surface are measured. Also, to determine the wear patterns, cross-section of friction surface is analyzed by SEM(scanning electrode microscope). The $MoS_2$, both at dry and lubricated conditions, friction surface and the coefficient of friction maintained rather stable results. But, the PTFE, at oil less condition, sample resulted in rather unstable condition. In case of copper alloy, quite higher friction coefficients(higher than 0.1) were obtained at dry condition. At the temperature of $125^{\circ}C$, seizure has occurred.

• 대한기계학회논문집A
• /
• 제24권10호
• /
• pp.2428-2437
• /
• 2000

In general, it is known that the portion of leakage loss is more than 20 % of total loss in scroll compressor. So far many studies have been done to improve the leakage problem and volumetric efficiency. In order to do this it is necessary that the leakage is exactly evaluated for conventional scroll model. Almost all studies that have been done were assumed that the clearance remains constant while operating. But in actual operating conditions, scroll wrap is deformed due to elevated refrigerant gas temperature. And this makes the leakage clearance change, so the leakage mass flow and the volumetric efficiency are also changed. In this study we assumed the steady state operating condition and obtain the average temperature and convection heat transfer coefficient in terms of involute angle. With these results, using finite element method we analyzed the heat transfer of scroll wrap, then did thermal deformation analysis. Then we obtain the leakage clearance and do the leakage and volumetric efficiency analysis. Compared with undeformed feature, we examine the effect of the thermal deformation on the leakage. The results say that the leakage mass flow for the case of considering thermal deformation is less than that for the unconsidered one, and this means that the leakage clearance is reduced due to thermal deformation.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제10권4호
• /
• pp.220-228
• /
• 2002

The cool-down performance after soaking is very important in an automotive air-conditioning system and is considered as a key design variable. Therefore, transient characteristics of each system component are essential to the preliminary design as well as steady-state performance. The objective of this study is to develop a computer simulation model and ostinato theoretically the transient performance of an automotive air-conditioning system. To do that, the mathematical modelling of each component, such as compressor, condenser, receiver/drier, expansion valve, and evaporator, is presented first of all. The basic balance equations about mass and energy are used in modelling. For detailed calculation, condenser and evaporator are divided into many sub-sections. Each sub-section is an elemental volume for modelling. In models of expansion valve and compressor, dynamic behaviors are not considered in this analysis, but the quasisteady state ones are just considered, such as the relation between mass flow rate and pressure drop in expansion device, polytropic process in compressor, etc. Also it is assumed that there are no heat loss and no pressure drop in discharge, liquid, and suction lines. The developed simulation model is validated by comparing with the laboratory test data of an automotive air-conditioning system. The overall time-tracing properties of each component agreed well with those of test data in this case.

• 설비공학논문집
• /
• 제13권11호
• /
• pp.1089-1096
• /
• 2001

The cool-down performance after soaking is very important in an automotive air-conditioning system and is considered as the key design variable. Therefore, understanding of the overall transient characteristics of the system is essential to the preliminary design as well as steady-state characteristics. The objective of this study is to develop a computer simulation model and estimate theoretical1y the transient performance of an automotive air-conditioning system. To accomplish this, a mathematical modelling of each component, such as compressor, condenser, expansion valve, and evaporator, is presented first of all. For a detailed calculation, condenser and evaporator are divided into many subsections. Each sub-section is an elemental volume for modelling. In models of expansion valve and compressor, dynamic behaviors are not considered in an attempt to simplify the ana1ysis, but the quasi-static ones are just considered, such as the relation between mass flow rate and pressure drop in expansion device, polytropic process in compressor, etc. The developed simulation model is validated with a comparison to laboratory test data of an automotive air-conditioning system. The overall time-tracing properties of each component agreed fairly well wish those of test data in this case.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1999년도 유체기계 연구개발 발표회 논문집
• /
• pp.301-308
• /
• 1999

The present study investigates numerically particle laden flow through compressor cascades and a rocket nozzle. Engines are affected by various particles which are suspending in the atmosphere. Especially in the case of aircraft aviating in volcanic, industrial and desert region including many particles, each components of engine system are damaged severely. That damage modes are erosion of compressor blading and rotor path components, partial or total blockage of cooling passage and engine control system degradation. Numerical prediction and experimental data, erosion rates are predicted for two materials - ceramic, soft metal - on compressor blade surface. Aluminum oxide ($Al_2O_3$) Particles included in solid rocket propelant make ablative the rocket motor nozzle and imped the expansion processes of propulsion. By the definition of particle deposition efficiency, characteristics of particles impaction are considered quantitatively Stoke number is defined over the various particle sizes and particle trajectories are treated by Lagrangian approach. Particle stability is considered by definition of Weber number in rocket nozzle and particle breakup and evaporation is simulated in a rocket nozzle.

• 한국추진공학회지
• /
• 제23권3호
• /
• pp.104-111
• /
• 2019

압축기와 팽창기로 구성된 새로운 개념의 로터리엔진이 개발 중에 있다. 초기 프로토타입을 제작하고 작동성 확인을 위한 모터링, 압축기 압력 및 연료 연소시험을 수행하였다. 본 논문은 이 새로운 엔진에 적합하게 개발된 사이클 해석 방법에 대한 것이다. 본 엔진 고유의 작동 메커니즘에 대한 분석과 공기의 열역학적 해석을 공기 흡입, 압축, 연소실 진입, 연소, 팽창 그리고 배기에 이르는 각 과정에서 수행하였다. 본 논문에서 제시된 해석 방법으로 압축기와 팽창기 사이의 압축공기 냉각효과는 물론 엔진의 여러 설계 변수가 엔진 성능에 주는 영향을 파악할 수 있으며 이 논문에 몇 가지 경우에 대한 계산 결과를 기술하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.465-466
• /
• 2009

• 대한기계학회논문집B
• /
• 제39권4호
• /
• pp.293-299
• /
• 2015

여러 산업분야에서 다양한 원심압축기가 사용되고 있다. 따라서 사용자의 요구에 맞는 원심압축기의 설계가 복잡해졌고, 최적화된 설계점을 찾는 것은 더욱 어려워졌다. 전통적으로 효율은 최적화의 중요한 요소이다. 본 연구에서는 효율 외에도 압축기의 무게를 고려하여 설계하였다. 본 연구의 목적은 압축기의 효율과 무게를 고려할 때에 그 고려하는 가중치의 변화에 따라 설계의 경향성이 나타남을 확인하는 것에 있다. 또한, 이를 바탕으로 초기 설계 단계에서 객관적인 설계점을 선택할 수 있음을 보여주는데 있다. 본 연구에서는 베인이 없는 디퓨저를 한정하여 연구하였다. 최적화를 위해서 크리깅을 사용하였고, 1차원 설계 프로그램의 표본을 적절히 이용하였다. 설계공간을 적절히 가정하였고, 설계공간 내에서 최적설계점을 계산하였다.

• 대한기계학회논문집B
• /
• 제29권8호
• /
• pp.948-955
• /
• 2005

A three-dimensional computation was conducted to understand effects of the inlet boundary layer thickness on the internal flow in a low-speed axial compressor operating at the design condition($\phi=85\%$) and near stall condition($\phi=65\%$). At the design condition, the flows in the axial compressor show, independent of the inlet boundary layer thickness, similar characteristics such as the pressure distribution, size of the hub comer-stall, tip leakage flow trajectory, limiting streamlines on the blade suction surface, etc. However, as the load is increased, the hub corner-stall grows to make a large separation region at the junction of the hub and suction surface for the inlet condition with thick boundary layers at the hub and casing. Moreover, the tip leakage flow is more vortical than that observed in case of the thin inlet boundary layer and has the critical point where the trajectory of the tip leakage flow is abruptly turned into the downstream. For the inlet condition with thin boundary layers, the hub corner-stall is diminished so it is indistinguishable from the wake. The tip leakage flow leans to the leading edge more than at the design condition but has no critical point. In addition to these, the severe reverse flow, induced by both boundary layer on the blade surface and the tip leakage flow, can be found to act as the blockage of flows near the casing, resulting in heavy loss.