• Journal of Advanced Marine Engineering and Technology
• /
• 제27권1호
• /
• pp.82-90
• /
• 2003

Nowadays, many components used in machinery industry is required lightness and high strength. The shot-peening method is used in order to improve the fatigue life of spring steel(JIS G SUP-9) which is used in suspension of automobile. The compressive residual is induced in this shot-peening process. This paper investigated the effect of the residual compressive stress on the fatigue crack growth characteristics. Main results are summarized as follows. 1. The fatigue crack growth rate on stage II is conspicuous with the level of compressive residual stress and is dependent on Paris equation. 2. Although the maximum compressive residual stress is deeply and widely formed from surface, it does not improve the fatigue life comparing when maximum compressive residual stress is formed in surface. 3. The threshold stress intensity factor range is increased with increasing compressive residual stress. 4. In fracture surface of fatigue crack growth it is investigated that compressive residual stress remarkably retards fatigue crack growth.

• 한국생산제조학회지
• /
• 제25권4호
• /
• pp.253-257
• /
• 2016

The effects of re-peening on the compressive residual stress and fatigue life of Al7075-T6 were investigated. The compressive residual stress induced on the surface of components by shot peening is known to increase the fatigue life. However, the fatigue load relaxes the compressive residual stress of components. Re-peening is a technique to again induce the relaxed compressive residual stress and increase the total fatigue life of components. In this study, the re-peening process was applied to fatigue-loaded specimens. The compressive residual stress and fatigue life were examined for re-peened specimens with fatigue ratios of 30%, 50%, and 70%. The results showed that the compressive residual stress of the specimens was relaxed under the fatigue load. The re-peening process significantly increases the compressive residual stress and total fatigue life.

• Journal of Rhinology
• /
• 제59권1호
• /
• pp.49-58
• /
• 2021

Background: Nasal polyps in the nasal cavity and mucous discharge inside the maxillary sinus exhibit compressive stress on the nasal mucosal epithelium. However, there have been only a few studies on how compressive stress impacts the human nasal mucosal epithelium. Methodology: We investigated the effect of compressive stress on collective migration, junctional proteins, transepithelial electrical resistance, epithelial permeability, and gene expression in well-differentiated normal human nasal epithelial (NHNE) cells and human nasal polyp epithelial (HNPE) cells. Results: NHNE cells barely showed collective migration at compressive stress up to 150 mmH₂0. However, HNPE cells showed much greater degree of collective migration at a lower compressive stress of 100 mmH₂0. The cell migration of HNPE cells subjected to 100 mmH₂O compression was significantly decreased at day 3 and was recovered to the status prior to the compressive stress by day 7, indicating that HNPE cells are relatively more sensitive to mechanical pressure than NHNE cells. Compressive stress also increased transepithelial electrical resistance and decreased epithelial permeability, indicating that the compressive stress disturbed the structural organization rather than physical interactions between cells. In addition, we found that compressive stress induced gene expressions relevant to airway inflammation and tissue remodelling in HNPE cells. Conclusion: Taken together, these findings demonstrate that compressive stress on nasal polyp epithelium is capable of inducing collective migration and induce increased expression of genes related to airway inflammation, innate immunity, and polyp remodelling, even in the absence of inflammatory mediators.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.348-352
• /
• 2004

Recently the steel parts used for automiles and trains are required to be used under higher stress than ever before in need of the weight down. However, threr are a lot of problems with developing such of fatigue strength and fatigue life are mainly focused on by adopting residual stress. And got the following characteristics from crack growth test carried out stress ratio. Fatigue life shows more improvement in the Un-peening material. And Compressive residual stress of surface on the Shot-peening processed operate resistance force of fatigue. So we cam obtain fallowings. (1) The fatigue crack growth rate on stage II is conspicuous with the size of compressive residual stress and is dependent of Paris equation. (2) Although the maximum compressive residual stress is deeply and widely formed from surface, fatigue life does not improve than when maximum compressive residual stress is formed in surface. (3) The threshold stress intensity factor range is increased with increasing compressive residual stress.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 춘계학술대회 논문집
• /
• pp.281-287
• /
• 2002

Nowadays, many components used in machinery industry is required lightness and high strength. Therefore, the effects of compressive residual stress by shot-peening which is method to improve fatigue lift of spring steel (JISG SUP-9), which used in suspension of automobile, on fatigue crack growth characteristics was investigated with considering fracture mechanics. So, we can obtain followings 1. The fatigue crack growth rate on stage II is conspicuous with the size of compressive residual stress and is dependent on Paris equation. 2. Although the maximum compressive residual stress is deeply and widely formed from surface, fatigue life does not improve than when maximum compressive residual stress is formed in surface. 3. The threshold stress intensity factor range is increased with increasing compressive residual stress. 4. In fracture surface of fatigue crack growth it is investigated that compressive residual stress remarkably retards fatigue crack growth.

• 한국생산제조학회지
• /
• 제7권5호
• /
• pp.120-126
• /
• 1998

Second step shot peening was applied on both smooth specimen and U-notch specimen in order to investigate the stress distribution and the improvement in fatigue strength. Various experiments and measurements such as rotary bending fatigue test and the measurement of compressive residual stress were performed. The results showed that the fatigue strength of second step shot peened specimens increased by 34 percent compared to that of unpeened ones. Compressive residual stress also considerably increased, which resulted in the increase of fatigue strength. finite element analysis showed that shot peening is effective in decreasing the bending stress by external force. The effectiveness of shot peening in reducing the compressive residual stress was anticipated by the superposition of the concentrated stress and the compressive residual stress.

• 한국자동차공학회논문집
• /
• 제11권4호
• /
• pp.117-124
• /
• 2003

The lightness of components required in automobile and machinery industry is requiring high strength of components. In particular, manufacturing process and new materials development for solving the fatigue fracture problem attendant upon high strength of suspension of automobile are actively advanced. In this paper, the effect of compressive residual stress of spring steel(JISG SUP-9) by shot-peening on fatigue crack growth characteristics in high temperatures($100^{\circ}C$, $150^{\circ}C$, $180^{\circ}C$) was investigated with considering fracture mechanics. So, we can obtain followings. (1)Compressive residual stress decreases in high temperature, that is, with increasing temperature. (2)The effect of compressive residual stress on fatigue crack growth behavior in high temperature increases below $\Delta$K=17~19MPa (3)It was investigated by SEM that the constraint of compressive residual stress for plastic zone of fatigue crack tip was decreased in high temperature as compared with room temperature.

• Journal of Welding and Joining
• /
• 제5권1호
• /
• pp.42-56
• /
• 1987

Fatigue Fracture behaviors of the TIG-welded aluminum alloys, such as Al 2024-T4, A1 5050-0 and Al 7075-T7 were investigated when a crack propagated from tensile residual stress region and compressive residual stress region. The experimental values were compared with the values expected by the Forman equation. The experimental results are summarized as the following: (1) In case of fatigue crack propagation from residual stress region, the values predicted by Forman equation were Found to exactly corresponded to the experimental values. (2) When the stress intensityfactors affected by compressive residual stress, Kres, were greater than the stress intensity factors by minimum applied stresses. Kmin, the Forman equation was found to be improper to be applied directly, but the equation appeared to be proper, if the stress ratio was modified to zero. (3) The experimental results confirmed that residual stress was relaxed by repeated tensile loading and the relaxing trend was greater in case of compressive residual stress than that of tensile residual stress.

• 대한치과교정학회지
• /
• 제32권5호
• /
• pp.343-353
• /
• 2002

제1소구치 발치를 동반한 설측교정치료시 lingual K-loop archwire로 전치부 후방견인을 시 행한 경우 전치부 및 구치부에서 치조골에 발생하는 초기응력을 알아보기 위하여, K-loop의 vortical leg 길이는 15mm로 하고 편측당 350gm의 힘으로 활성화시 킨 후 상악궁 광탄성 모형의 응력동결을 시행하고 각 치아별로 절단하여 3차원 광탄성법으로 분석한 바 다음과 같은 결론을 얻었다. 1. 중절치의 근심면은 치관측일수록 더 큰 인장응력을 보였으며 원심면은 치관측일수록 더 큰 압축응력을 보였다. 순면에서는 치관측일수록 더 큰 인장응력을 보였으며 설면에서는 치근측일수록 더 큰 압축응력을 보였다 치근첨에서는 압축응력이 나타났다. 2. 측절치의 근심면에서는 치관측만 인장응력이 관찰되었고 원심면에서는 고른 압축응력을 보였다. 순면에서는 치관측일수록 더 큰 인장응력이 관찰되었고 설면에서는 치관측에서는 인장응력을, 치근측에서는 압축응력을 보였다. 치근첨에서는 압축응력이 관찰되었다. 3. 견치의 근심면은 치관측에서는 인장응력을, 치근측에서는 압축응력을 보였고 원심면은 인장응력을 보였다. 순면과 설면은 치관측일수록 큰 인장응력을 보였다. 순면보다 설면에서 더 큰 인장응력을 보였다. 치근첨에서는 압축응력이 관찰되었다. 4. 제2소구치는 근심면은 인장응력을 보이며 원심면은 치관측에서는 압축응력을, 치근측에서는 인장응력을 보였다. 협면은 치관측에서 압축응력을 보였으며, 설면은 치관측일수록 더 큰 인장응력이 관찰되었다. 치근첨에서는 인장응력을 보였다. 5. 제1대구치는 근원심면 모두에서 치관측일수록 더 큰 인장응력을 보였다. 협면에서는 응력이 나타나지 않았고, 설면은 치관측일수록 더 큰 인장응력이 관찰되었다. 협측치근들의 치근첨에서는 압축응력을, 구개측치근의 치근첨에서는 무응력을 보였다. 6. 제2대구치는 모든 치근의 치근첨에서 압축응력이 관찰되었다. 근심면은 치관측일수록 더 큰 압축응력을, 원심면은 치관측일수록 더 큰 인장응력을 보였다 협면은 치관측일수록 더 큰 인장응력을, 설면은 치관측일수록 더 큰 압축응력을 나타내었다. 따라서 전치부 후방견인시 transverse bowing effect는 뚜렷이 나타났으나, vertical bowing effect는 나타나지 않고 오히려 전치부가 함입되려는 응력이 발생하였다.

• Geomechanics and Engineering
• /
• 제14권2호
• /
• pp.203-209
• /
• 2018

Reliable estimation of compressive as well as tensile in-situ stresses is critical in the design and analysis of underground structures and openings in rocks. Kaiser effect technique, which uses acoustic emission from rock specimens under cyclic load, is well established for the estimation of in-situ compressive stresses. This paper investigates the Kaiser effect on marble specimens under cyclic uniaxial compressive as well as cyclic uniaxial tensile conditions. The tensile behavior was studied by means of Brazilian tests. Each specimen was tested by applying the load in four loading cycles having magnitudes of 40%, 60%, 80% and 100% of the peak stress. The experimental results confirm the presence of Kaiser effect in marble specimens under both compressive and tensile loading conditions. Kaiser effect was found to be more dominant in the first two loading cycles and started disappearing as the applied stress approached the peak stress, where felicity effect became dominant instead. This behavior was observed to be consistent under both compressive and tensile loading conditions and can be applied for the estimation of in-situ rock stresses as a function of peak rock stress. At a micromechanical level, Kaiser effect is evident when the pre-existing stress is smaller than the crack damage stress and ambiguous when pre-existing stress exceeds the crack damage stress. Upon reaching the crack damage stress, the cracks begin to propagate and coalesce in an unstable manner. Hence acoustic emission observations through Kaiser effect analysis can help to estimate the crack damage stresses reliably thereby improving the efficiency of design parameters.