• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.301-306
• /
• 1999

Over 4.1 billion metric tons of non-hazardous solid wastes are generated in the United States anually. Therefore, there is a need to reuse or reprocess as many products or by -products as possible. In this report, the aggregates produced from Naval Shipyard and Charlexton area dredge spoils are designated as NC and DS, respectively. The major objective of this portion was to determine the feasibility of the use of these aggregates in concrete mixtures. According to test results, the unit weight of concrete mixtures containing NC and DS (vitrified glass) was lower than the control mixture, and the control mixture produced higher compressive and bending strength compared to mixtures containing vitrified glass. However the mixtures containing vitrified glass still could be used in the field based on the minimum criteria set for the mix desgin.

• 한국농공학회지
• /
• 제41권6호
• /
• pp.90-96
• /
• 1999

Over 4.1 billion metric tons of non-hazardous solid wstes are generated in the United States annually. Therefore, there is a need to reuse or reprocess as many products or by-products as possible. In this report, theaggregates produced from Naval Shipyard and Charleston area dredge spoils are designated as GP-21-23 and GP 4-5, repectively. The major objective of this study is to determine the feasiblity of the use of these aggregates in concrete. The followings are some of the conclusions, observations and recommendations regarding this portion of the research project. In most cases, the unit weight of concrete containing GP 21-23 and GP 4-5 (vitrified galss) lower than the control concrete, and the concrete containing vitrified glass produced lower compressive and bending strength compared to the control. However the concrete containing virtrified glass could be used in the field based on the minimum criterial set for the mix design. The use of vitrified glass in concrete is recommended in several applications except parking lots, side walks and main roads, because abrasion resistace is not high.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1992년도 봄 학술발표회 논문집
• /
• pp.35-40
• /
• 1992

Results of an experimental study on the manufacture, the workability and mechanical properties of steel fiber reinforced polyester resin composites utilizing industrial waste products are presented in this paper. The fly ash polyester resin composites using steel fiber, fly ash and calcium carbonic acid (CaCo3), unsaturated polyester resin, styrene monomer, cobalt octate and methyl ethyl ketone peroxide, fine and coarse aggregates are prepared with various filler~binder rations, binder rates and mixing conditions. As a test results, the workability of steel fiber reinforced polyester resin composites are considerably dropped with increasing fly ash-binder ratio and steel fiber volume. And compressive, flexural strength and bending toughness of the composites are remarkably improved with augmenting fiber contents.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.115-116
• /
• 2011

This study aimed at establishing the fundamental data needed to evaluate the applicability and practicability in using a bamboo activated carbon as a construction material. The experiment on the flow of mortars mixed with a bamboo activated carbon before the hardening was carried out for the evaluation of basic properties. The compressive and bending strength of mortar mixed with bamboo activated carbon after the hardening was measured. the thermal conduction rate and density were also measured. An comparative analysis on mortars mixed with pine charcoals was conducted to compare it with exiting materials.

• Advances in concrete construction
• /
• 제8권3호
• /
• pp.187-198
• /
• 2019

Torsional behaviors of beams are investigated for the web reinforcement and the concrete type. Eight beams with self-compacting concrete (SCC) and twelve beams with conventional concrete (CC) were manufactured and tested. All the models manufactured as the $250{\times}300{\times}1500mm$ were tested according to relevant standards. Two concrete types, CC and SCC were designed for 20 and 40 MPa compressive strength. From the point of web reinforcement, the web spacing was chosen as 80 and 100 mm. The rotation angles of the concrete beams subjected to pure torsional moment as well as the cracks occurring in the beams, the ultimate and critical torsional moments were observed. Moreover, the ultimate torsional moments obtained experimentally were compared with the values evaluated theoretically according to some relevant standards and theories. The closest estimations were observed for the skew-bending theory and the Australian Standard.

• 대한토목학회논문집
• /
• 제32권5C호
• /
• pp.221-229
• /
• 2012

NATM터널의 안정성 확보를 위해 지반조건이 불량한 경우 숏크리트에 격자지보나 H형강 등의 강지보를 보강하는 경우가 많다. 그러나 설계 시 강지보를 숏크리트가 경화되기 전 임시지보재로 간주하여 수치해석 시 고려하지 않는 것이 일반적이며, 수치해석에 고려하더라도 모델링 방법이 다양하다. 본 연구에서는 휨강도실험, 압축강도실험, 그리고 실대형실험을 통하여 강지보와 숏크리트 합성부재의 거동과 하중 부담률을 분석하였다. 또한 실험과 같은 조건에서 숏크리트와 강지보의 고려방법을 달리하여 수치해석을 실시하여 실험결과와 비교분석하였다. 연구결과 숏크리트와 강지보는 경계면에서의 미끄러짐(slip)으로 인하여 일체로 거동하지 않으며, 수치해석 시 휨모멘트는 강지보가 모두 부담하고 축력은 숏크리트와 강지보가 압축강성비에 따라 분담하는 것으로 고려하는 것이 적절한 것으로 평가되었다.

• 열처리공학회지
• /
• 제9권1호
• /
• pp.69-77
• /
• 1996

The fatigue crack initiation behavior of plasma ion nitrided SACM645 steel was investigated through the rotary bending fatigue test and residual stress measurement by XRD. It was shown by XRD and EPMA that the plasma ion nitrided surface was composed of ${\gamma}^{\prime}(Fe_4N)$phase and ${\varepsilon}(Fe_{2-3}N)$phase, and that the nitrogen atoms existed in Fe matrix in diffusion layer. The OM, SEM and Auger spectroscopy showed that the depth of compound layer, mixed compound and diffusion layer, and diffusion layer was $8{\mu}m$, $30{\mu}m$ and $300{\mu}m$, respectively. However, the microhardness test showed that the depth of hardened layer was $500{\mu}m$. The tensile strength of the ion nitrided SACM645 was lower than that of the unnitrided SACM645, and the ion nitrided specimen was fractured without plastic deformation. The nitrided SACM645 showed much poorer low cycle fatigue properties than the unnitrided one. In rotary bending fatigue, the fatigue strength of the ion nitrided SACM645 was higher than that of the unnitrided specimen, and the fatigue crack initiation sites changed by applied fatigue stress levels. The XRD result showed that the ion nitrided SACM645 has the compressive residual stress from surface to $600{\mu}m$ deep and the tensile residual stress from $600{\mu}m$ to deeper site. It is thought that crack initiation takes place at the point where the total stress of residual stress and applied stress is maximum.

• 콘크리트학회논문집
• /
• 제17권2호
• /
• pp.255-261
• /
• 2005

본 연구에서는 매년 많은 양의 석탄회 발생으로 인한 환경오염을 줄이고 천연자원의 채취와 고갈로 인한 문제를 극복하기 위해, 산업 폐기물의 건설재료로서의 재활용 가능성을 확보하기 위한 기초적인 연구자료를 제시하였다. 압축강도실험을 통하여 재료에 대한 탄성계수값을 측정하였으며, 3점 휨파괴시험으로부터는 파괴에너지, 초기노치비, 노치민감도등을 평가함으로써 파괴역학적 파라메타를 제안하였다. 실험 결과, 초기강도는 콘크리트에 비해 낮으나 장기강도에서는 비슷함을 볼 수 있었다 하지만 파괴강도가 증가함에 따라 취성적인 경향을 보이면서 파괴에너지값은 낮음을 알 수 있었다. 또한 하중-변위곡선과 하중-균열개구변위곡선의 형태는 모두 비슷한 형태를 띠고 있었으며, 재령이 증가할수록, 노치비는 작을수록 최대하중값이 커지면서 파괴시의 처짐은 감소함을 알 수 있다. 하지만 파괴강도가 커지면서 취성적인 경향으로 최대하중이후의 연화구간의 기울기가 급해짐을 볼 수 있었다. 따라서 연성의 확보에 대한 추가적인 보완연구가 진행되어진다면 충분히 건설재료로 사용 가능할 것으로 판단되어진다.

• 한국항해항만학회지
• /
• 제31권5호
• /
• pp.435-445
• /
• 2007

선체는 기본적으로 얇은 판부재들의 조합으로 구성되어 있으며 이들 중 상당수는 유공을 가진 유공판(Perforated plate)으로 이루어져있다. 선체에 설치된 유공판으로서는 선체 상갑판 해치(하역시설로 사용), 선저부의 거더와 플로어(중량경감과 선박 건조 및 검사시 통로확보용), 다이어프램(중량경감 및 파이프 관통의 목적)등이 있다. 이들 유공판에 압축하중이 작용하면 좌굴과 최종강도 특성이 크게 변화할 뿐만 아니라 수반되는 면내응력도 재 분포하게 되어 심각한 문제를 발생한다. 본 연구에서는 실선에서 사용 중인 유공보강판의 모델을 조사하여 비선형 유한요소법(ANSYS)을 사용하여 종방향 압축하중이 작용하는 경우에 대해서 유공비, 웹 치수, 웹 두께 그리고 보강재 단면을 변화시켜가며, 최종강도 시리즈 해석을 수행하고, 최종강도 예측 설계식을 제안하였으며, 식의 정도성을 검증하기 위하여 유한요소해석 결과와 비교하여 정도를 확인하였다. 제안된 설계식은 초기구조설계 시 유공보강판의 최종강도 계산에 유용하게 사용되리라 판단된다.

• 한국농공학회지
• /
• 제38권5호
• /
• pp.95-105
• /
• 1996

This study was performed to evaluate the mechanical properties of permeable polymer concrete using fillers and unsaturated polyester resin. The following conclusions were drawn; 1. The unit weight was in the range of 1, 663~ l, 892kg/$cm^3$, the weights of those concrete were decreased 18~28% than that of the normal cement concrete. 2. The highest strength was achieved by fly ash filled permeable polymer concrete, it was increased 22% by compressive strength, 190% by tensile strength and 192% by bending strength than that of the normal cement concrete, respectively. 3. The external strength of permeable pipe was in the range of 3, 083~3, 793kg/m, the external strengths of those concrete were increased 2~26% than that of the normal cement concrete. Accordingly, these permeable polymer concrete pipe can be used to the members and structures which need external strength. 4. The static modulus of elasticity was in the range of $5.7{\times} 10^4 ~ 15.4{\times} 10{^4}kg/cm^2 $, which was approximately 35~64% of that of the normal cement concrete. Fly ash filled permeable polymer concrete was showed relatively higher elastic modulus. The poisson's number of permeable polymer concrete was less than that of the normal cement concrete. 5. The dynamic modulus of elasticity was in the range of $83{\times} 10^3 ~ 211{\times} 10{^3}kg/cm^2 $, which was approximately Ins compared to that of the normal cement concrete. Fly ash filled permeable polymer concrete was showed higher dynamic modulus. The dynamic modulus of elasticity were increased approximately 22~45% than that of the static modulus. 6. The ultrasonic pulse velocity was in the range of 2, 584 ~ 3, 587m/sec, . which was showed about the same compared to that of the normal cement concrete. Fly ash filled permeable polymer concrete was in the range of$0.58~8.88 {\ell}/cm^2/hr$, , and it was larglely dependent upon the mixing ratio. These concrete can be used to the structures which need water permeability.