• IEMEK Journal of Embedded Systems and Applications
• /
• v.11 no.4
• /
• pp.235-241
• /
• 2016

Compared to the former H.264 standard, the number of the prediction modes has highly increased in HEVC intra prediction. Compression efficiency and accurate prediction are significantly improved. However, the computational complexity increases as well. To solve this problem, this paper proposes the new scheme where not only prediction modes but also block partition candidate are early chosen. Compared to the original intra prediction in HEVC, the proposed scheme achieves about 38% reduction in processing cycles with a marginal loss in compression efficiency.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.23-25
• /
• 2007

The partial distortion elimination (PDE) scheme is used to decrease the sum of absolute difference (SAD) computational complexity, since the SAD calculation has been taken much potion of the video compression. In motion estimation (ME) based on PDE, it is ideal that the initial value of SAD in summing performance has large value. The traditional scan order methods have many operation time and high operational complexity because these adopted the division or multiplication. In this paper, we introduce the new scan order and search order by using only adder. We define the average value which is called to rough average value (RAVR). Which is to reduce the computational complexity and increase the operational speed and then we can obtain the improvement of SAD performance. And also this RAVR is used to decide the search order sequence, since the difference RAVR between the current block and candidate block is small then this candidate block has high probability to suitable candidate. Thus, our proposed algorithm combines above two main concepts and suffers the improving SAD performance and the easy hardware implementation methods.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.04a
• /
• pp.291-298
• /
• 2001

When the compression members have the variable cross sections along their member axes, the determination of the elastic critical loads by classical methods becomes impossible and if possible involves complicated calculation only to obtain the approximate values of critical load. In this paper the elastic critical load coefficients of the tapered members with simply supported ends were determined by finite element method. And then the results were represented by simple algebraic equations of two parameters, a( =taper parameter) and m ( = sectional property parameter). One the basis of algebraic equations, the equivalent moment of inertia concept originally proposed by Bleich for a spesific case, are extended to the general cases.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.39 no.1
• /
• pp.93-101
• /
• 1997

This paper presents yield surfaces and hardening laws for describing the state of an unsaturated soil under isotropic compression and suction changes. The yield surface is formulated within the framework of hardening plasticity using two independent sets of stress variables : the excess of total stress over air pressure and the suction. And the application of the yield surfaces and hardening laws are confirmed from the result of the experiment. To this end a series of suction-controlled isotropic tests are conducted on clayey soils. Matric suction is controlled by the axis translation technique using high air entry ceramic disk. The specimens are compacted using a half of Proctor compaction energy with 5 % lower of water content than the optimum moisture contents. From test results, existence of the yield surfaces and an application of hardening laws to samples are confirmed by comparison between test and predicted results. And it is confirmed that LC yield locus is extened with the total plastic deformations induced by suction or stress changes, however, SI yield locus is only extended with the plastic deformations by induced suction changes.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.6 no.2
• /
• pp.203-210
• /
• 2002

In these days, High-strength steel prevails throughout the construction fields for the benefit of structural and economical aspects. But high-strength steel is used by the simple calculation of flexural capacities for the purpose of reducing flexural reinforcement. So, this paper is mainly focused on the shear behavior of high-strength steel reinforced concrete beams without stirrups comparing with normal-strength steel reinforced concrete beams. Specimens were made and tested with the experimental parameters, such as steel yield strength, reinforcement ratios and minimum shear reinforcement. The main result was that not only area but also the yield strength of flexural reinforcement should be considered to predict the shear capacities of concrete beams. In addition, the experimental results were simulated by modified compression field theory analysis program, RESPONSE 2000. A good agreement was achieved between the test results and program analyses.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1181-1192
• /
• 2008

A laboratory investigation was carried out into effects of strain rate on undrained shear behavior of Holocene clay underneath Kobe Airport with an objective to evaluate the factor of safety of the retaining structure built on it. It was examined in a series of triaxial compression and extension tests performed using different rate of axial straining. A comparative compression test in which the strain rate was changed in steps was also carried out. Similar tests were performed in constant-volume direct shear box (DSB) test. And, the deformation characteristics of the clay were also examined in order to evaluate the variation of stiffness during undrained shearing. It was found that the undrained strength increased with not only the shear rate but also the consolidation period. ISOTACH properties seemed a key to govern the undrained shear behavior.

• Structural Engineering and Mechanics
• /
• v.21 no.6
• /
• pp.699-712
• /
• 2005

The response of a plate-column system having five-degree-of-freedom supported by an elastic foundation and subjected to static lateral load, harmonic ground motion and earthquake motion is studied. Two Winkler foundation models are assumed: a conventional model which supports compression and tension and a tensionless model which supports compression only. The governing equations of the problem are obtained, solved numerically and the results are presented in figures to demonstrate the behavior of the system for various values of the system parameters comparatively for the conventional and the tensionless Winkler foundation models.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.10
• /
• pp.2838-2844
• /
• 1999

The motion-based video segmentation provides a powerful method of video compression, because it defines a region with similar motion, and it makes video compression system to more efficiently describe motion video. In this paper, we propose the Modified Fuzzy Competitive Learning Algorithm (MFCLA) to improve the traditional K-menas clustering algorithm to implement the motion-based video segmentation efficiently. The segmented region is described with the affine model, which consists of only six parameters. This affine model was calculated with optical flow, describing the movements of pixels by frames. This method could be applied in the low bit rate video transmission, such as video conferencing system.

• Journal of the korean Society of Automotive Engineers
• /
• v.13 no.3
• /
• pp.49-57
• /
• 1991

Natural gas is one of the most promising alternative fuels for automative vehicles, because it has lower exhaust emissions and better fuel economy characteristics than gasoline and can be used in conventional engines with a little modification. In the present study, a conventional gasoline engine was modified to a CNG dedicated engine, which can be operated with CNG( compressed natural gas) only, and a engine bench test was performed at various compression ratios. As a result, it was revealed that the prototype CNG engine can be operated with lower exhaust emissions, better fuel economy and better thermal efficiency, but with a sightly reduced brake horse power, compared to the conventional gasoline engine.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.4
• /
• pp.1020-1026
• /
• 2016

Motion estimation (ME) algorithms supporting quarter-pixel accuracy have been recently introduced to retain detailed motion information for high quality of video in the state-of-the-art video compression standard of H.264/AVC. Conventional sub-pixel ME algorithms in the spatial domain are faced with a common problem of computational complexity because of embedded interpolation schemes. This paper proposes a low-complexity sub-pixel motion estimation algorithm in the transform domain utilizing shifting matrix. Simulations are performed to compare the performances of spatial-domain ME algorithms and transform-domain ME algorithms in terms of peak signal-to-noise ratio (PSNR) and the number of bits per frame. Simulation results confirm that the transform-domain approach not only improves the video quality and the compression efficiency, but also remarkably alleviates the computational complexity, compared to the spatial-domain approach.