• Journal of the Korean Society of Food Culture
• /
• v.3 no.3
• /
• pp.309-317
• /
• 1988

The effects of $CaCl_2$, K-sorbate, and fermented fish sauces and blanching on the texture of Chinese cabbage of Kimchi were evaluated. The addition of salt-fermented shrimp or salt-fermented anchovy accelerated the pH reduction, acidity increase and reducing sugar consumption, but K-sorbate, Ca-chloride and blanching suppressed the ripening process of Kimchi. The latter retarded the softening rate of Chinese cabbage during Kimchi fermentation, as demonstrated by the cutting force, compression force, recovered height and work ratio. The sensory evaluation confirmed the results of instrumental texture measurments. The instrumental measurements, i.e. pH, acidity cutting thickness, cutting force and compression test parameters, showed acidity acidity was calculated as % lactic acid attributes, i.e. the preferences for taste, appearance and texture, and the level of crispiness, hardness, chewiness and fibrousness. The pH of Kimchi was appeared to be an important quality parameter, whiih had significant correlations with the taste, appearance, chewiness, hardness, fibrousness and crispiness.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.223.1-223
• /
• 2003

인산 쌀 전분을 제조, 이용하기 위한 기초 자료를 얻기 위하여 추청벼와 삼강벼를 원료로 하여 쌀 전분을 제조하고 이에 15% sodium tripolyphosphate를 가하여 15$0^{\circ}C$에서 30분간 반응시켜 얻어진 인산 쌀 전분(D. S.=0.015)의 이화학적 성질을 검토하였다. 인산 쌀 전분의 투명도는 원료 전분에 비하여 높았으며 원료 전분은 6$0^{\circ}C$, 인산 쌀 전분은 5$0^{\circ}C$부터 증가하기 시작하였다. 인산 쌀 전분의 색도는 원료 전분에 비하여 명도가 감소하였으며, 적색도 및 황색도는 증가하였다. 이것은 초산 처리 쌀 전분보다는 색상에서 좋지 않게 평가되었다. 인산 처리한 추청벼 및 삼강벼 전분의 호화개시 온도는 각각 5$0^{\circ}C$, 53$^{\circ}C$로서 인산 처리에 의해 원료 쌀 전분보다 14~15$^{\circ}C$ 낮아졌으며, 인산 쌀전분의 점도는 원료 쌀 전분에 비하여 7.4~8.4배 증가하였고 추청벼 전분이 삼강벼 전분보다 높게 나타났다. 인산 쌀 전분 겔의 견고성, 응집성, 접착성, 탄력성, 점착성 및 씹힘성은 원료 전분 겔보다 높았으며 두 품종간에는 추청벼 전분이 다소 높았다. 인산 쌀 전분 입자의 표면 구조는 원료 쌀 전분에 비하여 다소 팽윤되어 헝클어진 형태를 나타냈다. 이상의 결과를 볼 때 인산 처리 쌀전분이 원료 쌀 전분보다 호하 개시 온도가 낮고, 점도가 높아 즉석면의 제조 시 호화 온도를 낮추고 쫄깃쫄깃한 촉감의 면을 만들 수 있음을 시사하고 있으며, 정이 보고한 초산 처리 쌀 전분과 이용성을 비교할 때 인산 처리 전분이 라면 제조에 있어 더 효과적일 것임이 예상된다.desirability(전체적으로 바람직한 정도)의 경우 효소처리시킨 시료중 pH6.5$\longrightarrow$3.5, 35$^{\circ}C$(T1)과 45$^{\circ}C$(T3)처리군이 28일간 수침시켜 제조한 유과와 비교될 만한 높은 점수를 보여 이를 처리군에서 바람직한 특성을 지닌 유과 제조가 가능한 것으로 나타났다.의 Softness 는 Compression force 및 Work ratio 와 유의적인 상관관계를 나타내었으며, Dryness 와 Crumblyness 는 Work ratio와 유의적인 상관관계를 나타내고 있어 백편의 조직감은 Compression force 와 Work ratio로 대치할 수 있을 것이라고 사료된다. 수분함량은 기계적 검사보다 관능검사와 더욱 높은 상관관계를 나타냈다.내었다. 항균활성이 우수한 생약재를 농도별로 활성을 조사한 결과, 물 추출물과 10% Ethanol 추출물 모두 낮은 농도에서도 우수한 항균활성을 나타내었다.취와 함께 점질성 갈변물질이 생성되었다. 이와 같은 결과로 볼 때, BAAG의 처리는 BAAC의 경우보다 가격은 저렴하면서도 항균력은 우수한 천연 항균복합제재로써 농산물 식품원료에 적용하여 선도유지 기간을 연장할 수 있는 효과를 기대할 수 있었다. 과일 등의 포장제로서 이용할 가능성을 확인하였다.로 [-wh] 겹의문사는 복수 의미를 지닐 수 없 다. 그러면 단수 의미는 어떻게 생성되는가\ulcorner 본 논문에서는 표면적 형태에도 불구하고 [-wh]의미의 겹의문사는 병렬적 관계의 합성어가 아니라 내부구조를 지니지 않은 단순한 단어(minimal $X^{0}$ elements)로 가정한다. 즉, [+wh] 의미의 겹의문사는 동일한 구성요

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.5
• /
• pp.256-261
• /
• 2012

Recently, many photovoltaic systems (PV systems) including solar parks and PV farms have been built to prepare for the post fossil fuel era. To investigate the degradation process of the PV systems and thus, efficiently operate PV systems, there is a need to visually monitor PV systems in the range of infrared ray through the Internet. For efficient visual monitoring, this paper explores a multithreaded implementation of a recently developed HEVC standard whose compression efficiency is almost two times higher than H.264. For an efficient parallel implementation under a meshbased 64 multicore system, this work takes into account various design choices which can solve potential problems of a two-dimensional interconnects-based 64 multicore system. These problems may have not occurred in a small-scale multicore system based on a simple bus network. Through extensive evaluation, this paper shows that, for an efficient multithreaded implementation of HEVC intra prediction in a mesh-based multicore system, much effort needs to be made to optimize communications among processing cores. Thus, this work provides three design choices regarding communications, i.e., main thread core location, cache home policy, and maximum coding unit size. These design choices are shown to improve the overall parallel performance of the HEVC intra prediction algorithm by up to 42%, achieving a 7 times higher speed-up.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.178-180
• /
• 2004

In this work, we propose new method of sigma filtering for efficient filtering and preserving edge regions in DCT Domain. In block-based image compression technique, the image is first divided into non-overlapping $8{\times}8$ blocks. Then, the two-dimensional DCT is computed for each $8{\times}8$ block. Once the DCT coefficients are obtained, they are quantized using a specific quantization table. Quantization of the DCT coefficients is a lossy process, and in this step, noise is added. In this work, we combine IDCT matrix and filter matrix to a new matrix to simplify filtering process to remove noise after IDCT in spatial domain, for each $8{\times}8$ DCT coefficient block, we determine whether this block is edge or homogeneous region. If this block is edge region, we divide this $8{\times}8$ block into four $4{\times}4$ sub-blocks, and do filtering process for sub-blocks which is homogeneous region. By this process, we can remove blocking artifacts efficiently preserving edge regions at the same time.

• Journal of Power System Engineering
• /
• v.14 no.2
• /
• pp.28-33
• /
• 2010

In this research, cascade liquefaction process was simulated using two-staged direct expansion with inter-cooler. Evaporated gaseous refrigerant which has low pressure and temperature from the inter-cooler is mixed with gaseous refrigerant from outlet of 1st compressor, and flows into 2nd compressor. Therefore this prevents superheating compression. Compressor work of process which includes inter-cooler to all cycles shows the lowest value of 338.68 MW and it is lower 16.34% than that of basic process. Refrigeration capacity shows decreasing tendency as applied inter-cooler and that of process which includes inter-cooler to all cycles shows the lowest value of 449 MW. COP was increased when the inter-cooler was applied, and process which includes inter-cooler to all cycles shows highest value of 1.33. It shows that COP was increased because decrement of compressor work by applying inter-cooler was higher than decrement of refrigeration capacity.

• Advances in concrete construction
• /
• v.6 no.1
• /
• pp.87-102
• /
• 2018

Utilization of waste tires may be considered as one of the solution to the problems faced by the local authorities in disposing them. Reclaimed rubber (RR) is being used in concrete for replacing conventional aggregates. This research work is focused on the strength prediction of reclaimed rubber concrete using a Genetic Algorithm (GA) for M40 grade of concrete and comparing it with experimental results. 1000 sets were taken and 100 iterations were run during training of GA models. A base study has been carried out in this research work partially replacing cement with three types of fillers such as Plaster of Paris (POP), Fly Ash (FA) and Silica Fume (SF). A total of 243 cubes were cast and tested for compression using a Universal Testing Machine. It was found that SF produced maximum strength in concrete and was used in the main study with reclaimed rubber. Tests were conducted on 81 cube samples with a combination of optimum SF percent and various proportions of RR replacing coarse aggregates in concrete mix. Compressive strength tests of concrete at 7, 14 and 28 days reveal that the maximum strength is obtained at 12 percent replacement of cement and 9 percent replacement of coarse aggregates respectively. Moreover the GA results were found to be in line with the experimental results obtained.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.5
• /
• pp.543-551
• /
• 2007

The performance characteristics of water-chilling heat pump using $CO_2$ with respect to variation of inlet temperature and mass flow rate of secondary fluid was investigated experimentally. An experimental apparatus is consisted of a compressor, a gas cooler, an expansion valve, an evaporator and a liquid receiver. All heat exchangers used in the test rig are counter-flow-type heat exchangers with concentric dual tubes, which ate made of copper. The gas cooler and the evaporator consist of 6 and 4 straight sections respectively arranged in parallel, each has 2.4 m length. The experimental results were summarized as the followings : As inlet temperature of secondary fluid in the gas cooler increases from $10^{\circ}C$ to $40^{\circ}C$, the compressor work, heating capacity and heating COP were varied to 37.8%, -13%, -35.9%, respectively. The heating capacity, compressor work, heating COP were turned into 23.3%, 6.42%, 13.1%, respectively when ass flow rate of secondary fluid in the evaporator increases from 70 g/s to 150 g/s. The above tendency is similar with performance variation with respect to temperature variation of secondary fluid in the conventional vapor compression cycle.

• Geomechanics and Engineering
• /
• v.9 no.6
• /
• pp.729-742
• /
• 2015

The aim of the present work was the study of instability in a loose sand from Les Dunes beach in Ain Beninan, Algeria, where the Boumerdes earthquake occurred in 2003. This earthquake caused significant structural damages and claimed the lives of many people. Damages caused to infrastructures were strongly related to phenomena of liquefaction. The study was based on the results of two drained and six undrained triaxial tests over a local sand collected in a region where liquefaction occurred. All the tests hereby analyzed followed compression stress-paths in monotonic conditions and the specimens were isotropically consolidated, since the objective was to study the instability due to static loading as part of a more general project, which also included cyclic studies. The instability was modeled with the second-order work increment criterion. The definition of the instability line for Les Dunes sand and its relation with yield surfaces allowed the identification of the region of potential instability and helped in the evaluation of the susceptibility of soils to liquefy under undrained conditions and its modeling. The dilatancy rate was studied in the points where instability began. Some mixed tests were also simulated, starting with drained conditions and then changing to undrained conditions at different time steps.

• Computers and Concrete
• /
• v.10 no.3
• /
• pp.307-330
• /
• 2012

This work intends to contribute for the improvement of the procedure suggested by Brazilian Technical Code that takes into account the cracked concrete stiffness in the estimative of the displacement of reinforced concrete beams submitted to service loads. A damage constitutive model accounting for induced anisotropy, plastic deformations and bimodular elastic response is used in order to simulate the concrete behaviour, while an elastoplastic behaviour is admitted for the reinforcement. The constitutive models were implemented in a program for bars structures analysis with layered finite elements. Initially, the damage model is briefly presented as well as the parametric identification of the materials that have been used in the reinforced concrete beams. After that, beams with different geometries and reinforcement area are analyzed and a statistical method (ANOVA) is employed in order to identify the main variables in the problem. Soon after, the same procedure is used with another resistance of concrete, where the compression strength is changed. The numerical responses are compared with the ones obtained by Brazilian Technical Code and experimental tests in order to validate the use of the damage model. Finally, some remarks are discussed based on responses presented in this work.

• Journal of the Korean Institute of Gas
• /
• v.17 no.5
• /
• pp.1-7
• /
• 2013

In this study, simulation work of HCNG refueling system was performed. The hydrogen was produced from steam reforming process by natural gas. The conversion of natural gas is increased as SCR is increased. but it was no significant difference more than 3 of SCR and fuel throughput is increased as GHSV is increased. Both conversion and fuel throughput levels was optimized when the $1700h^{-1}$ of GHSV. CNG was compressed from low pressure natural gas. For the mixing of $H_2$ and CNG is mixed with the high pressure conditions such as 400bar of $H_2$ and 250bar of natural gas. Single-stage compression was required more power than multi stage. So, multi stage compression was suggested for high pressure compression. We calculated the intermediate pressure to minimize total required power of compressors. The intermediate pressure for $H_2$ and natural gas were derived at 61 and 65 bar, respectively.