• 소성∙가공
• /
• 제31권2호
• /
• pp.64-72
• /
• 2022

Since aluminum alloys experience both tensile and compression deformation modes during forming process, it is important to understand the role of deformation mode on the hot formability of metallic alloys. In the present work, the hot formability of Al7050 alloy was investigated by conducting both tensile and Gleeble tests at various temperatures and strain rates. Processing maps representing low efficiency regions were observed at low temperature and high strain rate in both tensile and compressive deformation modes while the maximum efficiency regions depended on different deformation modes. Moreover, samples tested at stable processing conditions presented a smaller pore fraction than those at instable conditions that resulted in crack initiation during plastic deformation. This result shows that different deformation modes during plastic forming can affect formability changes of metallic alloys. Understanding of tension-compression behaviors will help us solve this problem.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.780-785
• /
• 2005

This paper aims to consider an overall benefit-duration optimization (OBDO) problem for the sake of maximizing owner's economic benefits, whilst considering influences of schedule compression incurred opportunity income on the profitability of a large-scale construction project. Unlike previous schedule optimization models and techniques that have focused on project duration or cost minimization, with greater weight on contractors' interests, OBDO facilitates owner's economic benefits through overall benefit-duration optimization. In this paper, the objective function of OBDO model is formulated. An example is illustrated to prove the feasibility and practicability of the overall benefit-duration optimization problem. The significance of employing OBDO model and future research work are also described.

• 한국자동차공학회논문집
• /
• 제9권6호
• /
• pp.94-102
• /
• 2001

The thermodynamic second law analysis, which means available energy or exergy analysis, for the indicated performance of Otto cycle engine has been carried out. Each operating process of the engine is simplified and modeled into the thermodynamic cycle. The calculation of the lost work and exergy through each process has been done with the thermodynamic relations and experimental data. The experimental data were measured from the test of single cylinder Otto cycle engine which operated at 2500 rpm, WOT(Wide Open Throttle) and MBT(Minimum advanced spark timing for Best Torque) condition with different fuels: gasoline, methanol and mixture of butane-methanol called M90. Experimental data such as cylinder pressure, air and fuel flow rate, exhaust gas temperature, inlet gas temperature and etc. were used for the analysis. The proposed model and procedure of the analysis are verified through the comparison of the work done in the study with experimental results. The calculated results show that the greatest lost work is generated during combustion process. And the lost work during expansion, exhaust, compression and induction process follows in order.

• 한국지반환경공학회 논문집
• /
• 제21권6호
• /
• pp.19-25
• /
• 2020

최근 도심지 공사에 있어서는 공간부족 및 주변환경의 영향으로 기성파일의 시공이 불가능한 경우가 많다. 이러한 경우에 소형 장비로 시공이 가능하고 기존 파일의 지지능력을 발휘할 수 있는 소구경 파일 공법이 많이 사용되고 있다. 소구경 파일공법은 현장타설말뚝의 한 종류로서 파일의 직경이 75mm~300mm인 정도로 주변 구조물이나 지반 그리고 공간적인 장애물이 있는 경우에도 시공의 어려움이 거의 없으며 모든 종류의 토질조건에서 시공이 가능하다. 또한 시공과정에서 진동과 소음이 적고 건물 천장이 낮은 곳에서도 시공이 가능하므로 기존 건물의 기초보강에도 많이 이용된다. 이러한 마이크로파일이 압축력이나 인장력을 받았을 때 혹은 시공된 지반특성에 따라 변화되는 거동 특성에 대해서는 연구가 많지 않은 실정이다. 따라서 이 연구에서는 현장에 시공된 마이크로파일에 대한 현장재하시험 자료 분석을 통하여 마이크로 파일에 압축력 및 인장력을 가했을 경우 지반을 구성하는 성분과 파일의 근입조건에 따른 침하 및 지지력 특성을 규명하고 통계분석프로그램인 SAS를 활용하여 마이크로파일의 침하와 지지력에 영향을 미치는 주요한 인자에 대한 분석을 수행하였다.

• 한국음향학회지
• /
• 제39권1호
• /
• pp.38-46
• /
• 2020

로파/데몬 그램은 수동소나의 특성을 확인하기 위해 수중 음향 신호에 대한 방위, 시간, 주파수를 시각적으로 표현한 결과이다. 이러한 그램들은 기존의 압축 기법들을 적용하기 힘든 토널 성분과 같은 특징들을 포함하고 있다. 본 논문에서는 이진맵과 예측 기법으로 구성된 새로운 로파 및 데몬 그램 압축 기법을 제안한다. 먼저 각 주파수 빈에 대한 예측을 결정하는 이진맵을 생성하고, 프레임을 몇 개의 매크로 블록으로 구분한다. 각 매크로 블록에 대해 인트라 예측과 인터 예측을 적용하여 나머지를 계산한다. 그리고 이진맵에서 유효한 빈들에 대해 예측을 수행하고 엔트로피 부호화를 위해 나머지를 양자화 한다. 이진맵과 예측모드를 전송함으로써 복호기는 동일한 절차로 그램을 복원한다. 시뮬레이션을 통해 제안하는 알고리즘의 로파와 데몬 그램 압축 결과가 기존의 데이터 압축 기법에 비해 우수함을 확인한다.

• 한국재료학회지
• /
• 제24권11호
• /
• pp.625-631
• /
• 2014

To investigate the deformation properties of TiC-(5-20) mol% Mo solid solution single crystals at high temperature by compression testing, single crystals of various compositions were grown by the radio frequency floating zone technique and were deformed by compression at temperature from 1250K to 2270K at strain rates from $5.1{\times}10^{-5}$ to $5.9{\times}10^{-3}/s$. The plastic flow property of solid solution single crystals was found to be clearly different among a three-temperature range (low, intermediate and high temperature ranges) whose boundaries were dependent on the strain rate. From the observed property, we conclude that the deformation in the low temperature range is controlled by the Peierls mechanism, in the intermediate temperature range by the dynamic strain aging and in the high temperature range by the solute atmosphere dragging mechanism. The work softening tends to become less evident with an increasing experimental temperature and with a decreasing strain rate. The temperature and strain rate dependence of the critical resolved shear stress is the strongest in the high temperature range. The curves are divided into three parts with different slopes by a transition temperature. The critical resolved shear stress (${\tau}_{0.2}$) at the high temperature range showed that Mo content dependence of ${\tau}_{0.2}$ with temperature and the dependence is very marked at lower temperature. In the higher temperature range, ${\tau}_{0.2}$ increases monotonously with an increasing Mo content.

• 한국강구조학회 논문집
• /
• 제18권5호
• /
• pp.597-606
• /
• 2006

섬유강화 플라스틱은 강재의 단점을 보완할 수 있는 다양한 장점을 가지고 있기 때문에 현재 건설구조재로 사용하기 위한 연구가 활발히 진행되고 있다. 본 연구는 펄트루젼 FRP를 구조압축재로 사용하기 위한 설계식의 개발에 관한 연구의 일부로서 설계강도에 가장 큰 영향을 미치는 요소 중 국부좌굴거동에 관한 연구이다. 직교이방성 판요소로 구성된 압축부재의 설계에서 국부좌굴의 발생 여부, 국부좌굴을 주도하는 판요소의 구별 등은 매우 중요한 설계요소이며, 이러한 거동을 정밀해법에 의해 계산하기란 매우 복잡하고 난해하다. 따라서, 본 연구에서는 펄트루젼 압축부재의 설계규준 개발을 위해 필요한 국부좌굴계수를 정밀해법, 에너지법, 매개변수 해석 등의 방법을 적용하여 정확하면서도 쉽게 직교이방성판의 좌굴계수와 펄트루젼 압축부재의 국부좌굴계수를 계산할 수 있는 근사식을 제안하였으며 제안된 근사식을 사용하여 펄트루젼 압축부재의 국부좌굴발생 여부 및 국부좌굴을 주도하는 판요소를 구별할 수 있는 방법을 제안하였다.

• 한국수소및신에너지학회논문집
• /
• 제12권3호
• /
• pp.169-176
• /
• 2001

The purpose of study is to obtain low-emission and high-efficiency in LPG engine with hydrogen enrichment. The test engine was named heavy-duty variable compression ratio single cylinder engine (VCSCE). The fuel supply system provides LPG/hydrogen mixtures based on same heating value. Various sensors such as crank shaft position sensor (CPS) and hall sensor supply spark timing data to ignition controller. Displacement of VCSCE is $1858.2cm^3$. VCSCE was runned 1400rpm with compression ratio 8. Spark timing was set MBT without knocking. Relative air-fuel ratio(${\lambda}$) of this work was varied between 0.76 and 1.5. As a result, i) Maximum thermal efficiency occurred at ${\lambda}$ value 1.0. It was shown that thermal efficiency was increased approximately 5% with hydrogen enrichment at same ${\lambda}$ value. ii) Engine-out carbon monoxide (CO) emissions were decreased at a great rate under LPG/hydrogen mixture fuelling. iii) Total hydrocarbon (THC) emission was much exhausted in rich zone, same as CO. But THC was exhausted a little bit more in lean zone. iv) Finally, engine-out oxides of nitrogen (NOx) was increased with ${\lambda}$ value 1.0 zone at a greater rate with hydrogen enrichment due to high adiabatic flame temperature.

• 한국자동차공학회논문집
• /
• 제12권6호
• /
• pp.111-118
• /
• 2004

The work presented in this paper concerns the aerodynamic characteristics and compression wave generated in a tunnel when a high speed train enters it. A large number of solutions have been proposed to reduce the amplitude of the pressure gradient in tunnels and some of the most efficient solutions consist of (a) addition ofa blind hood, (b) addition of inclined part at the entrance, and (c) holes in the ceiling of the tunnel. These are numerically studied by using the three-dimensional unsteady compressible Euler equation solver with ALE, CFD code, based on FEM method. Computational results showed that the smaller inclined angle leads to the lower pressure gradient of compression wave front. This study indicated that the most efficient slant angle is in the range from $30^{\circ}$ to $50^{\circ}$. The maximum pressure gradient is reduced by $26.81\%$ for the inclined angle of $30^{\circ}$ as compared to vertical entry. Results also showed that maximum pressure gradient can be reduced by $15.94\%$ in blind hood entry as compared to $30^{\circ}$ inclined tunnel entry. Furthermore, the present analysis showed that inclined slant angle has little effect on aerodynamic drag. Comparison of the pressure gradient between the inclined tunnel hood and the vertical entry with air vent holes indicated that the optimum inclined tunnel hood is much more effective way in reducing pressure gradient and increasing the pressure rise time.

• 영미문화
• /
• 제9권1호
• /
• pp.113-139
• /
• 2009

Such is an elective affinity between literary studies and psychoanalysis that the latter sometime serves as a form of literary pedagogy. The affinity mainly consists in their shared concern for language. The signification of language in psychoanalysis is much similar to that of literature. Many of psychoanalytic terms and theoretical tenets bear witness to its dependence clinically on speech phenomena and theoretically on language in general. It is most true of Sigmund Freud, for whom the unconscious is in effect the linguistic unconscious. The Freudian unconscious, compressing and displacing through images and ideas, works as a text for psychoanalysis, which approach has not only paved one of the ways to poststructuralist anti-essentialism but with which literary studies also feel uncanny familiarity. Freudian psychoanalysis, starting empirically from clinical observations, discovers that words exist independent of meanings in the form of things in the unconscious system. Out of the various sensory elements of a word-thing, in psychoanalytic terms, the auditory is central. Now with the auditory imagination cultivated in the clinic, Freud figures out compression and displacement as the chief unconscious works, of which my main argument is that they are based phonetically on heteronym and homonym associations respectively. Compression and displacement work to be masks, which excites Freud's sense of challenge: his is a kind of poststructuralist approach, in the sense that the closed interrelatedness of words without external referents determines the signification in a given situation. But the works of compression and displacement, viewed in auditory terms rather than mapped on to metaphor and metonymy, can provide a new insight for a literary reading of Freud. Pursuing Freud's auditory imagination is not only an attempt to read his writing as literary text rather than for theoretical discussion, but also an experiment with the possibility of literary reading of a theoretical text in the age of after-theory.