• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.127-130
• /
• 2002

Supersonic jet flow has been applied to many various industrial applications of manufacturing fields. Such a supersonic jet is generally classified by three flow patterns, depending on the flow state at nozzle exit, that is, under-, correctly- and over-expanded flows. Of these three flows, the correctly-expanded supersonic jet is most frequently used since it provides a maximum performance of a flow device. However detailed information on what conditions are the Jet correctly expanded at the exit of nozzle is not well known. In the current study, computations are applied to the axisymmetric, compressible, Navier-Stokes equations. The design Mach number used are 2.0,1.2 and 2.6. The computational results obtained are compared with the previous experimental ones. A theoretical analysis is conducted to predict the major features of the correctly-expanded jet. The results show that the jet core length is increased as Mach number is increased.

• Advances in aircraft and spacecraft science
• /
• 제1권4호
• /
• pp.443-454
• /
• 2014

An experimental study was conducted to investigate the effect of Reynolds number on compressible convex-corner flows, which correspond to an upper surface of a deflected flap of an aircraft wing. The flow is naturally developed along a flat plate with two different lengths, resulting in different incoming boundary layer thicknesses or Reynolds numbers. It is found that boundary layer Reynolds number, ranging from $8.04{\times}10^4$ to $1.63{\times}10^5$, has a minor influence on flow expansion and compression near the corner apex in the transonic flow regime, but not for the subsonic expansion flow. For shock-induced separated flow, higher peak pressure fluctuations are observed at smaller Reynolds number, corresponding to the excursion phenomena and the shorter region of shock-induced boundary layer separation. An explicit correlation of separation length with deflection angle is also presented.

• 반도체디스플레이기술학회지
• /
• 제7권2호
• /
• pp.55-58
• /
• 2008

The objective of the research is to design, manufacture and test a Mass Flow Controller(MFC) capable of measuring compressible fluid flows based on a "bucket and stop-watch"method. The basic principle is the measurement of time, where the time taken to fill and empty a bucket of known volume is measured. This method of flow measurement is a new concept when compared to a commercilized current mass flow controller. For the flow meter to be able to compete with established designs it not only must be comparable in cost and robustness, it must be very accurate and reliable as well. This device should be able to handle fluid flows in the range of 0.1ml/min to 10ml/min within an accuracy of ${\pm}$1%. A possible application for a device such as this is in electronics industry where arsenic gas is used in the production of silicon chips.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.187-195
• /
• 2012

본 연구에서는 터보펌프 인듀서 주변의 극저온 유동장에 대한 수치해석을 주로 다룬다. 이를 위해 수치해석에 사용된 수치기법에 대한 내용을 우선 다룬다. 수치기법에 대한 검증 문제로 2차원/축대칭 극저온 유동문제를 해석하였고 이 과정에서 다양한 공동모델에 대한 비교 연구를 수행하였다. 마지막으로 3차원 터보펌프 인듀서에 대한 수치해석을 수행하고, 실험 결과와 타 연구결과와 비교함과 동시에 극저온 유체에서 나타나는 공동현상의 특징을 살펴보았다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 춘계 학술대회논문집
• /
• pp.29-34
• /
• 1998

An efficient 3-dimensional compressible solver is developed using the second-order upwind TVD scheme and the multigrid diagonalized ADI method. The multigrid method is improved so that the present DADI algorithm obtains better convergence rates. Results are computed on Cray C90 computer for transonic unsaperated flows past ONERA-M6 wing to demonstrate the accuracy and efficiency. The results show good agreement with experimetal data. A reduction of four orders of residual for 3-dimensional transonic flow is obtained about 99 seconds.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 12th Asian Congress of Fluid Mechanics
• /
• pp.75.3-75.3
• /
• 2008

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
• /
• pp.337-345
• /
• 2002

The present study addresses a computational result of unsteady gas flow through a critical nozzle. The axisymmetric, unsteady, compressible, Wavier-Stokes equations are solved using a finite volume method that makes use of the second order upwind scheme for spatial derivatives and the multi-stage Runge-Kutta integral scheme for time derivatives. The steady solutions of the governing equation system are validated with the previous experimental data to ensure that the present computational method is valid to predict the critical nozzle flows. In order to simulate the effects of back pressure fluctuations on the critical nozzle flows, an excited pressure oscillation with an amplitude and frequency is assumed downstream of the exit of the critical nozzle. The results obtained show that for low Reynolds numbers, the unsteady effects of the pressure fluctuations can propagate upstream of the throat of critical nozzle, and thus giving rise to the applicable fluctuations in mass flow rate through the critical nozzle, while for high Reynolds numbers, the pressure signals occurring at the exit of the critical nozzle do not propagate upstream beyond the nozzle throat. For very low Reynolds number, it is found that the sonic line near the throat of the critical nozzle remarkably fluctuateswith time, providing an important mechanism for pressure signals to propagate upstream of the nozzle throat, even in choked flow conditions. The present study is the first investigation to clarify the unsteady effects on the critical nozzle flows.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.459-464
• /
• 2000

In order to investigate the effectiveness of an orifice system in producing pressure drops and the effect of compressibility on the Pressure drop, computations using the mass-averaged implicit Wavier-Stokes equations were applied to the axisymmetric pipe flows with the operating pressure ratio from 1.5 to 20.0. The standard k-e turbulence model was employed to close the governing equations. Numerical calculations were carried out for some combinations of the multiple orifice configurations. The present CFD data showed that the orifice systems, which have been applied to incompressible flow regime to date, can not be used for the hint operating Pressure ratio flows. The orifice interval did not strongly affect the total pressure drop but the orifice area ratio more than 2.5 led to high pressure drops. The total pressure drop rapidly increased in the range of the operating pressure ratio from 1.5 to 4.0, but it did not depend on the operating pressure ratio over 4.0.

• 한국항공우주학회지
• /
• 제33권8호
• /
• pp.8-17
• /
• 2005

저속 압축성 유동에서 사용하는 예조건화 기법은 수렴성 증진에 효과적이다. 본 연구에서는 일반적인 오일러 지배 방정식과 각각 다르게 무차원화한 세 가지 종류의 예조건화 기법을 3차 공간 정확도의 MUSCL, DADI, 다중 격자, 국소 시간 전진 기법을 이용하여 2차원 비점성 bump 유동에 적용하였다. 결과적으로 국소 예조건화 기법에 전역 예조건화 기법의 압력 항 무차원화 방법을 적용하면, 마하수에 무관한 수렴 특성을 얻을 수 있다. 또한, 점근해석을 이용하여 각 예조건화 기법의 특성에 대해 언급하였다.

• 한국항공우주학회지
• /
• 제33권8호
• /
• pp.92-98
• /
• 2005

스크린은 유동저항을 일으켜 유동의 난류, 속도 및 압력 특성을 변화시킬 수 있으며, 이에 따라 유동제어 방법으로 널리 사용되어 왔다. 과거 관련 분야 연구들은 마하수가 0.3에서 0.7 사이의 유동에 제한되어 왔고, 초음속 유동에서 나타나는 충격파 구조에 대한 연구는 수행되어진 바 없다. 따라서 본 연구에서는 철선으로 엮어진 스크린 후방에서 나타나는 축대칭 초음속 제트유동장에 대한 실험적 관찰이 이루어졌다. 다양한 제트유동 팽창조건에 대하여 스크린 후방에서 연속 및 순간광원을 이용한 쉴리렌 유동가시화와 피토압력/유동소음 측정이 이루어졌다. 노즐 출구에 설치된 스크린의 다공도와 설치 기울기 변화에 따른 영향도 관찰되었으며, 얻어진 결과는 스크린이 설치되지 않은 경우와 서로 비교되었다.