• International Journal of Industrial Entomology and Biomaterials
• /
• v.16 no.2
• /
• pp.57-59
• /
• 2008

While searching for pancreatic lipase inhibitors, the active compound was found in a methanol extract of Apis mellifera venome. The active compound was isolated by Diaion HP-20 column chromatography, thin layer chromatography and HPLC. The active compound is stable to the extreme pH and heat. There is no loss of activity both in acidic and alkaline solution in the pH range of 2 to 11 by heating for 15 minutes at $90^{\circ}C$. The rf value of the compound was 0.51 at TLC with butanol : methanol: water (4:1:2) solvent system. The molecular weight of the compound was determined to be 293 by EI-MS.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.18 no.3
• /
• pp.1-8
• /
• 2010

A design study has been performed to obtain configuration and weight of a compound gyroplane. A study of research trends and characteristics was performed to develop the compound gyroplane sizing program. Based on these results, the sizing program has been developed and its suitability has been validated using existing compound gyroplane data. The subject air vehicles was a Challis Heliplane UAV, Carter Coptet, FB-1 Gyrodyne, and Jet Gyrodyne. As results, the program was suitable to size a compound gyroplane at conceptual design phase, because the greatest error rate was less than 10% and the conceptual design allowance error rate is less than 15%.

• Korean Journal of Materials Research
• /
• v.12 no.6
• /
• pp.427-430
• /
• 2002

Plasma nitrocarburizing treatment was performed for SCM 435 steel by using a plasma ion nitriding system. The effects of the variation of nitrogen and methan contents upon the hardened layer was investigated. Both the thickness of the compound layer and the amount of $\varepsilon$ phase in the compound layer increased with increasing nitrogen content. However, the thickness of the compound layer decreased due to unstable plasma for an atmosphere containing 90% $N_2$ gas content in the gas mixture. The amount of $\varepsilon$phase in the compound layer increased with increasing $CH_4$ gas content. For $CH_4$ gas content more than 2% in the gas mixture, the thickness of the compound layer decreased due to the formation of $\theta$ phase.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.291-294
• /
• 2000

Free-form surfaces arise in shipbuilding, automotive and aerospace industries. Specially compound free-form surfaces so do. Machining complicated products consist of compound surface, it is very important to avold and remove tool interferences. By the way, in compound surfaces the tool interference can occur not only in the tool path direction but also in the other direction. A new tool interference detection and correction using tool interference conditions is suggested to identify and correct the tool interference in compound surfaces.

• Journal of Mechanical Science and Technology
• /
• v.15 no.12
• /
• pp.1829-1834
• /
• 2001

The choking of dual subsonic streams flowing through a convergent duct in contact has been investigated experimentally and theoretically. The experiment was conducted by using blow-down wind tunnel. The condition, when the dual stream flow chocking (compound choking) occurs at the nozzle exit, was explained by one-dimensional analysis of compound sound wave propagation. The experimental results for the condition of compound choking were compared with the prediction from theoretical analysis, and the schlieren optical method using the spark light source has been used to visualize the flowfield.

• MALSORI
• /
• no.42
• /
• pp.25-36
• /
• 2001

Stress assignment has been much discussed in the literature on English compound nouns. The general view of the stress pattern of English compound nouns is that a main stress falls on the first element and a secondary stress on the second element; however, a stress pattern is often employed that provides counterevidence to the traditional pedagogical approach. A new idea is suggested by Ladd(1984) that 'compound stress represents the deaccenting of the head of the compound.' Recent studies show that initial stressing does not indicate compounds and syntactic phrases are not always characterized by final stressing. In his pilot test Pennanen comments on the frequent variation of stress patterns on individual items, on the basis of which Bauer confirms Pennanen's results with different informants. This paper is an attempt to justify Bauer's analysis with the same data as Bauer's and different subjects. It turns out that the competences of native-speaker informants do not rovide clear-cut answers. Some factors should be taken into account in assigning appropirate stress to compound nouns.

• Carbon letters
• /
• v.10 no.2
• /
• pp.101-108
• /
• 2009

Various silanes, amino silane, vinyl silane, TESPD, and ZS (TESPD/zinc soap complex), are added into chlorinated isobutylene-isoprene copolymer (CIIR)/hard clay/carbon black (CB) compound and they are investigated with respect to the vulcanization characteristics, the processability, and the mechanical properties. In hard clay/CB filled system, only ZS silane added compound shows both lower Mooney viscosity and extrusion torque while vinyl silane added compound showed only a lower extrusion torque. All the ZS added compounds showed the lowest viscosity among them. The silane added compounds showed an increased modulus. In 'fatigue to failure' count test, the ZS added compound showed superior counts compared to other silane (amino, vinyl, TESPD) added compounds. The mechanical properties were significantly increased when the S2 and ZS were added into CIIR/hard clay/CB compound. The ZS added compounds showed a significant improvement on elongation modulus.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.108-113
• /
• 2004

The compressive axial collapse tests were performed to investigate energy absorption characteristics of Al/CFRP compound tubes which are aluminum tubes wrapped with CFRP (Carbon Fiber Reinforced Plastics) outside the aluminum circular and square tubes. Based on collapse characteristics of aluminum tubes and CFRP tubes respectively, the axial collapse tests were performed for Al/CFRP compound tubes which have different fiber orientation angles. Test results showed that Al/CFRP compound tubes supplemented the unstable brittle failure of CFRP tubes due to ductile nature of inner aluminum tubes. In the light-weight aspect, specific energy absorption were the highest for Al/CFRP, CFRP in the middle, and aluminum the lowest. Also, specific energy absorption of circular tubes was higher than square tubes'. It turned out that fiber orientation angle of Al/CFRP compound tubes influence specific energy absorption together with the collapse modes of the tubes.

• Journal of Korea Multimedia Society
• /
• v.9 no.2
• /
• pp.151-159
• /
• 2006

The ratio of a segmentation algorithm of compound nouns causes an effect a lot in nouns which are not in the dictionary. The structure of Korean compound nouns are mostly derived from the Chinese characters and it includes some preference ratio. So it will be able to use segmentation rule of compound nouns. This paper suggests a segmentation algorithm using some preference ratio of Korean compound nouns which are not in the dictionary. The experiment resulted in getting 88.49% of correct segmentation and showed effective result from the comparative experimentation with other algorithm.

• Journal of the Korean Society of Industry Convergence
• /
• v.13 no.4
• /
• pp.191-196
• /
• 2010

This study explores the solution of a variety of conditions of the natural dyeing with the Mulberry. To obtain this, the Cu complex compound was added into the extracts. The Mulberry extract was added the Copper acetate to obtain the Black sediment the metal complex compound of anthocyanidin. According to the result of using the complex compound of the solid material, the dyeing properties were excellent. The metal complex compound acted as a mordant, thus it reduced the process of mordanting in the natural dying.