• 한국환경농학회지
• /
• 제1권1호
• /
• pp.1-13
• /
• 1982

전국의 논, 밭, 과수원 및 plastic film house 토양시료 236점을 1981년(年) 4월(月)부터 5월(月)사이에 채취(採取), 유기염소계 잔류농약을 GLC로 분석하였다. 실험결과(實驗結果)는 다음과 같이 요약(要約)하였다. 1) ${\alpha}-BHC$, ${\gamma}-BHC$, PCNB, heptachlor, aldrin, heptachlor epoxide, ${\alpha}-endosulfan$, dieldrin, p,p'-DDD 및 p,p'-DDT 등의 잔류농약성분이 국내 농경지에서 검출되었다. 2) 과수원토양에 잔류성 유기염소계농약이 가장 많았고 논 및 밭토양의 잔류수준은 이에 비해 훨씬 낮았다. 3) 논 및 밭토양에 비해 과수원토양에는 aldrin, ${\alpha}-endosulfan$, dieldrin, p,p'-DDD 및 p,p'-DOT의 검출빈도(檢出頻度)와 잔류수준이 높았다. 4) ${\alpha}-BHC$와 ${\gamma}-BHC$는 모든 공시토양(供試土壤)에서 검출되었으나 농경지별 차이가 없었고, 평균잔류량은 $0.008{\sim}0.014$ ppm였다 . 5) 과수원토양의 높은 p,p'-DDT의 잔류량에 관해 토론(討論)하였고 현용(現用) 또는 사용(使用)이 금지(禁止)된 농약에 대한 잔류연구의 필요성을 강조하였다.

• Archives of Reconstructive Microsurgery
• /
• 제13권1호
• /
• pp.43-50
• /
• 2004

One of the major advantages of microsurgical reconstruction for defects of the hand is that these techniques allow for selection of the most ideal tissue to reconstruct a particular defect, thus optimizing the functional and aesthetic outcome. The dorsalis pedis free flap is an excellent reconstructive tool for various hand reconstructions. It has a reliable vasculature with vessels that are relative large on a long pedicle. It provides thin pliable tissue and be innervated by deep peroneal nerve. Coupled with its thinness and pliability, it is ideal for innervated cover of critically sensitive area, especially such as the hand. Thus it can be used as a cutaneotendinous flap, or an osteocutaneous flap. Otherwise, the major criticism with this flap is related to its uncertain vascularity and the donor defect. It is the purpose of this paper to outline our technique of flap elevation and donor site closure and to indicate our current use of this flap in hand reconstruction. We have treated 10 cases (6 burn scar contracture cases, 4 acute hand trauma cases) of hand reconstruction from Dec. 3, 1997 to Mar. 4, 2004 using dorsalis pedis free flap. The key points for sucess in terms of a viable flap and acceptable donor site are the preservation of the critical dorsalis pedis-first dorsal metatarsal vascular axis and the creation of a viable bed for grafting. In addition, we substituted preserved superficial fat skin graft for split thickness skin graft and wet environment was offered for good graft take. Preserved superficial fat skin is defined as composite graft containing epidermis, dermis and superficial fat layer. With sufficient care in flap elevation and donor site closure, a good graft take of preserved superficial fat skin under wet environment can be achieved with no functional disability and minimal cosmetic deformity in donor site. This flap has proved itself to be a best choice for hand reconstruction.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 춘계학술대회
• /
• pp.235-237
• /
• 2001

;Dentistry has benefited from tremendous advances in technology with the introduction of new techniques and materials, and patients are aware that esthetic approaches in dentistry can change one's appearance. Increasingly. tooth-colored restorative materials have been used for restoration of posterior teeth. Tooth-colored restoration for posterior teeth can be divided into three categories: 1) the direct techniques that can be made in a single appointment and are an intraoral procedure utilizing composites: 2) the semidirect techniques that require both an intraoral and an extraoral procedure and are luted chairside utilizing composites: and 3) the indirect techniques that require several appointments and the expertise of a dental technician working with either composites or ceramics. But, resin restoration has inherent drawbacks of microleakage. polymerization shrinkage, thermal cycling problems. and wear in stress-bearing areas. On the other hand, Ceramic restorations have many advantages over resin restorations. Ceramic inlays are reported to have less leakage than resin restoration and to fit better. although marginal fidelity depends on technique and is laboratory dependent. Adhesion of luting resin is more reliable and durable to etched ceramic material than to treated resin composite. In view of color matching, periodontal health. resistance to abrasion, ceramic restoration is superior to resin restorationl. Materials which have been used for the fabrication of ceramic restorations are various. Conventional powder slurry ceramics are also available. Castable ceramics are produced by centrifugal casting of heat-treated glass ceramics. and machinable ceramics are feldspathic porcelains or cast glass ceramics which are milled using a CAD/CAM apparatus to produce inlays (for example, Cered. They may also be copy milled using the Celay apparatus. Pressable ceramics are produced from feldspathic porcelain which is supplied in ingot form and heated and moulded under pressure to produce a restoration. Infiltrated ceramics are another class of material which are available for use as ceramic inlays. An example is $In-Ceram^{\circledR}$(Vident. California, USA) which consists of a porous aluminum oxide or spinell core infiltrated with glass and subsequently veneered with feldspathic porcelain. In the 1980s. the development of compatible refractory materials made fabrication easier. and the development of adhesive resin cements greatly improved clinical success rates. This case report presents esthetic ceramic inlays for posterior teeth.teeth.

• Korean Chemical Engineering Research
• /
• 제55권1호
• /
• pp.60-67
• /
• 2017

본 연구에서는 생분해성인 microcrystalline cellulose (MCC)를 표면 개질하여 음식포장재로 사용하는 polyethylene (PE) 복합체의 충전제로 사용하기 위한 사전 연구를 수행하였다. 1 분자 당 1 차 아미노기 1개와 2차 아미노기 2개씩을 가지는 실란커플링제인(3-trimethoxysilylpropyl)diethylenetriamine (TPDT)를 사용하여 MCC 표면에 이산화탄소 흡착 기능이 있는 아미노기를 도입하였다. TPDT 도입량, 팽윤시간, 반응온도 및 반응시간과 같은 다양한 반응 조건들을 변화시켜 각각의 반응조건의 변화가 MCC 표면 개질 정도에 미치는 영향을 연구하였다. MCC 표면에 접목된 TPDT의 양 및 화학결합생성을 Fourier transform infrared spectroscopy (FT-IR), elemental analysis (EA), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA) 및 고체 상태 $^{29}Si$ nuclear magnetic resonance (NMR)법을 사용하여 분석하였다. 반응시간, 반응온도 및 TPDT 도입량이 증가할수록 MCC 표면에 접목되는 TPDT 양이 증가함을 확인하였다.

• Corrosion Science and Technology
• /
• 제9권4호
• /
• pp.147-152
• /
• 2010

Conventional paints for conversion coating applications in steel production derived mainly from water-based polymer dispersions containing several additives actually show good general performance, but suffer from poor scratch and abrasion resistance during use. The reason for this is because the relatively soft organic binder matrix dominates the mechanical surface properties. In order to maintain the high quality and decorative function of coated steel sheets, the mechanical performance of the surface needs to be improved significantly. In fact the wear resistance should be enhanced without affecting the optical appearance of the coatings by using appropriate nanoparticulate additives. In this direction, nanocomposite coating compositions (Nanomer$^{(R)}$) have been derived from water-based polymer dispersions with an increasing amount of surface-modified nanoparticles in aqueous dispersion in order to monitor the effect of degree of filling with rigid nanoparticles. The surface of nanoparticles has been modified for optimum compatibility with the polymer matrix in order to achieve homogeneous nanoparticle dispersion over the matrix. This approach has been extended in such a way that a more expanded hybrid network has been condensed on the nanoparticle surface by a hydrolytic condensation reaction in addition to the quasi-monolayer type small molecular surface modification. It was expected that this additional modification will lead to more intensive cross-linking in coating systems resulting in further improved scratch-resistance compared to simple addition of nanoparticles with quasi-monolayer surface modification. The resulting compositions have been coated on zinc-galvanized steel and cured. The wear resistance and the corrosion protection of the modified coating systems have been tested in dependence on the compositional change, the type of surface modification as well as the mixing conditions with different shear forces. It has been found out that for loading levels up to 50 wt.-% nanoparticles, the mechanical wear resistance remains almost unaffected compared to the unmodified resin. In addition, the corrosion resistance remained unaffected even after $180^{\circ}$ bending test showing that the flexibility of coating was not decreased by nanoparticle addition. Electron microscopy showed that the inorganic nanoparticles do not penetrate into the organic resin droplets during the mixing process but rather formed agglomerates outside the polymer droplet phase resulting in quite moderate cross linking while curing, because of viscosity. The proposed mechanisms of composite formation and cross linking could explain the poor effect regarding improvement of mechanical wear resistance and help to set up new synthesis strategies for improved nanocomposite morphologies, which should provide increased wear resistance.

• 한국포장학회지
• /
• 제24권1호
• /
• pp.1-11
• /
• 2018

본 연구에서는 수출 가능한 식품포장재로 pro-oxidant($d2w^{(R)}$)함유 rPP/ZnO 나노컴포지트 유연필름을 제조하였고, 이 산화분해 필름의 기계적 특성과 항균기능을 조사하였다. 산화분해필름은 일정조건의 열과 자외선 처리를 거친 후 특성분석으로 FT_IR, SEM, UTM, GPC를 측정하여 물성변화를 관찰하였다. 카보닐지수와 하이드록실지수에서 열과 자외선에 노출율이 많아질수록 수치는 상승하였다. 표면분석에서는 rPP/$d2w^{(R)}$/ZnO나노컴포지트 필름의 경우 표면이미지가 매끈하여 ZnO의 첨가가 고분자의 상용성을 향상시켰고, 열과 자외선차단효과로 분해를 감소시키는 효과로 작용하였다. 항균력시험에서는 그람음성균은 대장균으로 그람양성균은 황색포도상구균으로 항균력을 측정하였다. 결과로는, ZnO는 시험에 사용한 농도에서 3로그 이상의 미생물 감소율을 나타내었다. 그러나 유연 필름용으로는 ZnO의 농도가 높아질수록 투명도가 떨어지므로 사용에 제한이 있었다. rPP/$d2w^{(R)}$/ZnO가 함유한 시편에서 인장강도는 40% 상승하였고, 신율은 30% 감소되었다. ZnO를 첨가한 경우 기계적 물성상승과 열 안전성과 자외선차단성을 나타내었다. 산화분해능은 열 노출 $70^{\circ}C$ 온도에서 480시간 경과한 후, 자외선 조사로 72시간 노출 이후 시점의 분자량은 수평균분자량이 1,294 g/mol, 무게평균분자량이 5,920 g/mol로 분해되는 결과를 얻었다. 이것으로 UAE 5009:2009, ASTM 6954의 기준에 준한 필름을 제조할 수 있었다. 비교시편과 본 연구에서 제조한 산화분해필름의 분자량이 80.7%와 75.6% 감소한 결과를 얻음으로서, 자연 산화분해됨을 확인하였다. 식품포장재로서 안전성분석에서는 국내법 중 식품접촉플라스틱 폴리프로필렌의 기준에 적합하였다.

• 디지털융복합연구
• /
• 제10권11호
• /
• pp.427-432
• /
• 2012

본 연구는 복합저장소 구축 방법과 복합지식 프로세스 개발을 위한 기술적 방법을 제안하였다. 본 연구에서 제안한 복합지식 저장소에 저장되는 데이터 대상은 복합지식 메타데이터와 디지털 자원 모두를 포함하며, 사용목적에 따라 사용자 역할, 기능적 요소, 서비스 범주로 나눌 수 있다. 이 세 가지 요소는 저장소의 추상적 모델을 설명하는 기본적인 구성요소이다. 본 연구에서는 복합지식의 메타데이터를 2가지 요소로 구분하여 정의하였다. Component는 지식을 사용하고 생성하는 주체나 활동단위, 리소스 자체 등에 대한 속성을 나타내고, Context는 지식객체가 포함되어 있는 맥락을 나타낸다. 복합지식 프로세스 Agent는 복합지식의 분류와 등록, 검색, 패턴 정보 관리 등의 역할을 수행하고 복합지식 저장소와 사용자 사이의 데이터 흐름과 처리를 담당한다. 복합지식 프로세스 Agent는 데이터의 검색과 추출, 분산 환경에서 데이터 교환을 위한 데이터의 수집과 출력, 저장된 데이터의 추가, 변경 등이 발생한 것을 알려주는 경고, 데이터의 저장과 등록, 메타데이터 조회 후 원하는 물리적 자료를 요청하는 요청과 전달 등의 기능으로 구성하였다. 본 연구에서 개발하고자하는 추천시스템을 위한 복합지식저장소 구축은 산업 현장에서 적시에 다양한 콘텐츠를 사용자에게 제시함으로서 일과 학습이 동시에 일어날 수 있도록 하여 시의적절한 지식을 실시간 가시화함으로써 학습 생산성을 증대하는데 도움을 줄 수 있다.

• 한국재료학회지
• /
• 제27권1호
• /
• pp.39-42
• /
• 2017

E-glass (electrical glass) fiber is the widely used as a reinforced composite material of PCBs (printed circuit boards). However, E-glass fiber is not stable because it has a dielectric constant of 6~7. On the other hand, D-glass (dielectric glass) fiber has a low dielectric constant of 3~4.5. Thus, it is adaptable for use as a reinforcing material of PCBs. In this study, we fabricated D-glass compositions with low dielectric constant, and measured the electrical and optical properties. In the glass composition, the boron content was changed from 9 to 31 wt%. To confirm the dependence of the dielectric constant on melting properties, D-glass with 22 wt% boron was melted at $1550^{\circ}C$ and $1650^{\circ}C$ for 2hrs. The glass melted at $1650^{\circ}C$ had a lower dielectric constant than the glass melted at $1550^{\circ}C$. Therefore, the D-glass with boron of 9~31 wt% was fabricated by melting at $1650^{\circ}C$ for 2hrs, and transparent clear glass was obtained. We identified the non-crystalline nature of the glass using an XRD (x-ray diffractometer) graph. The visible light transmittance values depending on the boron contents were measured and found to be 88.6 % ~ 82.5 %. Finally, the dielectric constant of the D-glass with 31 wt% boron was found to have decreased from 4.18 to 3.93.

• 멤브레인
• /
• 제20권4호
• /
• pp.312-319
• /
• 2010

탄소막은 고분자막에 비해 높은 선택성과 투과성, 열적, 화학적 안정성을 가지고 있어 기체 분리, 특히 휘발성 유기화합물(VOCs) 분리막으로 많은 관심을 받고 있다. 활성탄소중공사막은 기공 표면(pore wall)에 형성된 흡착성 미세기공에 의해 선택적으로 응축성 성분이 흡착, 확산되는 흡착-확산 기구에 의해 흡착성-비흡착성 물질이 분리된다. 본 연구에서는 다공성 알루미나 중공사막 지지체에 phenolic resin (novolac type)을 코팅한 후 산화, 탄화 및 활성화 등의 열분해 과정을 통해 막 표면과 기공 표변에 흡착성 미세기공이 형성된 활성탄소중공사막을 제조하였다. 또한 열분해 조건에 따른 phenol/alumina 복합 활성탄소중공사막의 물리적 특성과 기체 투과특성에 대해 살펴보았다. 그 결과, 제조된 phenol/alumina 복합 활성탄소중공사막이 휘발성 유기물질의 대부분을 차지하고 있는 탄화수소를 선택적으로 분리 회수하는데 매우 효과적인 특성을 갖고 있음을 확인할 수 있었다. 따라서 본 연구에서 개발된 phenol/alumina 복합 활성탄소중공 사막은 VOCs의 분리, 농축에 매우 효과적으로 활용 가능할 것으로 기대된다.

• Journal of Pharmaceutical Investigation
• /
• 제30권3호
• /
• pp.191-199
• /
• 2000

Genomics is providing targets faster than we can validate them and combinatorial chemistry is providing new chemical entities faster than we can screen them. Historically, the drug discovery cascade has been established as a sequential process initiated with a potency screening against a selected biological target. In this sequential process, pharmacokinetics was often regarded as a low-throughput activity. Typically, limited pharmacokinetics studies would be conducted prior to acceptance of a compound for safety evaluation and, as a result, compounds often failed to reach a clinical testing due to unfavorable pharmacokinetic characteristics. A new paradigm in drug discovery has emerged in which the entire sample collection is rapidly screened using robotized high-throughput assays at the outset of the program. Higher-throughput pharmacokinetics (HTPK) is being achieved through introduction of new techniques, including automation for sample preparation and new experimental approaches. A number of in vitro and in vivo methods are being developed for the HTPK. In vitro studies, in which many cell lines are used to screen absorption and metabolism, are generally faster than in vivo screening, and, in this sense, in vitro screening is often considered as a real HTPK. Despite the elegance of the in vitro models, however, in vivo screenings are always essential for the final confirmation. Among these in vivo methods, cassette dosing technique, is believed the methods that is applicable in the screening of pharmacokinetics of many compounds at a time. The widespread use of liquid chromatography (LC) interfaced to mass spectrometry (MS) or tandem mass spectrometry (MS/MS) allowed the feasibility of the cassette dosing technique. Another approach to increase the throughput of in vivo screening of pharmacokinetics is to reduce the number of sample analysis. Two common approaches are used for this purpose. First, samples from identical study designs but that contain different drug candidate can be pooled to produce single set of samples, thus, reducing sample to be analyzed. Second, for a single test compound, serial plasma samples can be pooled to produce a single composite sample for analysis. In this review, we validated the issue whether the second method can be applied to practical screening of in vivo pharmacokinetics using data from seven of our previous bioequivalence studies. For a given drug, equally spaced serial plasma samples were pooled to achieve a 'Pooled Concentration' for the drug. An area under the plasma drug concentration-time curve (AUC) was then calculated theoretically using the pooled concentration and the predicted AUC value was statistically compared with the traditionally calculated AUC value. The comparison revealed that the sample pooling method generated reasonably accurate AUC values when compared with those obtained by the traditional approach. It is especially noteworthy that the accuracy was obtained by the analysis of only one sample instead of analyses of a number of samples that necessitates a significant man-power and time. Thus, we propose the sample pooling method as an alternative to in vivo pharmacokinetic approach in the selection potential lead(s) from combinatorial libraries.