• 제목/요약/키워드: Composite filter

검색결과 182건 처리시간 0.03초

복합 유전체기판상에 비대칭 결합 마이크로스트립 대역통과필터의 설계 (Design of Asymmetrical Coupled Microstrip BandPass Filter on Composite Dielectric Substrate)

  • 김익수;문승찬
    • 한국통신학회논문지
    • /
    • 제29권1A호
    • /
    • pp.77-83
    • /
    • 2004
  • 초고주파 회로에서 광범위하게 이용되는 평행 결합 마이크로스트립 대역통과필터는 좁은 대역폭 과 2차 스프리어스 통과대역으로 필터의 응용을 제한한다. 이와 같은 문제를 해결하기 위해서 복합 유전체기판상에 비대칭 결합 마이크로스트립 선로를 이용하는 방법을 제시하였다. closed-form해석방법을 이용하여 복합 유전체기판상에 비대칭 결합 마이크로스트립 선로를 해석하고 중심주파수 9GHz 에서 정규화 대역폭 $33\%$을 갖는 필터를 제작하였다. 단층기판을 갖는 필터와 비교하면 복합 유전체기판을 이용한 필터는 스프리어스 통과대역이 약 20dB 이상 개선됨을 보였다

탄소섬유 복합여과재의 제조 및 물성연구 (A Study on the Preparation and Characterization of Carbon Fiber Composite Filter)

  • 이재춘;신경숙;이덕용;김병균;심선자;임연수;정윤중
    • 한국세라믹학회지
    • /
    • 제32권9호
    • /
    • pp.989-994
    • /
    • 1995
  • Rigid porous carbon fiber composites with the uniform pore size distribution were prepared by vacuum forming from water slurries containing carbonized PAN fibers, a phenolic resin and ceramic binders. The composites were designed to use for highly efficient carbon fiber filters for particulate filtration and gas adsorption. As the as-received carbon fibers of 1mm in length were milled to an approximate average length of 300${\mu}{\textrm}{m}$, modulus of rupture (MOR) of the composite filter was increased from 1MPa to the value larger than 5 MPa. Modulus of rupture (MOR) for the composite filter fabricated using the milled carbon fiber was increased from 5 MPa to 10 MPa as the carbonization temperature of the PAN fiber was raised from 90$0^{\circ}C$ to 140$0^{\circ}C$. The air permeability and an average pore size of the composite filter were increased from 40 to 270cc/min.$\textrm{cm}^2$ and from 35 to 80${\mu}{\textrm}{m}$, respectively, as the apparent porosity increased from 80 to 95%. It was shown that the MOR of the carbon fiber composite filter was dependent primarily on the average length of carbon fiber, carbonization temperature and the type of bonding materials.

  • PDF

미만성 간질환의 초음파 영상에서 노이즈 감소를 위한 복합필터의 설계 및 유용성에 관한 연구 (A Study on Effectiveness of Designed Composite Filter with Noise Reduction in Ultrasound Image for Diffuse Liver Disease)

  • 이진수;김창수;임인철;양성희
    • 한국방사선학회논문지
    • /
    • 제11권2호
    • /
    • pp.69-77
    • /
    • 2017
  • 본 연구는 영상의 노이즈 감소를 위한 복합필터 제안과 간 초음파영상에서 노이즈 제거를 통한 영상품질의 향상으로 정확한 영상 해석에 도움을 주고자 하였다. 실험은 ATS-539 다목적용 초음파팬텀을 이용하여 Gaussian blurring filter, Sharpening filter, Median filter의 조합으로 상위 7개의 복합필터를 선정하고 이를 간 초음파영상에 적용하였다. 그 결과 상위 7개 복합필터 적용하였을 때 SNR, CNR, MSR 값이 모두 증가하는 것으로 나타났다. 이 중 복합필터 1과 2가 가장 높은 값을 나타내었다. 또한 PSNR 30 dB이상, SSIM 1에 가까운 결과값을 나타내어 영상의 손실률이 적음을 알 수 있었다. 따라서 본 연구에서 제안한 복합필터의 적절한 적용은 정확한 영상의 판독과 해석에 도움을 줄 수 있을 것이다.

Performance Study of Composite Air Filters Using Heterogeneous Fibers

  • Lee, Ji Soo;Oh, Yuree;Kim, Heejin;Park, Hyun-Seol;Yoon, Sam S.;Lee, Min Wook
    • Composites Research
    • /
    • 제35권3호
    • /
    • pp.216-221
    • /
    • 2022
  • Recently, the worldwide demand for disposable masks has increased due to COVID-19 infections and severe air pollution. Personal masks should reduce breathe resistance while maintaining filtering performance. In this study, a solution blowing process is used to produce composite nanofiber filters to co-spin two polymers at once. The manufacture process of the various fiber diameter filter was designed, and the filtration performance and differential pressure of the prepared filter was investigated. Poly vinylidene fluoride-hexafluoropropylene (PVDF-HFP) and Polylactic acid (PLA) fibers were chosen to be entangled together in a layer with a diameter of 1.05 ㎛ and 0.33 ㎛. Composite nanofilters showed up to 87% filtration efficiency and 32 Pa differential pressure.

최적화된 비선형 합성필터를 이용한 얼굴인증 시스템 (Face Verification System Using Optimum Nonlinear Composite Filter)

  • 이주민;염석원;홍승현
    • 대한전자공학회논문지SP
    • /
    • 제46권3호
    • /
    • pp.44-51
    • /
    • 2009
  • 본 논문에서는 상관에 기반 한 비선형 합성필터를 이용한 왜곡과 잡음에 강인한 얼굴인식 방법을 연구한다. 상관도 기반 방법은 얼굴 영역의 검출과 인증을 동시에 수행하여 보다 신속한 처리를 할 수 있다는 장점이 있다. 최적화된 비선형 합성필터는 학습영상의 출력 값을 일정하게 유지하면서 입력 영상과 잡음의 필터 출력에너지를 최소화함으로써 얻어진다. 입력 영상의 출력에너지를 최소화하여 허위표적과의 식별력을 부여하고 잡음의 출력에너지를 최소화하여 가산성 잡음에 대한 강인성을 증대한다. 본 논문에서는 비선형 합성필터를 두 개의 학습 영상으로 구성하여 표적의 왜곡과 저해상도 그리고 잡음 환경 하에서 얼굴 인증을 실험하였다. 실험결과는 비선형 합성필터가 SDF(synthetic discriminant function) 필터와 비교하여 ROC(receiver operating characteristics) 커브에서 우수한 성능을 보인다.

A Protection Ratio with Composite Fade Margin for Detailed Frequency Coordination in Microwave Relay System Network

  • Suh, Kyoung-Whoan
    • Journal of electromagnetic engineering and science
    • /
    • 제7권2호
    • /
    • pp.83-90
    • /
    • 2007
  • In this paper, the formulation of the protection ratio based upon a composite fade margin and availability is newly presented for the detailed planning of frequency coordination in the microwave relay system network, and computed results for co-channel and adjacent channel protection ratios are illustrated over an actual system with 6.2 GHz. It is shown that the protection ratio to assure a quality of service can be expressed in terms of the composite fade margin, noise-to-interference ratio, net filter discrimination, and system parameters. In addition, the net filter discrimination, depending upon the transmitter spectrum mask and the overall receiver filter characteristic, has been examined to investigate the effect of the adjacent channel protection ratio caused by the adjacent channel interference. Regarding simulated results for 6.2 GHz, 60 km, 64-QAM, and N/I=6 dB at the bit error rate of $10^{-6}$, composite fade margin and co-channel protection ratio yield 25.14 and 50.3 dB, respectively. Also, the net filter discrimination of 26.5 dB and the adjacent channel protection ratio of 23.8 dB are obtained at the first adjacent channel of 30 MHz. The proposed method provides some merits in view of a comprehensive and practical application with more detailed and various system parameters needed to access the criteria for making the proper frequency coordination.

Optimum 비선형 합성필터를 이용한 얼굴인증 (Face Verification Using Optimum Nonlinear Composite Filter)

  • 이주민;염석원;홍승현
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2008년도 하계종합학술대회
    • /
    • pp.867-868
    • /
    • 2008
  • In this paper, we discuss face verification using the optimum nonlinear composite filter. The optimum nonlinear composite filter is derived by minimizing the output energy due to the additive noise and the input scene. We construct the nonlinear composite filter with 3 training images. The performance is analyzed in terms of the detection probability and the false alarm probability showing the robustness to distortion and noise.

  • PDF

Highly Miniaturized and Performed UWB Bandpass Filter Embedded into PCB with SrTiO3 Composite Layer

  • Cheon, Seong-Jong;Park, Jun-Hwan;Park, Jae-Yeong
    • Journal of Electrical Engineering and Technology
    • /
    • 제7권4호
    • /
    • pp.582-588
    • /
    • 2012
  • In this paper, a highly miniaturized and performed UWB bandpass filter has been newly designed and implemented by embedding all the passive elements into a multi-layered PCB substrate with high dielectric $SrTiO_3$ composite film for 3.1 - 4.75 GHz compact UWB system applications. The high dielectric composite film was utilized to increase the capacitance densities and quality factors of capacitors embedded into the PCB. In order to reduce the size of the filter and avoid parasitic EM coupling between the embedded filter circuit elements, it was designed by using a $3^{rd}$ order Chebyshev circuit topology and a capacitive coupled transformation technology. Independent transmission zeros were also applied for improving the attenuation of the filter at the desired stopbands. The measured insertion and return losses in the passband were better than 1.68 and 12 dB, with a minimum value of 0.78 dB. The transmission zeros of the measured response were occurred at 2.2 and 5.15 GHz resulting in excellent suppressions of 31 and 20 dB at WLAN bands of 2.4 and 5.15 GHz, respectively. The size of the fabricated bandpass filter was $2.9{\times}2.8{\times}0.55(H)mm^3$.

다공성 필터에서의 여과 분진층 비저항 연구 (Specific Resistance (K2´) of Dust Layer Deposited on Porous Media)

  • 이선희;이경미;조영민
    • 한국대기환경학회지
    • /
    • 제20권3호
    • /
    • pp.371-380
    • /
    • 2004
  • In the dust separation by using porous filter media, the structure of dust layer deposited on the filter surface of filter medium directly affects the effective filtration. The present study has investigated the specific resistance (K$_2$') of the dust layer and its porosity ($\varepsilon$$_{c}$) for three different filters; FA composite filter, metal fiber filter and stainless filter. The specific resistance (K$_2$') increased and at the same time the cake porosity ($\varepsilon$$_{c}$) decreased with the increase of filtration velocity, possibly due to the compressible effect of dust layer. However, under the low dust concentration, subsequent dust particles would block the open channels through the layer resulting in high specific resistance of the layer. The FA composite filter among three filters was shown to be the most effective filter for dust cake filtration at low filtration velocities less than 0.1 m/s for an approximate dust concentration of 5 g/㎥.

CRLH 전송선로를 이용한 공통 모드 억압 평형 필터 (Common-Mode Suppression Balanced Filter based on Composite Right/Left-Handed Transmission Line)

  • 김영;윤정호;윤영철
    • 한국항행학회논문지
    • /
    • 제15권4호
    • /
    • pp.571-577
    • /
    • 2011
  • 본 논문은 차동 모드로 동작하는 메타 재질 구조를 바탕으로 평형 필터 설계를 제안한 것이다. 이 메타 재질 구조는 차동 모드 동작에서는 Composite Right/Left-Handed(CRLH) 메타 재질로 동작하여 필터 특성을 갖지만, 공통 모드에서는 통과대역이 차단되는 성질을 갖는 평형 CRLH 단위 셀로 구성되었다. 이러한 차동모드 특성을 갖는 단위 셀을 직렬로 4단을 연결하여 필터를 구성하였으며, 제안된 메타 재질의 특성은 차동 모드 평형 필터로 동작하고, 공통 모드에서는 차단되는 특성을 실험 결과를 통하여 확인하였다. 메타 재질을 이용한 평형 필터는 대역폭이 960 MHz~1000 MHz, 4.1dB의 삽입손실을 갖는 특성을 얻었다.