• Journal of the Korean Statistical Society
• /
• 제29권3호
• /
• pp.297-306
• /
• 2000

An efficient method of constructing $textsc{k}$-minimal path sets to evaluate the reliability of a flow network is presented. The network is considered to be in a functioning state if it can transmit a maximum flow which is greater than or equal to a specified amount of flow, $textsc{k}$say, and a $textsc{k}$-minimal path set is a minimal set of branches that satisfies the given flow constraint. In this paper, under the assumption that minimal path sets of the network are known, we generate composite paths by adding only a minimal set of branches at each iteration to get $textsc{k}$-minimal path sets after possibly the fewest composition, and compute maximum flow of composite paths using only minimal path sets. Thereby we greatly reduce the possible occurrence of redundant composite paths throughout the process and efficiently compute the maximum flow of composite paths generated. Numerical examples illustrate the method.

• Composites Research
• /
• 제12권6호
• /
• pp.31-42
• /
• 1999

항공우주산업에서 무게를 증가시키지 않고 비행구조물의 구조적 성능을 증가시키는 것은 굉장한 잇점을 갖는다. 본 연구에서는 복합재료 평판의 무게를 증가시키지 않고 좌굴하중과 인장 파단하중을 동시에 증가시키는 혁신적인 설계 방법에 대해서 연구하였다. 원공이 있는 복합재료 적층판에서 곡선 섬유층과 직선 섬유층을 조합하여 적층판을 구성할 때 좌굴하중과 인장파단 하중이 동시에 증가되는 현상에 대하여 유한요소 해석을 사용하여 알아보았다. 원공의 크기와 적층 순서를 달리하면서 곡선섬유를 이용한 효과가 얼마나 되는지 알아보았다. 또한, 각각의 경우에 대해서 파단이 어떻게 일어나는가도 관찰하였다. 곡선섬유 평판을 제작하기 위해서는 연속적이고 부드럽게 변하는 fiber path가 필요하다. 여기서는 유한요소로 구한 섬유 방향을 사용하여 제작이 가능한 부드럽게 이어지는 fiber path를 구하는 간단한 방안을 제시하였다.

• Design & Manufacturing
• /
• 제6권1호
• /
• pp.95-100
• /
• 2012

In this study, a novel Cu composite sheet with embedded high electric conduction path was developed as another alternative for the interconnect materials possessing high electrical conductivity as well as high strength. The Cu composite sheet was fabricated by forming Ag conduction paths not within the interior but on the surface of a high strength Cu substrate by damascene electroplating process. As a result, the electrical conductivity increased by 40% thanks to mesh type Ag conduction paths, while the ultimate tensile strength decreased by 20%. The interfacial fracture resistance of Cu composite sheet prepared by damascene electroplating increased by above 50 times compared to Cu composite sheet by conventional electroplating. For feasibility test for practical application, a leadframe for LED module was manufactured by a progressive blanking and piercing processes, and the blanked surface profile was evaluated as a function of the volume fraction of Ag conduction paths. As Ag conduction path became finer, pressing formability improved.

• Earthquakes and Structures
• /
• 제1권1호
• /
• pp.21-41
• /
• 2010

Multi-span steel-concrete composite (SCC) bridges are very sensitive to earthquake loading. Extensive damage may occur not only in the substructures (piers), which are expected to yield, but also in the other components (e.g., deck, abutments) involved in carrying the seismic loads. Current seismic codes allow the design of regular bridges by means of linear elastic analysis based on inelastic design spectra. In bridges with superstructure transverse motion restrained at the abutments, a dual load path behavior is observed. The sequential yielding of the piers can lead to a substantial change in the stiffness distribution. Thus, force distributions and displacement demand can significantly differ from linear elastic analysis predictions. The objectives of this study are assessing the influence of piers-deck stiffness ratio and of soil-structure interaction effects on the seismic behavior of continuous SCC bridges with dual load path, and evaluating the suitability of linear elastic analysis in predicting the actual seismic behavior of these bridges. Parametric analysis results are presented and discussed for a common bridge typology. The response dependence on the parameters is studied by nonlinear multi-record incremental dynamic analysis (IDA). Comparisons are made with linear time history analysis results. The results presented suggest that simplified linear elastic analysis based on inelastic design spectra could produce very inaccurate estimates of the structural behavior of SCC bridges with dual load path.

• 한국강구조학회 논문집
• /
• 제13권6호
• /
• pp.661-672
• /
• 2001

본 연구는 Arc-length method를 이용한 복합재료 공간 구조물의 대변형 거동의 관찰에 관한 것이다. 비선형 평형경로의 각각의 하중단계에서 자동적으로 Arc-length 크기를 변화시켜 하중-변위 관계곡선을 추적할 수 있도록 하였다. 복합재료 공간 트러스의 점탄성 해석은 quasi-elastic 방법을 사용해 탄성해를 구하였다. Micro Mechanical Materials Modeling 방법을 사용하여 탄성계수를 결정하였고 하중조합에 따른 비선형 하중-변위 곡선을 추적하였다. 본 연구의 효과를 검증하기 위하여 그물형 공간 트러스를 다른 방법의 결과들과 비교하였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.179-182
• /
• 2003

This research aims to establish an optimal design method of filament wound structures. So far, most design and manufacturing of filament wound structures have been based on manufacturing experiences, and there is no established design rule. In this research, possible winding patterns considering the windability and the slippage between fiber and mandrel surface were calculated using the semi-geodesic path algorithm. In addition, finite element analyses using a commercial code, ABAQUS, were performed to predict the behavior of filament wound structures. On the basis of the semi-geodesic path algorithm and the finite element analysis method, filament wound structures were designed using the genetic algorithm.

• Steel and Composite Structures
• /
• 제16권4호
• /
• pp.375-387
• /
• 2014

The purpose of this paper is to propose a method for evaluation of varying stiffness coefficients of tailored conical shells (TCS). Furthermore, a comparison between buckling loads of these shells under axial load with the different fiber path is performed. A circular truncated conical shell subjected to axial compression is taken into account. Three different theoretical path containing geodesic path, constant curvature path and constant angle path has been considered to describe the angle variation along the cone length, along cone generator of a conical shell are offered. In the TCS with the arbitrary fiber path, the thickness and the ply orientation are assumed to be functions of the shell coordinates and influencing stiffness coefficients of the structure. The stiffness coefficients and the buckling loads of shells are calculated basing on classical shells theory (CST) and using finite-element analysis (FEA) software. The obtained results for TCS with arbitrary fiber path, thickness and ply orientation are derived as functions of shell longitudinal coordinate and influencing stiffness coefficients of structures. Furthermore, the buckling loads based on fiber path and ply orientation at the start of tailored fiber get to be different. The extent of difference for tailored fiber with start angle lower than 20 degrees is not significant. The results in this paper show that using tailored fiber placement could be applied for producing conical shells in order to have greater buckling strengths and lower weight. This work demonstrates the use of fiber path definitions for calculated stiffness coefficients and buckling loads of conical shells.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.211-214
• /
• 2000

Filament wound pressure vessels have been studied for the efficient design tool to consider the variation of fiber angles through-the thickness direction. Filament winding patterns were simulated from semi-geodesic fiber path equation to calculate fiber path on arbitrary surface. Finite element analyses were performed considering fiber angle variation in longitudinal and thickness directions by ABAQUS. For the finite element modeling of the pressure tank, the 3-dimensional layered solid element was utilized. From the stress results of pressure tanks, maximum stress criterion in transverse direction was applied to modify material properties for failed region. In the end of each load increment, resultant layer stresses were compared with a failure criterion and properties were reduced to 1/10 for a failed layer. Results of progressive failure analysis were compared with two experimental data.

• 대한기계학회논문집
• /
• 제18권9호
• /
• pp.2374-2385
• /
• 1994

SiCw/Al composite material is especially attractive because of their superior specific strength, specific stiffness, corrosion fatigue resistance, creep resistance, and wear resistance compared with the corresponding wrought Al alloy. In this study, Fatigue crack growth behavior and fatigue crack path morphology(FCPM) of SiC whisker reinforced Al 6061 alloy with 25% SiC volume fraction and Al 6061 allay were performed. Result of the fatigue crack growth test sgiwed that fatigue crack growth rate of SiCw/Al 6061 composite was slower than that of Al 6061 matrix therefore it was confirmed that Sic whisker have a excellent fatigue resistance. And Al 6061 matrix had only FCPM perpendicular to loading direction. On the other hand SiCw/Al 6061 composite had three types in fatigue crack path morphology. First type is that both sides FCPM of artificial notch are perpendicular to loading direction. Second type is that a FCPM in artifical notch has slant angle to loading direction and the other side FCPM is perpendicular to loading direction. Third type is that both sides FCPM of notch have slant angle to loading direction. It was considered that this kinds of phenomena were due to non-uniform distribution of SiC whisker and confirmed by SEM observation for fracture mechanism study.

• Communications for Statistical Applications and Methods
• /
• 제13권3호
• /
• pp.577-585
• /
• 2006

This paper presents a method for reliability evaluation of a telecommunication network with variable link-capacities when the simple paths of the network are known. The LP-EM, suggested by Lee and Park (2001), identifies a composite path as a subnetwork and adds only a minimal set of links at each step which gives maximal increase on the maximum capacity flow of the subnetwork. Thereby the LP-EM reduces the possible occurrence of redundant composite paths significantly over other existing methods. Based on the LP-EM, our method further reduces the possible redundancy by identifying such simple paths that could give no increase of maximum capacity flow on the current subnetwork and excluding those simple paths from consideration in the process of constructing composite paths.