• Corrosion Science and Technology
• /
• 제14권1호
• /
• pp.12-18
• /
• 2015

Since the operation period of nuclear power plants has increased, the degradation of buried pipes gradually increases and recently it seems to be one of the emerging issues. Maintenance on buried pipes needs high quality of management system because outer surface of buried pipe contacts the various soils but inner surface reacts with various electrolytes of fluid. In the USA, USNRC and EPRI have tried to manage the degradation of buried pipes. However, there is little knowledge about the inspection procedure, test and manage program in the domestic nuclear power plants. This paper focuses on the development and build-up of real-time monitoring and control system of buried pipes. Pipes to be tested are tape-coated carbon steel pipe for primary component cooling water system, asphalt-coated cast iron pipe for fire protection system, and pre-stressed concrete cylinder pipe for sea water cooling system. A control system for cathodic protection was installed on each test pipe which has been monitored and controlled. For the calculation of protection range and optimization, computer simulation was performed using COMSOL Multiphysics (Altsoft co.).

• 대한화학회지
• /
• 제59권5호
• /
• pp.413-422
• /
• 2015

연료전지는 수소와 산소를 연료로 하여 전기를 생산해 내는 장치로, 전기분해에 의해 음극에서 생성된 수소이온을 양극으로 전달할 수 있는 전해질을 필요로 한다. 전해질로써 Nafion과 같은 불소계 고체 고분자 막이 개발되어 왔으나, 고온에서의 수소이온 전도도 감소 및 높은 함수율에 따른 안정성 감소 등의 문제로 인해 새로운 연료전지용 고분자 전해질 막의 개발을 필요로 하였다. 본 연구에서는 술폰산기가 밀집된 구조를 갖는 단량체를 이용함으로써 높은 수소이온 전도도를 확보하고 이에 따른 고분자 막의 높은 함수율은 고분자 사슬 내에 나이트릴(CN) 작용기를 친수성 올리고머에 함께 도입함으로써 고분자 사슬간 쌍극자-쌍극자 상호작용을 통해 극복할 수 있도록 하였다. 결과적으로 물리적 가교가 형성된 고분자 막들은 높은 함수율 대비 우수한 치수안정성을 나타내었으며, 모든 조성에서 Nafion-117 고분자막에 비해 낮은 IEC값을 가짐에도 불구하고 보다 높은 전도도를 나타내었다.

• 한국병원경영학회지
• /
• 제5권1호
• /
• pp.1-23
• /
• 2000

This study was undertaken to develop performance measurement indicators in S Hospital, which is the largest component of Y Medical Center which implemented the Responsible Management System in 1993. To begin, strategic initiatives for S Hospital were reestablished based on Y Medical Center's goals and objectives. The BSC(Balanced Scorecard) was used to develop performance measurement indicators after validity checks by specialists. The results were that total 16 indicators were developed to measure performance for strategic initiatives. Those included the growth rate of patient revenues, operating profit to gross revenues, reduction rate in administrative expenses from a financial perspective; average medical expenses per adjusted patient, patient satisfaction survey for inpatients and outpatients and emergency room patients, return rate for treatment results from the customer's perspective; reduction rate in average length of hospital stay, expenses for lost cases of medical disputes, rate for contracted employees, the number of published reports per faculty member from an internal perspective; educational expenses for training medical staff and full time employees, adjusted patient per medical staff, and the number of cases implemented which were proposed by employees. Any organization needs to have its own explicit objectives to grow and develop and it is absolutely necessary to measure performance to accomplish them. The performance measurement indicators developed by this study are expected to be used as a tool to attain the objectives of S Hospital.

• 항공우주기술
• /
• 제11권2호
• /
• pp.1-11
• /
• 2012

본 논문은 우주용 X-대역 능동 위상 배열 레이더를 위한 T/R 모듈에 대하여 기술한다. T/R 모듈은 위상 배열 안테나의 전자적 빔 조향을 가능하게 하는 송수신 RF 반도체 소자가 집적된 모듈이며 SAR 탑재체의 핵심 부품이다. 기존의 T/R 모듈은 수평 편파 또는 수직 편파 신호를 스위치에 의해 선택적으로 수신할 수 있었다. 그러나 현재 기술적 흐름은 수평 편파와 수직 편파 신호를 동시에 수신하는 것이다. 따라서 이중 편파 동시 수신 T/R 모듈에 대한 개발이 활발히 이루어지고 있다. 본 연구는 차세대 SAR 탑재체를 위한 선행 연구로서 능동 위상 배열 레이더 T/R 모듈의 기술 개발 동향과 이중 수신 T/R 모듈의 예비 설계 결과를 정리하였다.

• Child Health Nursing Research
• /
• 제9권3호
• /
• pp.294-300
• /
• 2003

Purpose: The purpose of the study was to investigate the status of visual health behavior of school-age children and to identify the predicting variables of the school-age children's visual health behavior. Method: The subject was 764 children in grades 4 to 6, enrolled in 2 elementary schools located in urban area. The data were analyzed using t-test, ANOVA, correlation analysis, and stepwise multiple regression. Result: The findings were as follows: 1. The mean of the score of the visual health behavior of school-age children was 41.59(SD=7.22) and there was a significant difference according to grade. 2. There were significant correlations between visual health behavior and self-efficacy for visual health behavior (r=.51, p=.000), motivation for visual health(r=.45, p=.000), perceived benefits(r= .34, p=.000), self-concept(r=.32, p=.000), knowledge of visual health(r=.30, p=.000), health perception for vision(r=.16, p=.000), health locus of control(r=.11, p=.002), and perceived barriers(r=.-.12, p=.000). 3. Self-efficacy for visual health behaviors, knowledge of visual health, motivation for visual health, self-concept, health perception for vision, and perceived benefits were identified as predictor variables of the visual health behavior of the school-age children from the stepwise multiple regression analysis. The total percent of variance accounted by these 6 variables were 36.9％. Conclusion: From the result, it is suggested that the development of comprehensive visual health education program including the component of self-efficacy, health motivation and self-concept to promote the visual health of school-age children.

• 한국해양공학회지
• /
• 제24권6호
• /
• pp.71-75
• /
• 2010

Although Graphite Compacted Vermicular (GCV) was first observed in 1948, the narrow range for stable foundry production precluded the high volume application of GCV to complex components such as cylinder blocks and heads until advanced process control technologies became available. This, in turn, had to await the advent of modern measurement electronics and computer processors. Following the development of foundry techniques and manufacturing solutions, primarily initiated in Europe during the 1990s, the first series production of GCV cylinder blocks began during 1999. Today, more than 40,000 GCV cylinder blocks are produced each month for OEMs, including Audi, DAF, Ford, Hundai, MAN, Mercedes, PSA, Volkswagen, and Volvo. Given that new engine programs are typically intended to support three to four vehicle generations, the chosen engine materials must satisfy current design criteria and also provide the potential for future performance upgrades without changing the overall block architecture. With at least a 75% increase in the ultimate tensile strength, a 40% increase in the elastic modulus, and approximately double the fatigue strength of either iron or aluminum, GCV is ideally suited to meet current and future of engine design and performance requirements.

• Korean Chemical Engineering Research
• /
• 제48권4호
• /
• pp.413-416
• /
• 2010

본 연구에서는 연근의 추출물에서 기능성화장품 소재를 개발하고자 하였다. 용매는 70~100%의 에탄올을 이용하였으며, 연근의 유효성분으로 nuciferine을 확인하였다. 연근 추출물의 화장품소재로서의 응용가능성을 보기 위해 안전성시험(MTT assay), 주름개선 효과시험(Elastase 활성저해 시험) 및 항산화효과시험(DPPH free radical scavenging assay)을 실시하였다. 100% 에탄올로 연근을 추출할 경우 $100{\mu}g/ml$의 농도에서 세포생존율이 80% 이상이어서 연근 추출물은 화장품소재로서 비교적 안전함을 알 수 있었다. 또한 연근 추출물은 $100{\mu}g/ml$의 농도에서 elastase 활성억제가 40~50%를 보여주어서 비교적 우수한 주름개선 효과를 나타내었다. 50% 항산화 저해능을 보이는 농도($FSC_{50}$)는 $5.0{\sim}38{\mu}g/ml$로 연근 추출물의 항산화효과가 매우 우수하였다. 따라서 연근 에탄올추출물은 주름개선 기능성화장품 소재로서 그 가능성이 높음을 알 수 있었다.

• 한국지능시스템학회논문지
• /
• 제15권6호
• /
• pp.742-747
• /
• 2005

웹 애플리케이션의 복잡도가 증가하면서, 요구조건이 다양한 상황에서 웹 애플리케이션을 보다 빠르고 쉽게 개발하기 위한 해결책으로 Cocoon, Struts, JSF 같은 프레임워크를 이용하는 방안들이 최근 보편화되고 있다. 그러나, 초보자는 XML을 사용하여 아파치 Cocoon 사이트맵 파일을 작성하기 어렵다. 본 논문에서는 초보자들이 Cocoon 사이트맵 파일을 쉽게 작성할수 있도록 지원하는 Java 서블릿 엔진에서 운영되는 Cocoon 사이트맵 편집기를 구현한다. 이 시스템은 세부분, 즉 사이트맵 메인 편집기, 파이프라인 뷰어, 그리고 사이트맵 트레이서로 구성된다. 사이트맵 메인 편집기는 사용자들이 Cocoon 애플리케이션을 위한 컴포넌트 파이프라인, 제너레이터, 그리고 다른 환경설정 정보를 정의하는 XML 문서를 작성할 수 있도록 지원한다. 파이프라인 뷰어는 Cocoon 컴포넌트 파이프라인들의 구조를 그래픽 인터페이스를 통해 파악할 수 있도록 지원한다. 사이트맵 트레이서는 사이트맵 파일에 정의된 Cocoon 파이프라인을 따라 흐르는 SAX 이벤트들을 모니터링 하는 기능들을 제공한다.

• 한국식품영양과학회지
• /
• 제28권5호
• /
• pp.1034-1043
• /
• 1999

Rheological properties of dough made from waxy barley(Iri28) flour wheat flour mixtures with additives were investigated for the preparation of waxy barley bread using farinograph, extensograph and amy lograph. The water absorption, development time and dough weakness increased as the waxy barley flour level increased in all blends; however, dough stability decreased. Farinogram properties of 10% waxy barley flour added mixture were similar to those of 100% wheat flour. The addition of A.A(ascorbic acid), gluten, HPMC(hydroxy propyl methyl cellulose) improved rheological properties of dough with 30% waxy barley flour added mixture. In particular, stability and weakness of the dough showed greater dough improving effect by addition of A.A. For the extensograph data, strength, resistance and extensibility of dough decreased with increasing level of waxy barley flour. With the addition of additives, extensogram properties were variable for 30% waxy barley flour mixture. Of these additives, gluten had highest value in strength of dough. Addition of A.A and HPMC to 30% waxy barley flour added mixture resulted in an increase in the resistance and a decrease in the extensibility. Waxy barley flour added mixtures showed little higher gelatinization temperature on amylograph data than control. Maximum viscosity reduced as the waxy barley flour level increased. Also 30% waxy barley flour added mixture containing A.A and HPMC showed a decrease in maximum viscosity. But addition of gluten to 30% waxy barley flour mixture resulted an increase in the maximum viscosity. All of 30% waxy barley flour added mixture with additives had lower gelatinization temperature than those without additives. In the SEM images, starch granules were dispersed in a protein matrix. A non continuous, loose protein starch matrix was observed in all waxy barley flour mixture by SEM. Addition of additives gave the dough a more continuous structure with interactions between the starch granule and protein component.

• 대한간호학회지
• /
• 제34권8호
• /
• pp.1434-1442
• /
• 2004

Purpose. Professional nursing ethics is a living, dynamic set of standards for nurses' professional moral behavior. Furthermore, in daily clinical nursing training, nursing students are constantly confronted with decision-making that is moral in nature. The aim of this study was to identify the perceived ethical attitudes in the clinical training process of senior nursing students using Q-methodology to offer basic strategies for nursing ethics education and thereby improve patients' care. Methods. Q-methodology provides a scientific method for identifying perception structures that exist within certain individuals or groups. Thirty-seven participants in a university rated 38 selected Q-statements on a scale of 1-9. The collected data were analyzed using pc-QUNAL software. Results. Principal component analysis identified 3 types of ethical attitudes in nursing students in Korea. The categories were labeled Sacred-life, Science-realistic and Humane-life. Sacred-life individuals think that a life belongs to an absolute power (God), not a man, and a human life is a high and noble thing. Science-realistic individuals disagreed that allowing an induced abortion or embryo (human) duplication is unethical behavior that provokes a trend, which takes the value of a life lightly; most of them took a utilitarian position with respect to ethical decisions. Humane-life individuals exhibit a tendency toward human-centered thought with respect to ethical attitudes. Conclusion. This study will be of interest to educators of students of nursing and hospital nursing administrators. Also, the findings may provide the basis for the development of more appropriate strategies to improve nursing ethics education programs.