• Journal of KIISE:Software and Applications
• /
• v.33 no.6
• /
• pp.550-563
• /
• 2006

Software product line engineering is a method that prepares for the future reuse and supports to seamless reuse in application development process. Commonality and variability play central roles in all product line development processes. Reusable assets will become core assets by explicitly representing C&V. Indeed, the variabilities that art identified at each phase of core assets development have different levels of abstraction. In the past, these variabilities have been handled in an implicit manner and without distinguishing the characteristics of each core assets. In addition, previous approaches have depended on the experience and intuition of a domain expert to recognize commonality and variability. In this paper, we suggest a 2-dimensional analyzing method that analyzes the variabilities of core assets in software product line. In horizontal analysis process, the variation types are analyzed in requirements, architecture, and component that are produced at each phase of development process. In vertical analysis process, variations are analyzed in different abstract levels, in which the region of commonality is identified and the variation points are refined. By this method, the traceability of variations between core assets will be possible and core assets can be reused seamlessly.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.26 no.3
• /
• pp.279-287
• /
• 1993

Daily variation of particulate organic carbon(POC) and some factors controlling its level were examined for a semi-enclosed bay(Wonmun Bay, south coast of Korea), in which a lot of suspended oyster culture farms existed, in September, 1992. Observations were made at hourly interval. In spite of the relatively short survey period, strong short-term variation of POC concentration could be observed. Concentrations of POC were the range of $58{\sim}582{\mu}g/l(average 272{\mu}g/l)$ and their variation pattern was similar to those of chlorophyll a with the range of $0.90{\sim}7.25{\mu}g/l(average 3.35{\mu}g/l)$. The low C/N ratios also suggested that marine microalgae was a major component of POC for Wonmun Bay. Primary production, average $1.97\;gC/m^2/day$, was the main source of POC beacuse the supply of POC via freshwater input and exchange with the outer part of the bay was little. Oyster population also excreted a small amount of POC. About $40\%$ of produced POC was decomposed heterotrophically. Another important cause for the fluctuation of observed POC was tidal cycle. Considerable POC, which amounted $37\%$ of produced POC, was lost from the bay due to flushing by tidal cycle. It was also calculated that about $16\%$ was transported onto the sediment. It seemed that a part of POC was consumed by oyster and other heterotrophs.

• Journal of Radiation Protection and Research
• /
• v.45 no.4
• /
• pp.178-186
• /
• 2020

Background: Reactor pressure vessel (RV) with internals (RVI) are activated structures by neutron irradiation and volume contaminated wastes. Thus, to develop safe and optimized disposal plan for them at a disposal site, it is important to perform exact activation calculation and evaluate the dose rate on the surface of casks which contain cut-off pieces. Materials and Methods: RV and RVI are subjected to neutron activation calculation via Monte Carlo methodology with MCNP6 and ORIGEN-S program-neutron flux, isotopic specific activity, and gamma spectrum calculation on each component of RV and RVI, and dose rate evaluation with MCNP6. Results and Discussion: Through neutron activation analysis, dose rate is evaluated for the casks containing cut-off pieces produced from decommissioned RV and RVI. For RV cut-off ones, the highest value of dose rate on the surface of cask is 6.97 × 10-1 mSv/hr and 2 m from it is 3.03 × 10-2 mSv/hr. For RVI cut-off ones, on the surface of it is 0.166 × 10-1 mSv/hr and 2 m from it is 1.04 × 10-1 mSv/hr. Dose rates for various RV and RVI cut-off pieces distributed lower than the limit except the one of 2 m from the cask surface of RVI. It needs to adjust contents in cask which carries highly radioactive components in order to decrease thickness of cask. Conclusion: Two types of casks are considered in this paper: box type for very-low-level waste (VLLW) as well as low-level waste (LLW) and cylinder type for intermediate-level waste (ILW). The results will contribute to the development of optimal loading plans for RV and RVI cut-off pieces during the decommissioning of nuclear power plant that can be used to prepare radioactive waste disposal plans for the different types of wastes-ILW, LLW, and VLLW.

• Geophysics and Geophysical Exploration
• /
• v.25 no.1
• /
• pp.26-37
• /
• 2022

Recently, multiple methods using small aircraft for geophysical exploration have been suggested as a result of the development of information and communication technology. In this study, we introduce the hybrid unmanned aircraft electromagnetic system of the Korea Institute of Geosciences and Mineral resources, which is under development. Additionally, data processing and interpretation methods are suggested via the analysis of datasets obtained using the system under development to verify the system. Because the system uses a three-component receiver hanging from a drone, the effects of rotation on the obtained data are significant and were therefore corrected using a rotation matrix. During the survey, the heights of the source and the receiver and their offsets vary in real time and the measured data are contaminated with noise. The noise makes it difficult to interpret the data using the conventional method. Therefore, we developed a recurrent neural network (RNN) model to enable rapid predictions of the apparent resistivity using magnetic field data. Field data noise is included in the training datasets of the RNN model to improve its performance on noise-contaminated field data. Compared with the results of the electrical resistivity survey, the trained RNN model predicted similar apparent resistivities for the test field dataset.

• International Journal of Computer Science & Network Security
• /
• v.22 no.10
• /
• pp.183-190
• /
• 2022

The article analyzes the features of the formation of a person's value attitude to the worldview by means of information technologies. The present considers it necessary to form a person's value attitude to the perception of the world by means of information technologies. The explosive development of information and telecommunications technologies has become a determining factor in the development of modern society, which is called the information or Global Information Society. It is not yet fully formed, and we are all participants in the development of the Global Information Society. The article considers the basics of a harmonious worldview of a person, which is the basis for the formation of outlook ideas, views, knowledge, beliefs about the surrounding world, which determine the place and role and motivate actions in relation to the surrounding reality through the prism of value orientations. Worldview is considered as an integrity of relatively stable schemes, behaviors, feelings, thinking, vision of the surrounding world, inherent in an individual child, ethno-cultural and socio-cultural groups. The concept of "worldview" as a component of the multi-level structure of the individual's outlook is defined. The features that characterize a person's perception of the world are revealed. The main educational value of information technologies in the formation of a person's value attitude to the perception of the world is highlighted, which consists in the fact that they allow you to create an immeasurable brighter multi-sensory interactive learning environment with almost unlimited potential opportunities that fall at the disposal of both the teacher and the student. The trend of forming a person's value attitude to the perception of the world is clearly developing in the direction of mixed learning as a process that creates a comfortable information educational environment, communication systems that provide all the necessary educational information. The approach to student development by means of the educational environment and the formation, while in the person of a value attitude to the perception of the world by means of Information Technologies, has many pedagogical advantages, which is considered in the article.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.6
• /
• pp.185-190
• /
• 2023

Recently, tracking radar requires the development of millimeter wave tracking radar to acquire target information with high resolution in various environments. The development of millimeter wave tracking radar requires the development of transmission and receiving components that can be applied to the millimeter wave tracking radar, as well as verification of the applicability of the tracking radar. In order to verify the applicability of the developed transmitting and receiving components, it is necessary to develop a signal acquisition device that can control the transmitting and receiving components using the operating concept of a tracking radar and check the status of the received signal. In this paper, we implemented a signal acquisition device that can confirm the applicability of components developed for millimeter wave tracking radar. The signal acquisition device was designed to process in real time the OOOMHz center frequency and OOMHz bandwidth signals input from 4 channels to verify the received signal. In addition, component control applying the tracking radar operation concept was designed to be controlled by communication such as RS422, RS232, and SPI and generation of control signals for the transmission and receiving time. Lastly, the implemented signal acquisition device was verified through a signal acquisition device performance test.

• Journal of Korean Society of Forest Science
• /
• v.77 no.4
• /
• pp.429-444
• /
• 1988

Considering the recent trent toward the development of multiple-use of forest trees, investigations for comprehensive information on these young stands of Hinoki cypress are necessary for rational forest management. From this point of view, 83 sample trees were selected and cut down from 23-ear old stands of Hinoki cypress at Changsung-gun, Chonnam-do. Various stem growth factors of felled trees were measured and canonical correlaton analysis, principal component analysis and factor analysis were applied to investigate the stem growth characteristics, relationships among stem growth factors, and to get potential information and comprehensive information. The results are as follows ; Canonical correlation coefficient between stem volume and quality growth factor was 0.9877. Coefficient of canonical variates showed that DBH among diameter growth factors and height among height growth factors had important effects on stem volume. From the analysis of relationship between stem-volume and canonical variates, which were linearly combined DBH with height as one set, DBH had greater influence on volume growth than height. The 1st-2nd principal components here adopted to fit the effective value of 85% from the pincipal component analysis for 12 stem growth factors. The result showed that the 1st-2nd principal component had cumulative contribution rate of 88.10%. The 1st and the 2nd principal components were interpreted as "size factor" and "shape factor", respectively. From summed proportion of the efficient principal component fur each variate, information of variates except crown diameter, clear length and form height explained more than 87%. Two common factors were set by the eigen value obtained from SMC (squared multiple correlation) of diagonal elements of canonical matrix. There were 2 latent factors, $f_1$ and $f_2$. The former way interpreted as nature of diameter growth system. In inherent phenomenon of 12 growth factor, communalities except clear length and crown diameter had great explanatory poorer of 78.62-98.30%. Eighty three sample trees could he classified into 5 stem types as follows ; medium type within a radius of ${\pm}1$ standard deviation of factor scores, uniformity type in diameter and height growth in the 1st quadrant, slim type in the 2nd quadrant, dwarfish type in the 3rd quadrant, and fall-holed type in the 4 th quadrant.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.4 no.3
• /
• pp.41-50
• /
• 2001

Recently our nature of environment has destroyed by a large scaled forest fire. In order to manage these forest fires, forecasting of it is considered as the most important thing. In this paper the database related to forest fire was first built and the efficient forest fire information management system was implemented by using GIS. The main goal of this system is that forest fire managers have GUI(graphic user interface) to analyze data of forest fire effectively and update and retrieve information in database. For the efficient GUI, this system is built in Visual Basic 6.0 and Map Object 2.0. Map Object 2.0 is combined to have various and powerful functionality of GIS analysis as component ware. The Oracle 8.0 is used as DBMS in this study to manage all the spatial and attributed information in database effectively. In the future, this system will play a critical role as making a decision supporting system for scientific forest fire protection and help real time forest fire hazard information offers service for public welfare administration business management.

• The Korea Journal of Herbology
• /
• v.29 no.6
• /
• pp.63-71
• /
• 2014

Objectives : Lonicerae japonicae Flos(LJF) has been reported to exhibit anti-oxidant, anti-inflammatory, anti-viral, anti-rheumatoid properties. However, it is still largely unknown whether LJF inhibits the ultraviolet(UV)B-induced oxidative damage in human HaCaT keratinocytes. Therefore in this paper, we investigated the anti-oxidative capacity and protective effect of LJF against UVB-induced oxidative demage in human HaCaT keratinocytes. Methods : To evaluate the anti-oxidative activity of LJF extracts, we measured total phenolic contents, total flavonoid contents, antioxidant capacity, and superoxide scavenging activity. To give an oxidative stress to HaCaT cells, UVB was irradiated with $200mJ/cm^2$ to HaCaT cells. To detect the protective effect of LJF against UVB, we measured cell viability, DNA fragmentation and reactive oxygen species (ROS) production. In addition, we performed high-performance liquid chromatography (HPLC) analysis to find a major component of LJF. Results : LJF contained phenolic and flavonoid contents, and showed the anti-oxidant and superoxide scavenging activity. The UVB-induced oxidative conditions led to the cell death, DNA fragmentation and reactive oxygen species (ROS) production. However, pretreatment with LJF reduced oxidative conditions, including inhibition of cell death, DNA fragmentation and ROS production. In addition, we found out chlorogenic acid as major component of LJF. Conclusions : These results could suggest that LJF contained anti-oxidative contents and exhibited protective effects against UVB on human HaCaT keratinocytes. And the effective compound of LJF which could show protective activities against UVB is chlorogenic acid. Thus, LJF and chlorogenic acid would be useful for the development of drug or cosmetics treating skin troubles.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.8
• /
• pp.781-788
• /
• 2013

Predicting the engine component temperature is a basic step to conduct structural safety evaluation in medium-speed diesel engine design. Recent trends such as increasing power density and performance necessitate more effective thermal management of the engine for achieving the desired durability and reliability. In addition, the local temperatures of several engine components must be maintained in the proper range to avoid problems such as low- or high-temperature corrosion. Therefore, it is very important to predict the temperature distribution of each engine part accurately in the design stage. In this study, the temperature of an engine component is calculated by using steady-state conjugate heat transfer analysis. A proper approach to determine the thermal load distribution on the thermal boundary area is suggested by using 1D engine system analysis, 3D transient CFD results, and previous experimental data from another developed engine model. A Hyundai HiMSEN engine having 250-mm bore size was chosen to validate the analysis procedure. The predicted results showed a reasonable agreement with experimental results.