• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.118-121
• /
• 2007

In recent years, the hyperspectral instruments with high spatial and high spectral resolution have become an important component of wide variety of earth science applications. The primary mission of the proposed Compact Airborne Imaging Spectrometer System (CAISS) in this study is to acquire and provide full contiguous spectral information with high quality spectral and spatial resolution for advanced applications in the field of remote sensing. The CAISS will also be used as the vicarious calibration equipment for the cross-calibration of satellite image data. The CAISS consists of six physical units: the camera system, the Jig, the GPS/INS, the gyro-stabilized mount, the operating system, and the power inverter and distributor. Additionally, the calibration instruments such as the integrated sphere and spectral lamps are also prepared for the radiometric and spectral calibration of the CAISS. The CAISS will provide high quality calibrated image data that can support evaluation of satellite application products. This paper summarizes the design, development and major characteristic of the CAISS.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.8
• /
• pp.156-164
• /
• 1998

IMS is a more advanced manufacturing system than FMS. However, IMS do not have sufficient performance for the work in the various and uncertain environment, because of the difficulty of the work and occurrence of the unexpected condition. If IMS is hard to work properly, teleoperation system can support it by using the human's consideration and judgment. The master mechanism is a basic component of the teleoperation system and the development of the useful one is important for efficiency of the work. A master mechanism of exoskeleton type can increase the work efficiency, mobility and harmony between a working robot and an operator. This paper describes an arm-harness of exoskeleton type, which is able to drive a robot according to judgment. This device is applied to a robot system for evaluating the system performance through the experiment.

• The Plant Pathology Journal
• /
• v.31 no.2
• /
• pp.186-191
• /
• 2015

Diatoms are a major component of the biological community, serving as the principal primary producers in the food web and sustaining oxygen levels in aquatic environments. Among marine planktonic diatoms, the cosmopolitan Skeletonema costatum is one of the most abundant and widespread species in the world's oceans. Here, we report the basic characteristics of a new diatom-infecting S. costatum virus (ScosV) isolated from Jaran Bay, Korea, in June 2008. ScosV is a polyhedral virus (45-50 nm in diameter) that propagates in the cytoplasm of host cells and causes lysis of S. costatum cultures. The infectivity of ScosV was determined to be strain- rather than species-specific, similar to other algal viruses. The burst size and latent period were roughly estimated at 90-250 infectious units/cell and <48 h, respectively.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.119-122
• /
• 2002

Collimators were mostly produced by handwork and semi-automatic system in some companies. Under this situation, automatic manufacturing system for optical collimators is on the rise most essential technique in the development of optical communication components. In this study, automatic manufacturing system was designed and constructed to develop optical collimators with high functionality. Also optical collimators were manufactured using a developed automatic system. We have compared collimators made by automatic system and handwork fer performance test with a measured values of angle alignment, beam size and TIL. As a result, it brought a reduction of the tact time fur manufacturing and improvement of an efficiency of optical collimators, and then it was found that automatic system was indispensable for materialization of optical collimators with high functionality.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 2002.07a
• /
• pp.97-102
• /
• 2002

Life Science Research Center of SK Chemicals has developed a 3rd-generation anticancer platinum drug for the first time in the nation′s 100-year-old pharmaceutical industry. The Korea Food and Drug Administration (KFDA) approved the sale of "Sunpla" (code name SKI 2053R, general name : Heptaplatin) on July 14, 1999 for the treatment of advance, metastatic gastric cancer. Cisplatin, the 1 st-generation anticancer drug, which was developed by Bristol-Myers of the United States in 1976, is one of the most potent anticancer drugs and is a major component of combination chemotherapy for a variety of human cancers. However its clinical usefulness has frequently been limited not only by undesirable side effects such as severe renal toxicity, nausea, vomiting, ototoxicity, and neurotoxicity but also by the development of resistance. Carboplatin, the 2nd-generation anticancer platinum drug, which was also developed by Bristol-Myers in 1986, has modified the problems of the renal and gastrointestinal toxicities of cisplatin. Carboplatin, however, has no enhanced therapeutic efficacy over cisplatin and does not possess the property to overcome cross-resistance to cisplatin.

• Proceedings of the KWS Conference
• /
• 2003.05a
• /
• pp.216-218
• /
• 2003

A fracture mechanics analysis methodology for stress corrosion cracks (SCCs) existing in the Alloy 600 nozzle weld joint for control rod drive mechanisms (CRDMs) of pressurized water reactor is studied. Effects of weld residual stresses on the sub-critical crack behavior during the reactor operation are investigated by a fracture mechanics analysis, which is combined with the finite element alternating method. It is found that effects f the residual stresses on the stress intensity factor (SIF) and crack growth rate (CGR) are dominant and values of SIF and CGR of cracks in the region of weld joint are increased by a factor of three or more on an average.

• Journal of Engineering Education Research
• /
• v.6 no.1
• /
• pp.32-41
• /
• 2003

This paper presents web-based contents for studying differential equations. The component-based software development techniques have been used to develop Java Bean components which are simple and convenient for learners. The components have been used to make the contents for the differential equations. The contents have high interactive capability, which gives much interest to learners. The learners can easily understand the mathematical concept by repeating the solving procedure.

• Journal of the Korean Society of Industry Convergence
• /
• v.11 no.3
• /
• pp.135-140
• /
• 2008

This paper researched about Development Cutting Tool User Defined Module Based(PMCUDMS) on Simulation that was able to adapt themselves to rapid development of software and hardware to adopt. It is basic research that develops a scheme whereby technic make property. This paper theorized about to realize Cutting Tool User Defined Module Based on Simulation which is developing CNC Software flows from building Windows XP operating system's image that is possible realtime acting and multitasking to correct. And Cutting Tool User Defined Module Based on Simulation component which was consisted of basis OS, NC Code parser, Servo Motor Control, Simulator, Man-Machine Interface.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11b
• /
• pp.334-336
• /
• 2005

유비쿼터스 시대에 진입하면서 임베디드 소프트웨어의 개발에 대한 관심이 높아지고 있다. 국방 분야에서는 국방무기 및 비무기 내장형 소프트웨어 관리지침과 공군에서 운영되는 항공무기 소프트웨어 개발 프로세스 등이 운용되고 있으며, 국방 CBD 방법론은 주로 응용체계 개발을 위한 컴포넌트 기반의 구체적인 방법론이다. 이러한 국방 CBD 방법론을 임베디드 소프트웨어 개발에 적용가능 여부는 발표되지 않았다. 따라서 본 논문에서는 임베디드 소프트웨어개발을 위한 국방 CBD 프로세스 테일러링 방안을 고찰하고자 한다. 이를 위하여 국방 무기 및 비무기 내장형 소프트웨어 관리지침에 근거한 조정, 임베디드 소프트웨어 개발 방식에 따른 조정 컴포넌트 및 객체 지향기술, 그리고 UML 기술 적용으로 구분하여 테일러링 방안을 제시한다. 그 결과 국방 CBD 방법론의 적용 범위의 확대 및 개발 프로세스의 표준화에 기여할 것으로 기대된다.

• Journal of Korea Foundry Society
• /
• v.26 no.1
• /
• pp.27-33
• /
• 2006

Phase evolutions involving nucleation stages together with diffusional growth have been examined in order to provide a guideline for determining rate limiting stages during phase evolutions. In multiphase materials systems in coatings, composites or multilayered structures, diffusion treatments often result in the development of metastable/intermediate phases at the reaction interfaces. The development of metastable phases during solid state interdiffusion demonstrates that the nucleation reaction can be one controlling factor. Also, the concentration gradient and the relative magnitudes of the component diffusivities provide a basis for a phase selection and the application of a kinetic bias strategy in the phase selection. For multicomponent alloy systems, the identification of the operative diffusion pathway is central to control phase formation. Experimental access to the nucleation and growth stage is discussed in thin film multi layers and bulk samples.