• IE interfaces
• /
• v.22 no.2
• /
• pp.165-173
• /
• 2009

This paper considers a two-component assembly system that makes different types of purchasing contracts by component type and studies the issue of coordinating those contracts. Acquisition of type 1 component is based on the long-term contract. In contrast, type 2 component is intermittently purchased under the sort-term contract. We identify the structural properties of the optimal short-term contract and investigate how the changes in system parameters affect the optimal performance. To provide managerial insights, we compare the short-term and long-term contracts for type 2 component and discuss the conditions that make the short-term contract preferable to the long-term contract. We also present a result which shows that coordinating the contracts of type 1 and type 2 components can be significantly profitable over uncoordinating them.

• Proceedings of the CALSEC Conference
• /
• 2001.08a
• /
• pp.671-679
• /
• 2001

사례연구를 통하여 UML Component Design Process의 일관성 및 정확성을 검증한다. Business Concept Model과 Use Case Model을 이용하여 Component Specification Process의 산출물인 Interface, Component Specification 및 Component Architecture 작성 UML Notation을 확장해서 Component 명세에 적용하는 것이 올바른 것인지 확인한다. <>,<>,<>,<>,<>, <>:로 Component Specification이 충분한지를 확인 OCL을 이용하여 Component Specification 중 Component Specification, Interface Specification, Operation Specification, Constraint, Pre/Post Condition의 정의에 유용한지 확인(중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1270-1273
• /
• 2004

The mechanism design is synthesis of suitable mechanism which can be output motions about input motions. That has generally two steps which are the type synthesis and the dimensional synthesis. And required mechanism analysis step for confirming middle or final result. The type synthesis is definition of mechanism type which required aim and the dimensional synthesis is calculation of dimension about defined type mechanism. The type synthesis of mechanism is included qualitative design field which isn't defined systematic design method. especially, the most difficult step for mechanism design automation. In this paper proposed the component modular design method which is figured mechanism types automate with component modules using component modular approach. And develop CAD(Computer Aided Program) program for application.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.140-141
• /
• 2017

This study is based on the evaluation of a single component injection type adhesive repair material and a new 2 component type used in leakage of underground concrete structures. The studies showed that based on different mix ratio of the 2 component type adhesive sealant comprised of an asphalt main and latex mixture agent the viscosity of the material compound differed significantly. Based on a permeability testing, injection and economic efficiency, and performance, the appropriate ratio was determined to be 6:1 and was proceeded to the KS F 4935 evaluation method. The 2 component type adhesive sealant uses a static mixer and a cartridge type container for the injection procedure and was able to satisfy the evaluation criteria outlined in the KS F 4935 standard.

• Journal of Sensor Science and Technology
• /
• v.27 no.2
• /
• pp.112-117
• /
• 2018

In this study, a bender-type piezoelectric energy harvester was fabricated and evaluated to compensate for the disadvantages of high-power generation only in the resonance frequency range of a piezoelectric harvester using a piezoelectric cantilever. The generated power was investigated according to various changes in the vibration environment. Compared with the piezoelectric cantilever module, the bender-type piezoelectric module showed a larger number of peak voltages. The primary peak voltage shifted toward the low frequency when the spring was coupled to the bender-type piezoelectric module. The harvester of the three bender-type modules had a vibration frequency exceeding 1 mW in the 34-45 Hz range and generated 3.112 mW of power at the vibration frequency of 38 Hz. The harvester of the six bender-type modules had a vibration frequency exceeding 1 mW in the 31-45 Hz range and generated 3.081 mW of power at the vibration frequency of 35 Hz.

• Journal of KIISE:Software and Applications
• /
• v.36 no.5
• /
• pp.386-395
• /
• 2009

Business entities with which most service components interact are kind of cross-cutting concerns in a multi-layered distributed application architecture. When business entities are modified, service components related to them should also be modified, even though they implement common functions of the application framework. This paper proposes what we call DTT (Data Type-Tolerant) component model to process the variability of business entities, or externalized data, which feature modern application architectures. The DTT component model expresses the data variability of product lines at the implementation level by means of SCDTs (Self-Contained Data Types) and variation point interfaces. The model improves the efficiency of application engineering through data type converters which support type conversion between SCDTs and business entities of particular applications. The value of this model lies in that data and functions are coupled locally in each component again by allowing service components to deal with SCDTs only instead of externalized business eutities.

• Journal of the Korean Society of Safety
• /
• v.29 no.6
• /
• pp.34-39
• /
• 2014

This paper is aimed to prevent danger of electrical fire at cattle barn to detect resistive and capacitive leakage current component for wiring type and length. In order to analysis for electric leakage component for cattle barn sizes and normal buildings, this paper was studied field state investigation which are at cattle barn companies(10 companies) in Cheong-won location and normal buildings at Nam-bu market in Jeon-ju location. Market to deduce the problems of electric leakage component is analyzed. The resistive and capacitive leakage current component for wiring type and length is analyzed at Beon-young cattle barn. Results show that electric leakage component suggested in this paper are valuable and usable to electrical fire in leakage current based on environment factor, which will prevent severe damage to human beings and properties and reduce the electrical fires in cattle barn. It is acceptable for electrical equipment use in an cattle barn.

• Journal of Power System Engineering
• /
• v.10 no.3
• /
• pp.23-31
• /
• 2006

Mean velocities and turbulent characteristics in the three-dimensional flow fields of a gun-type gas burner were measured by using triple hot-wire probe (T-probe) in order to compare them with the results already presented by X-type hot-wire probe (X-probe). Vectors obtained by the measurement of two kinds of probes in the horizontal plane and in the cross section respectively show more or less difference in magnitude each other, but comparatively similar shape in overall distribution. Axial mean velocity component along the centerline shows that the value by T-probe is about ten times smaller than that by X-probe above the range of X/R=3. Also, the axial component of turbulent intensity along the centerline appears the biggest difference between the two probes. Moreover, axial mean velocity component, axial turbulent intensity component and rotational along the Y-directional distance show a big difference between slits and swirl vanes. On the whole, the values by T-probe appear smaller than those by X-probe.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.10a
• /
• pp.307-309
• /
• 1996

This paper analyses a deterministic scheduling problem concerned with manufacturing two types of components at a pre-assembly stage which consists of two independent feeding machines each producing its own type of component. Each type represents a unique component which may have variations in its size or quality. Therefore, the completion time of each component depends on both its type and quality (size) variations. Such manufactured components are subsequently assembled into various component dependent products. The problem has the objective measure of minimizing the total weighted completion time of a finite number of jobs(products) where the completion time of each job is measured by the latest completion time of its two components at the pre-assembly stage. The problem is shown to be NP-complete in the strong sense. A WSPT rule coupled with a machine-aggregation idea is developed for good heuristics which show the error bound of 2.

• The Journal of Advanced Prosthodontics
• /
• v.10 no.2
• /
• pp.155-162
• /
• 2018

PURPOSE. The aim of this study was to compare the fracture of implant component behavior of external and internal type of implants to suggest directions for successful implant treatment. MATERIALS AND METHODS. Data were collected from the clinical records of all patients who received WARANTEC implants at Seoul National University Dental Hospital from February 2002 to January 2014 for 12 years. Total number of implants was 1,289 and an average of 3.2 implants was installed per patient. Information about abutment connection type, implant locations, platform sizes was collected with presence of implant component fractures and their managements. SPSS statistics software (version 24.0, IBM) was used for the statistical analysis. RESULTS. Overall fracture was significantly more frequent in internal type. The most frequently fractured component was abutment in internal type implants, and screw fracture occurred most frequently in external type. Analyzing by fractured components, screw fracture was the most frequent in the maxillary anterior region and the most abutment fracture occurred in the maxillary posterior region and screw fractures occurred more frequently in NP (narrow platform) and abutment fractures occurred more frequently in RP (regular platform). CONCLUSION. In external type, screw fracture occurred most frequently, especially in the maxillary anterior region, and in internal type, abutment fracture occurred frequently in the posterior region. placement of an external type implant rather than an internal type is recommended for the posterior region where abutment fractures frequently occur.