• Journal of Labour Economics
• /
• v.25 no.2
• /
• pp.1-32
• /
• 2002

This paper investigates how real wages adjust to regional and cyclical shocks in the Korean labor market. Major findings are as follows. First, like most longitudinal studies in this literature, we find that real wages are strongly procyclical and more procyclical for men than for women. Second, consistent with the theory prediction of efficiency wages, both permanent and transitory components of real wages are negatively correlated with the local unemployment rate. Third, when overall and local unemployment rates compete in a wage equation (our preferred specification), current wages are dominantly affected by the overall rate, and the effect of the local rate is rather small. This rejects the Blanchflower and Oswald's hypothesis that wages are primarily determined by local labor market conditions. Finally, no lagged effects on wages are detected in the overall or local unemployment rate.

• International Journal of Highway Engineering
• /
• v.15 no.2
• /
• pp.47-55
• /
• 2013

PURPOSES : This study aimed to evaluate the feasibility of AASHTO86 design method for Bonded Concrete Overlay. METHODS : The Feasibility of AASHTO86 design method for Bonded Concrete Overlay is investigated based on the following study : i) Sensitivity analysis of designed service life of Bonded Concrete Overlay by major design input for AASHTO86 guide. ii) Comparison of actual Bonded Concrete Overlay life and predicted Bonded Concrete Overlay life by AASHTO86. iii) Finding the stress component influence the potential distress of Bonded Concrete Overlay based on 3-d FEM analysis. iv) Exploring the limitation of AASHTO86 in the aspect of design input. RESULTS : Sensitivity analysis showed that the condition of existing pavement significantly on the Bonded Concrete Overlay life. Also the overlay thickness affect the Bonded Concrete Overlay life. The comparison of actual Bonded Concrete Overlay life and predicted Bonded Concrete Overlay life showed relatively good agreement when the early distress sections are excluded in comparison. Bonding stress occurred at the interface may be larger than the bond strength used in the specification of Bonded Concrete Overlay construction. CONCLUSIONS : Bonded Concrete Overlay life predicted by the AASHTO86 may not be reliable. Number of points to improve the reliability in the design of Bonded Concrete Overlay are suggested in this study.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.2
• /
• pp.115-120
• /
• 2005

As a popularity of a portable digital device such as a cellular phone, a digital camera and a MP3 player is spreading, the demand of the mobile storage device increases rapidly. A bluray technology using 405nm laser diode and objective lens having high NA(Numerical Aperture), 0.85, satisfies a miniaturization and a high capacity which are the requirements of the portable device. To develop SFFOP(small form factor optical pickup), it is prerequisite to minimize the number of optical components and establish evaluation and assembly method of micro optical pickup system as well as mass production method of micro optical component. To minimize optical elements of optical pickup, there have been many researches to use P-HOE(Polarized Holographic Optical Element) due to its extremely small size and versatile function. However, P-HOE is handled and assembled very accurately in SFFOP. In this paper, static error signal detection method is developed for an alignment of P-HOE in SFFOP. Using developed static error signal detection method, P-HOE can be aligned very accurately with real time result of static error signals of pickup such as FES(focusing error signal) and TES(Tracking Error Signal). The developed static error signal detection method is verified by the evaluation of commercialized DVD Pickup. And finally. developed static error signal detection method is applied for the assembly of P-HOE in SFFOP system satisfies specification of BD(Blu-ray Disk).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.12
• /
• pp.994-1001
• /
• 2013

Process of helicopter development is divided in design, manufacture and test & evaluation phase. Test & evaluation is performed step by step in order of component test, rig test, system ground test and flight test. After completing ground test and before first flight, US military specification requires 50hrs-PFAT in order to assure flight safety. PFAT is the test which requires tie-down and severe load imposition and it needs special ground test vehicle which is similar to helicopter prototype as well as much cost and period. In case of KUH, we have performed tailored PFAT considering KUH development environment. In this paper, we propose a proper way to perform the PFAT in accordance with development environment by giving KHU PFAT procedure and result.

• The Journal of the Korean dental association
• /
• v.43 no.1 s.428
• /
• pp.41-52
• /
• 2005

Information Technology has extended its scope to the medical field as well as dental field. Like medical field, network ststem for dental field requires acquisition, storage, and display of images. However, unlike the medical field, the system to integrate several information including medical images has not been developed according to industrial standard for management of digital image for medical use, so called DICOM conformance. which makes the digital environment in dental field more and more difficult and expensive for this standardization and comfortable communication in LAN and WAN. To solve this problem, the DICOM encoder and server has to be developed because the DICOM file can be easily retrieved with patient's information from the DICOM server in the system as DICOM file has the standard specification to integrate the patient's information. The information including image and other discrete data can be easily integrated in DICOM file and can be used without any difficulty for precise diagnosis and for contribution to the decision making for each treatment protocol. Therefore, the system composed of DICOM encoder and server in dental practive for DICOM file must be developed with prudent consideration of the several strategic factors: I) Enhanced diagnostic capability through the integrated information of image and clinical data. ii) Clinician-friendly interface to simulate the systemic treatment procedure in clinical practice iii) Implementation of multidisciplinary treatment protocol The development of DICOM encoder and server based on these strategic considerations will provide paperless and filmless hospital environments by the seamless integration and management of patient's history, several clinical data and clinical images through image processing for quantitative analysis. The system also allows clinicians to provide more predictable dental care for the patients.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.365-370
• /
• 2014

For real-time monitoring of colloidal nanoparticles (NPs) in aqueous media, a light sheet type dark-field microscopy system combined with a microfluidic concentration gradient generator (${\mu}FCGG$-LSDFM) was developed. Various concentrations of colloidal Au NPs were simultaneously generated with the iFCGG and characterized with the LSDFM setup. The number concentrations and hydrodynamic size distributions were measured via particle counting and tracking analysis (PCA and PTA, respectively) approaches. For the 30 nm Au NPs used in this study, the lower detection limit of the LSDFM setup was 3.6 ng/mL, which is about 400 times better than that of optical density measurements under the same ${\mu}FCGG$ system. Additionally, the hydrodynamic diameter distribution of Au NPs was estimated as $39.7{\pm}12.2nm$ with the PTA approach, which agrees well with DLS measurement as well as the manufacturer's specification. We propose this ${\mu}FCGG$-LSDFM setup with features of automatic generation of NP concentration gradient and real-time monitoring of their physicochemical characteristics (e.g., number concentration, and hydrodynamic size distribution) as an important component of future high-throughput screening or high-content analysis platforms of nanotoxicity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.6
• /
• pp.521-530
• /
• 2013

This paper proposes a task parallelism system (BioMP) to improve applications' execution time of multicore based mobile device. When application developers append the functions of parallel specification into the existing software, our proposed system supports the parallel processing of threads as well as a compatibility. BioMP improves the software in order that an existing large-scale source can recognize the multicore architecture. From our experiment, our idea improved the execution time of application until about 64% against the existing system in multicore environment based on quad core. In addition, BioMP does not require any additional modification of a mobile platform because BioMP is independent component. Consequently, when application developers release multicore-aware applications into the application store, users can immediately run without any modification of the mobile device.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1A
• /
• pp.1-8
• /
• 2007

In this paper, we have derived the Noise-Equation to determine the level of cross-modulation noise that is required for designing multi-band CDMA handset from IS-98 standard. From this Noise-Equation, also we were able to determine each component's specification and forecast the performance(or margin) of designing handset. In conclusion, we have designed and implemented the multi-band CDMA handset of Qualcomm's Zero-IF structure and verified validity of the Noise-Equation. In result, we have got the result of ${\pm}0.5dB$ error between Noise-Equation and actual measurement. Therefore, this paper will give a guideline for design of the Multi-Band CDMA handset.

• Polymer(Korea)
• /
• v.31 no.2
• /
• pp.141-147
• /
• 2007

Dental properties of polymer composite loaded with hybrid filler of barium silicate (BaSi) and hydroxyapatite, which is a principal component of human bone material, were investigated. A visible light system was utilized to activate the acrylic resin matrix of the composite. Based on the experimental results, it was found that mechanical strength of the composite was consistently increased with an increase of BaSi content in the hybrid filler. And those value rose above the dental specification enough to apply for dental materials. However, abrasion resistance was slightly decreased with increasing BaSi content in the filler. Depth of cure value was 6 to 9 mm applicable for dental restoration irrelevant to hybrid filler composition. On the other hand, there was no strict trend between filler composition and polymerization shrinkage as well as degree of conversion.

• Journal of KIISE:Software and Applications
• /
• v.32 no.9
• /
• pp.835-846
• /
• 2005

A Product Line (PL) is a set of products (applications) that share common assets in a domain. Product Line Engineering (PLE) is a set of principles, techniques, mechanisms, and processes that enables the instantiation of produce lines. Core assets, the common assets, are created and instantiated to make products in PLE. Model Driven Architecture (MDA) is a new software development paradigm that emphasizes its feasibility with automatically developing product. Therefore, we can get advantages of both of the two paradigms, PLE and MDA, if core assets are represented as PIM in MDA with predefined automatic mechanism. PLE framework in the PIM level has to be interpreted by MDA tools. However, we do not have a standard UML profile for representing core assets. The research about representing PLE framework is not enough to make automatically core assets and products. We represent core asset in PIM level in terms of structural view and semantic view. We also suggest a method for representing architecture, component, workflow, algorithm, and decision model. The method of representing framework with PLE and MDA is used to improve productivity, applicability, maintainability and qualify of product.