• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1211-1215
• /
• 2003

Pressure tubes are major component of nuclear reactor, but only selected samples are periodically examined due to numerous numbers of tubes. Current in-service inspection result show there is high probability of flaw existence at un-inspected pressure tube. Probabilistic analysis is applied in this study for the integrity assessment of un-inspected pressure tube. But all the current integrity evaluations procedures are based on conventional deterministic approaches. So many integrity evaluation parameters are not directly apply to probabilistic analysis. As a result of this study failure assessment diagram are proposed based on test data.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1033-1038
• /
• 2003

A wind turbine obtains its power input by converting the force of the wind into a torque (turning force) acting on the rotor blades. The amount of energy which the wind transfers to the rotor depends on the density of the air, the rotor area, and the wind speed. Because it has long term operating life and very complex load condition, the fatigue strength of each component must be considered. In this paper, we calculated the load condition by wind using a combined blade elemental theory and a FEM based analytical approach was use to evaluate the fatigue strength of a Hub of wind turbine. The effect of tensile mean stress was taken into account by the modified Goodman diagram. Using this approaches, we evaluated the fatigue strength of hub and main shaft and improved the design.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.256-258
• /
• 2003

Two Si wafers are bonded with indium-silver alloy using diffusion bonding method. When silver and indium thin films are contacted, they diffuse into each other and form inter-metallic compounds like $AgIn_2$, $Ag_2In$, $Ag_3In$ etc. These compounds are determined by ratio of two metals. From phase diagram of Ag-In alloy, we can get the ratio of $Ag_2In$, that has high melting point about 700$^{\circ}C$, approximately 2:1. This ratio was made by controlling of film thickness. And bonding was executed by annealing and adding pressures at a time. The joint of these wafers had been observed by SEM. And we had also seen the EDS (Energy Dispersive Spectroscopy) data to analysis the component of samples.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.483-488
• /
• 2000

This study aims at developing the high speed/intelligent machining system using the plug/play method of an open architecture controller. The plug/play technology by the application Specific Function (ASF), can readily implement the open architecture controller into various machining system or other automatic devices. The plug/play method integrates the ASF, visual builder, controller OS technology. This study, as an example, presents a schematic diagram for integration of an open architecture CNC and individual component technology for the high speed/intelligent machining system.

• 소음진동
• /
• 제9권5호
• /
• pp.1029-1035
• /
• 1999

This paper relates to the flexural vibration analysis of slender spindle systems with multiple thin disks, supported by the ball bearings by means of the finite element method. Each system component is analytically modeled taking into account its flexibility and also the centrifugal effect especially for the disk. In order to show the rapid convergence rate and accuracy of the proposed approach, an experimental set-up is built to be versatile. In two distinct cases, its natural modes are numerically computed using only a small number of total element meshes as the shaft rotational speed is varied, and verified through experimental frequency response function obtained by the impact test.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.318-321
• /
• 2005

The shell part is made of 2-layered blank because of functional requirements. To investigate the draw formability in this kind of part, the 2-layered sheet metal forming analysis process should be stipulated. First of all, treatment of contact with each blank must be considered to prevent the penetration on the each blank. Subsequently, applying the draw bead force is considered carefully because application of drawbead force for analysis is different with equivalent drawbead force. Formability as like crack, neck and wrinkles is estimated by FLD(Forming Limit Diagram) and thinning. A feasibility of the 2-layered sheet metal forming analysis process study is verified compare 2-layered sheet metal forming analysis with experimental results.

• 한국산업정보학회논문지
• /
• 제6권4호
• /
• pp.39-47
• /
• 2001

소프트웨어 구조는 시스템 컴포넌트들과 그들의 상호관계를 이해하기 위한 프레임워크로서 제공된다. 또한 소프트웨어 구조는 낮은 비용, 높은 생산성 및 일관된 품질을 이루기 위해 재사용 될 수 있다. 본 논문에서는 우리가 개발한 소프트웨어 구조 설계 환경인 HanyWork의 구조와 기능을 설명한다. HappyWork는 두 가지의 주요한 기능을 가진다. 첫째로 HappyWork는 소프트웨어 구조 다이어그램의 모델링을 위한 그래픽 에디터를 제공하고, 둘째로 HWL(HappyWork language)라는 소프트웨어 구조 기술 언어를 제공한다.

• 산업경영시스템학회지
• /
• 제30권1호
• /
• pp.1-7
• /
• 2007

This paper addresses a the maintenance system based on the concept of RAMS (Reliability, Availability, Maintenance, Safety) for the effective maintenance of the urban transit. A systematic approach for developing a cost-effective maintenance strategy based on the component reliability of the system in question is performed according to the following steps : definition of function, functional failures of the systems, construction of RBD (Reliability Block Diagram), and the calculation of reliability indices. The developed preventive maintenance system generates maintenance plan and repair request based on the analysed RAMS data of components and maintenance experience.

• 전기학회논문지
• /
• 제66권7호
• /
• pp.1047-1052
• /
• 2017

In this paper, the calculation torque using the d-q axis has advantage like faster execution time. However, the torque ripple can't be considered in the torque calculation using d-q axis equivalent circuit because the time-dependent component is removed. When d-q transformation was performed, it was founded that some parameters has some characteristics. These characteristics were considered for representing torque ripple. The calculation with d-q axis transformation and Finite Element Analysis(FEA) were performed, and the results were compared. As a result, it was validated that the calculated torque can be expressed with ripple.

• International Journal of Advanced Culture Technology
• /
• 제12권1호
• /
• pp.128-133
• /
• 2024

Painting, as an artistic creation with aesthetic characteristics, is inseparable from "shape". "Modeling" is a subjective way of expressing objects, and "black shape" is not only a way of expression, but also a way of composition. "Black shape" is a way of expressing the overall picture of the creator, and "black shape" extracted from the pattern analysis of black and white gray structure is a powerful means to deeply explore the emotions and thoughts of the painter. How to create the expression of subjective intention in the creation of artificial figure painting and to explore the beauty of picture form and the presentation of formal language in multiple dimensions is always sought by painters. Tang Dynasty political stability, economic and cultural development of unprecedented prosperity, "Toujian Diu" as a representative painting of Tang Dynasty, the figure is plump and realistic, colorful but elegant. It not only represents the aesthetic taste of the Tang Dynasty, but also reflects the overall style of the Tang Dynasty's artificial figure painting. The aim of this paper is to explore the value of "black shape" in "Toughen Diagram" and analyze its multi-component form in depth.