• 제목/요약/키워드: Compliant layer

검색결과 34건 처리시간 0.033초

CReMeS: A CORBA COmpliant Reflective Memory based Real-time Communication Service

  • Chung, Sun-Tae
    • 한국통신학회논문지
    • /
    • 제25권10B호
    • /
    • pp.1675-1689
    • /
    • 2000
  • We present CReMeS a CORBA-compliant design and implementation of a new real-time communication service. It provides for efficient predictable and scalable communication between information producers and consumers. The CReMeS architecture is based on MidART's Real-Time Channel-based Reflective Memory (RT-CRM) abstraction. This architecture supports the separation of QoS specification between producer and consumer of data and employs a user-level scheduling scheme for communicating real-time tasks. These help us achieve end-to-end predictability and allows our service to scale. The CReMeS architecture provides a CORBA interface to applications and demands no changes to the ORB layer and the language mapping layer. Thus it can run on non real-time Off-The-Shelf ORBs enables applications on these ORBs to have scalable and end-to-end predictable asynchronous communication facility. In addition an application designer can select whether to use an out-of-band channel or the ORB GIOP/IIOP for data communication. This permits a trade-off between performance predictability and reliability. Experimental results demonstrate that our architecture can achieve better performance and predictability than a real-time implementation of the CORBA Even Service when the out-of-band channel is employed for data communication it delivers better predictability with comparable performance when the ORB GIOP/IIOP is used.

  • PDF

저 잡음 수중 청음기의 설계 방안 연구 - Ⅱ. 음향 감쇠층 재질의 영향 - (Design and Evaluations of Underwater Hydrophone with Self Noise Suppressing Structures; - Part Ⅱ. Influence of Acostic Damping Layer Properties -)

  • 임종인;노용래
    • 한국음향학회지
    • /
    • 제16권3호
    • /
    • pp.13-17
    • /
    • 1997
  • 본 논문에서는 구조 변경한 저 잡음 수중 청음기에서 사용되는 음향 감쇠층의 최적 물성을 제시하고 제작 가능성을 알아보고자 하였다. 이를 위하여 음향 감쇠층의 특성 중 재료 감쇠도와 음향 임피던스를 변화시켜 FEM (Finite Element Method)으로 과도 해석하여 재질 변경에 따른 잡음 응답 특성을 고찰 하였다. 그 결과 재료의 감쇠도는 큰 영향이 없었으며 1 Mrayl 이하 혹은 4 Mrayl 이상의 음향 임피던스 값을 갖는 음향 감쇠층을 사용하는 것이 효율적임을 알 수 있었다. 이러한 목적을 위해서는 일반적인 흡음 재료로 사용되는 고분자 폴리머들은 본 연구의 수중 청음기용 음향 감쇠 층으로 사용하기에 부적합하고, 새로운 금속 혹은 세라믹-폴리머 복합체의 개발이 필요하다.

  • PDF

무한 평판 주위에 형성된 수중 기포층의 방사소음 감소 효과 (Noise Reduction Effect of an Air Bubble Layer on an Infinite Flat Plate)

  • 김종철;오준석;조대승
    • 한국소음진동공학회논문집
    • /
    • 제17권2호
    • /
    • pp.168-176
    • /
    • 2007
  • The mixture sound speed in bubbly fluids is highly dispersive due to differences of the density and compressibility between bubbles and fluids. The dispersion range in bubbly fluids expands to a higher frequency than the resonance frequency of an air bubble. A theoretical model was developed to compute the reduction of radiation noise that is generated by a force applied on an infinite flat plate using a bubble layer as a compliant baffle. For evaluating the effectiveness of a bubble layer in reducing the structure-borne noise of an infinite elastic plate, the noise reduction levels for various parameters such as the thickness of bubble layers, the volume fractions and the distribution types of bubbly fluids are calculated numerically. The noise reduction effect of an air bubble layer on an infinite flat plate is considerable level and similar to the tendency of dispersion of bubbly fluids. It is recommended that the thickness of a bubble layer should be increased with keeping an appropriate volume fraction of an air bubble for the most effective reduction of the radiation noise.

ALE 기반 RFID 미들웨어 설계 및 구현 (A Design and Implementation of ALE-compliant RFID Middleware System)

  • 홍연미;변영철
    • 한국정보통신학회논문지
    • /
    • 제11권4호
    • /
    • pp.648-655
    • /
    • 2007
  • 유비쿼터스 컴퓨팅을 실현하기 위하여 자동식별, 센서 네트워크, 홈 네트워크, 텔레매틱스 등 다양한 분야에서 연구가 진행되고 있다. 특히 RFID 기술을 이용한 레거시 시스템과의 통합 및 데이터 수집, 장치 제어, 관리 등을 위하여 RFID 미들웨어의 중요성에 대한 인식이 확산되고 있다. 이에 발맞추어 EPCglobal에서는 기존의 Savant를 대체하는 개념으로서 RFID 하드웨어와 응용 사이에 존재하는 ALE(Application Level Events) 표준 스펙을 정 의하였다. 이는 레이어의 내부 구조 및 구현 기술 등은 명시하지 않고 오직 외부 인터페이스만을 정의함으로써 향후 상호 운용성 및 표준 적합성 검증을 용이하게 한다. 본 논문에서는 이러한 ALE 스펙에 기반하여 RFID 태그 데이터를 효율적으로 처리할 수 있는 RFID 미들웨어 시스템을 설계하고 구현하였다.

Synthesis and Tribological Behavior of Nanocomposite Polymer Layers

  • Tsukruk, V.V.;Ahn, Hyo-Sok;Julthongpiput, D.;Kim, Doo-In
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
    • /
    • pp.51-52
    • /
    • 2002
  • We report results on microtribological studies of chemically grafted nanoscale polymer layers of different architecture with thickness below 30 nm. We have fabricated the molecular lubrication coatings from elastomeric tri-block copolymers and tested two different designs of corresponding nanocomposite coatings. We observed a significant reduction of friction forces and an increase of the wear stability when a minute amount of oil was trapped within the grafted polymer layer. These polymer gel layers exhibited a very steady friction response and a small value of the coefficient of friction as compared to the initial polymer coating. A polymer 'triplex' coating has been formed by a multiple grafting technique. The unique design of this layer Includes a hard-soft-hard architecture with a compliant rubber interlayer mediating localized stresses transferred through the topmost hard layer. This architecture provides a non-linear mechanical response under a normal compression stress and allows additional dissipation of mechanical energy via the elastic rubber interlayer.

  • PDF

A Cross-layer Link Adaptive HD Video Transmission Scheme in WiMedia D-MAC based UWB Systems

  • Joo, Yang-Ick
    • 한국멀티미디어학회논문지
    • /
    • 제15권12호
    • /
    • pp.1464-1474
    • /
    • 2012
  • In this paper, we propose a QoS (Quality of Service)-aware and cooperative resource reservation scheme using cross-layer link adaptation for wireless high definition video transmission through UWB (Ultra Wide Band) network with D-MAC (Distributed Medium Access Control). A wireless high definition video transmission system usually requires stable high throughput even without line-of-sight, e.g., a destination device in another room separated by a wall. Since the WiMedia D-MAC supporting DRP (Distributed Reservation Protocol) scheme causes lots of DRP resource reservation conflicts due to failure of beacon detection in wireless channel environment, overall performances of the WiMedia D-MAC can be deteriorated. And the current WiMedia MAC standard has not considered QoS provisioning even though QoS parameters such as a range of service rates are provided to each traffic stream. Therefore, we propose Relay DRP protocol with QoS-based relay node selection criterion, which makes a relay path to avoid DRP resource reservation conflicts and guarantee QoS more stably through cross-layer link adaptation of cooperative relay transmission scheme and is compliant with the current WiMedia D-MAC protocol. Simulation results demonstrate performance improvements of the proposed method for throughput and QoS provisioning.

Controlled Formation of Surface Wrinkles and Folds on Poly (dimethylsiloxane) Substrates Using Plasma Modification Techniques

  • Nagashima, So;Hasebe, Terumitsu;Hotta, Atsushi;Suzuki, Tetsuya;Lee, Kwang-Ryeol;Moon, Myoung-Woon
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
    • /
    • pp.223-223
    • /
    • 2012
  • Surface engineering plays a significant role in fabricating highly functionalized materials applicable to industrial and biomedical fields. Surface wrinkles and folds formed by ion beam or plasma treatment are buckling-induced patterns and controlled formation of those patterns has recently gained considerable attention as a way of creating well-defined surface topographies for a wide range of applications. Surface wrinkles and folds can be observed when a stiff thin layer attached to a compliant substrate undergoes compression and plasma treatment is one of the techniques that can form stiff thin layers on compliant polymeric substrates, such as poly (dimethylsiloxane) (PDMS). Here, we report two effective methods using plasma modification techniques for controlling the formation of surface wrinkles and folds on flat or patterned PDMS substrates. First, we show a method of creating wrinkled diamond-like carbon (DLC) film on grooved PDMS substrates. Grooved PDMS substrates fabricated by a molding method using a grooved master prepared by photolithography and a dry etching process were treated with argon plasma and subsequently coated with DLC film, which resulted in the formation of wrinkled DLC film aligning perpendicular to the steps of the pre-patterned ridges. The wavelength and the amplitude of the wrinkled DLC film exhibited variation in the submicron- to micron-scale range according to the duration of argon plasma pre-treatment. Second, we present a method for controlled formation of folds on flat PDMS substrates treated with oxygen plasma under large compressive strains. Flat PDMS substrates were strained uniaxially and then treated with oxygen plasma, resulting in the formation of surface wrinkles at smaller strain levels, which evolved into surface folds at larger strain levels. Our results demonstrate that we can control the formation and evolution of surface folds simply by controlling the pre-strain applied to the substrates and/or the duration of oxygen plasma treatment.

  • PDF

ALE 기반 RFID 미들웨어 시스템 설계 (A Design of ALE-compliant RFID Middleware System)

  • 홍연미;조윤상;변지웅;노영식;박상열;오상현;변영철
    • 한국콘텐츠학회:학술대회논문집
    • /
    • 한국콘텐츠학회 2006년도 추계 종합학술대회 논문집
    • /
    • pp.469-473
    • /
    • 2006
  • 유비궈터스 컴퓨팅을 실현하기 위한 핵심 기술인 자동식별, 센서 네트워크, 홈 네트워크, 텔레매틱스 등 다양한 분야에서 연구가 진행되고 있다. 특히 RFID 기술을 이용한 기존 솔루션과의 통합 및 데이터 수집, 제어, 관리 등을 지원하는 RFID 미들웨어의 중요성에 대한 인식이 확산되고 있다. 한편 EPCglobal에서는 기존의 Savant를 대체하는 개념으로서 RFID 하드웨어와 응용 사이에 존재하는 ALE(Application Level Events) 표준 스펙을 정의하였다. 이는 레이어의 내부 구조 및 구현 기술 등은 명시하지 않고 오직 외부 인터페이스만을 정의함으로써 향후 상호 운용성 및 표준 적합성 검증을 용이하게 한다. 본 논문에서는 이러한 ALE 스펙에 기반하여 RFID 데이터를 효율적으로 처리할 수 있는 RFID 미들웨어를 제안한다.

  • PDF

High-Yield Etching-Free Transfer of Graphene: A Fracture Mechanics Approach

  • Yoon, Taeshik;Jo, Woo Sung;Kim, Taek-Soo
    • 마이크로전자및패키징학회지
    • /
    • 제21권2호
    • /
    • pp.59-64
    • /
    • 2014
  • Transfer is the critical issue of producing high-quality and scalable graphene electronic devices. However, conventional transfer processes require the removal of an underlying metal layer by wet etching process, which induces significant economic and environmental problems. We propose the etching-free mechanical releasing of graphene using polymer adhesives. A fracture mechanics approach was introduced to understand the releasing mechanism and ensure highyield process. It is shown that the thickness of adhesive and target substrate affect the transferability of graphene. Based on experimental and fracture mechanics simulation results, we further observed that compliant adhesives can reduce the adhesive stress during the transfer, which also enhances the success probability of graphene transfer.

Analytical modelling of multilayer beams with compliant interfaces

  • Skec, L.;Schnabl, S.;Planinc, I.;Jelenic, G.
    • Structural Engineering and Mechanics
    • /
    • 제44권4호
    • /
    • pp.465-485
    • /
    • 2012
  • Different mathematical models are proposed and their analytical solutions derived for the analysis of linear elastic Reissner's multilayer beams. The models take into account different combinations of contact plane conditions, different material properties of individual layers, different transverse shear deformations of each layer, and different boundary conditions of the layers. The analytical studies are carried out to evaluate the influence of different contact conditions on the static and kinematic quantities. A considerable difference of the results between the models is obtained.