• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.11a
• /
• pp.356-362
• /
• 2008

This study is intended to evaluate the characteristics of smoke spreading and the appropriateness of evacuation time extended by operation of smoke control system during fire within the underground space of the building structured in compliance with the smoke control system performance criteria from the local fire safety standard in Korea. As a preceding review of this study, the combustibles was categorized and identified their heat release rates. For validate the estimated values, modeling a single underground shop was carried out. And a numerical analysis both in case of smoke control system in operation and the system not in operation was carried out of underground space. From the viewpoint of securing the evacuation time, the results were compared in an attempt to assess the appropriateness of the fire safety criteria.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.8 no.2
• /
• pp.178-185
• /
• 1998

In order to evaluate and improve the performance of local exhaust ventilation systems for two TCE degreasing (A, B) and two electroplating (C, E) and one acid dipping & plating (D) operations located in Kimhae, the performance test was conducted with trace gases and a thermal anemometer (Kanomax 24-6111, Japan). For the inadequately designed systems, the improvement and redesigns in compliance with recommendation by ACGIH was suggested. The results of performance test for each system are as follows; 1. System of Workplace A was generally well-designed. Actual exhaust air flow rate was in excess of 68% above the recommended standard exhaust air flow rate. 2. System of Workplace B was very well-designed and completely enclosed. 3. All systems of Workplace C including hoods were poorly-designed and actual exhaust air flow rates were insufficient for open tanks. All systems should be upgraded according to ACGIH recommendations. 4. Supply and exhaust air flow rate of push-pull exhaust systems in Workplace D should be greatly increased. The width of flange of dipping tank hood should be increased with the value suggested. 5. System of Workplace E was well-designed. Actual exhaust air flow rate was in excess of 54% above the required.

• Journal of Power System Engineering
• /
• v.15 no.1
• /
• pp.39-44
• /
• 2011

This study was to investigate the effects of stress ratio and anisotropy on Fatigue Crack Propagation(FCP) behavior of rolled magnesium alloy AZ31B. The experimental materials were a Mg-Al-Zn magnesium alloy. The FCP test was conducted on compact tension specimen by a servo-hydraulic fatigue testing machine in air at room temperature. Compact tension specimens were prepared from the extruded parallel and vertical rolling direction. The test condition was frequency of 10Hz and sinusoidal load stress ratios are 0.1 and 0.7. The FCP rates was automatically measured by a compliance method. In the case of the FCP of AZ31B, the FCP of both direction of LT and TL by anisotropy of specimens are almost same value. In lower stress ratio, the FCP of the LT, TL specimens are increased in lower ${\Delta}K$ region but higher ${\Delta}K$ regions are almost same value. Finally, the result of observed the surface crack, it expressed the quasi-cleavage fracture in lower ${\Delta}K$ region and straight mark on the aspect of the facet in high ${\Delta}K$ region.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.9
• /
• pp.2792-2799
• /
• 1996

It was shown in the previous study that the numerically derived elastic work factor for CLS specimen was independent of fiber direction for a unidirectional case. Also, it was proposed the elastic work factor could be used to determine energy release rate from a single test record. In the present study, elastic work factor was derived from a simple beam theory to investigate its dependence on material property and geometric condition. Also, the elastic work factor of CLS specimen was applied experimentally to determine critical energy release rate in order to prove its validity determining critical energy release rate from a single specimen. For this purpose, critical energy release rate determined using the elastic work factor was compared with that determined by the compliance method. The results showed that while elastic work factor is affected by $t_2/t_1$ and $L_2/L_1$ it is independent of fiber angle for a unidirectional case. It was also found that critical energy release rates determined by both methods are comparable each other, thus elastic work factor approach can be used to determine energy release rate from a single test specimen.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.2
• /
• pp.208-214
• /
• 1986

To establish the evaluation of the fatigue crack growth behavior in 5083-O aluminum alloy, constant load-amplitude fatigue crack growth tests were carried out under the small scale yielding conditions. Crack length and closure of this material were measured by the compliance method using a clip-on gage. The main results obtained as follows: The fatigue crack growth rate against stress intensity factor range .DELTA.K exhibits the trilinear form with two transitions at the growth rate 5.5*10$^{-6}$ and 5.5*10$^{-5}$ mm/cycle, in the so-caled Region II. The trilinear form appears still in the plot of growth rate versus effective stress intensity factor range .DELTA. $K_{eff}$. Stress ratio R affects the relationship of crack growth rates versus .DELTA.K but does not affect the reation of crack growth rate versus .DELTA. $K_{eff}$. The experimental results indicate that the effective stress intensity range ratio U depends on the maximum stress intensity factor $K_{max}$, but not on the stress ratio R.o R.R.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.6
• /
• pp.411-417
• /
• 2015

The shipping and shipbuilding industries have had business difficulties since the implementation of regulations on the CO₂ emissions from ships by IMO and the occurrence of the global financial crisis in 2008. Under this global recession, most shipping firms have started to operate their fleets at slow steaming rates with the goal of improving the profit ratio per transported unit. This study analyzed the resistance performance of a 6,800 TEU container ship corresponding to its trim variation with slow steaming, compared with that at its original design speed. Two different grid systems were used for the numerical calculation, one that considered the free surface allowing the capture of the dynamic trim and one that did not. This made it possible to clearly classify each resistance component to provide useful information to hull-form designers. In addition, a form factor assumption method using CFD was used for a reasonable effective power prediction in compliance with the 1978 ITTC performance prediction method. It was found that the total resistance of a 6,800 TEU container ship was reduced by 2.6% in the case of a 1-m trim at the bow at 18 kn.

• Korean Journal of Clinical Pharmacy
• /
• v.19 no.1
• /
• pp.65-68
• /
• 2009

Disposal infusion device is known to be useful for chemotherapy. Anti-cancer drug can be released by the force of carbon dioxide or balloon. In this study, we compared the$Anapa^{(R)}$ (LC0020) with B Company (LV2 ml) in terms of infusion rate and stability. Infusion rate was determined every six minute using software, MSI08IH. Stability of 5-fluorouracil was examined periodically using a High Performance Liquid Chromatography. Infusion rates of gas-derived $Anapa^{(R)}$ device were 2.29, 1.86, 1.98 ml/hr and those of balloon-derived B Company device were 1.71, 1.58, 1.37 ml/min. There were no significant differences in stability of 5-fluorouracil between $Anapa^{(R)}$ and B Company devices. In summary, gas-derived $Anapa^{(R)}$ device is thought to be comparable or superior to balloon-derived B Company device as far as infusion rate and stability are concerned. We expect that $Anapa^{(R)}$ as a home infusion device can be employed to improve a quality of life and compliance of cancer patients.

• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.6
• /
• pp.497-505
• /
• 2021

This paper investigates the current status of Jeju special self-governing province (JSSGP)'s water infrastructure and recommends directions for improvement. JSSGP relies on groundwater for most of its water resources. Recently, water usage has been steadily increasing due to the increase of residents and tourists while the quality of groundwater has been steadily worsening. Deterioration in water quality of groundwater can be seen through the increase in concentration of nitrate nitrogen and microorganisms. To overcome such problems, water consumption must be reduced by water demand management in all fields including residential and agricultural water use. The quality of water resources should be preserved through the management of pollutants. For efficient management of water resources, great efforts should be made to reduce the leakage rates in household and agricultural water, which is currently at the highest level in the country. Furthermore, diversification of water intake sources other than groundwater is needed, especially for agricultural water supply. For water and sewerage facilities, compliance with drinking water quality standards and discharge water quality standards must be achieved through the optimization of operation management. This process requires recruiting professionals, improving existing workers' expertise, and improving facilities.

• Korean Circulation Journal
• /
• v.53 no.9
• /
• pp.594-605
• /
• 2023

Acute myocardial infarction (AMI) is a major cause of morbidity and mortality in the Asia-Pacific region, and mortality rates differ between countries in the region. Systems of care have been shown to play a major role in determining AMI outcomes, and this review aims to highlight pre-hospital and in-hospital system deficiencies and suggest possible improvements to enhance quality of care, focusing on Korea, Japan, Singapore and Malaysia as representative countries. Time to first medical contact can be shortened by improving patient awareness of AMI symptoms and the need to activate emergency medical services (EMS), as well as by developing robust, well-coordinated and centralized EMS systems. Additionally, performing and transmitting pre-hospital electrocardiograms, algorithmically identifying patients with high risk AMI and developing hospital networks that appropriately divert such patients to percutaneous coronary intervention-capable hospitals have been shown to be beneficial. Within the hospital environment, developing and following clinical practice guidelines ensures that treatment plans can be standardised, whilst integrated care pathways can aid in coordinating care within the healthcare institution and can guide care even after discharge. Prescription of guideline directed medical therapy for secondary prevention and patient compliance to medications can be further optimised. Finally, the authors advocate for the establishment of more regional, national and international AMI registries for the formal collection of data to facilitate audit and clinical improvement.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.23
• /
• pp.10157-10164
• /
• 2015

Background: Breast cancer is the most common cancer among women in the State of Qatar. Due to low participation in breast cancer screening (BCS) activities, women in Qatar are often diagnosed with breast cancer at advanced stages of the disease. Findings indicate that low participation rates in BCS activities are significantly related to women's low level of awareness of breast cancer screening. The objectives of this study were to: (1) determine the factors that influence Qatari women's awareness of breast cancer and its screening activities: and (2) to find ways to effectively promote breast cancer screening activities among Arabic speaking women in Qatar. Materials and Methods: A multicenter, cross-sectional quantitative survey of 1,063 (87.5% response rate) female Qatari citizens and non-Qatari Arabic-speaking residents, 35 years of age or older, was conducted in Qatar from March 2011 to July 2011. Outcome measures included participant awareness levels of the most recent national recommended guidelines of BCS, participation rates in BCS activities, and factors related to awareness of BCS activities. Results: While most participants (90.7%) were aware of breast cancer, less than half had awareness of BCS practices (28.9% were aware of breast self-examination and 41.8% of clinical breast exams, while 26.4% knew that mammography was recommended by national screening guidelines. Only 7.6% had knowledge of all three BCS activities). Regarding BCS practice, less than one-third practiced BCS appropriately (13.9% of participants performed breast self-examination (BSE) monthly, 31.3% had a clinical breast exam (CBE) once a year or once every two years, and 26.9% of women 40 years of age or older had a mammogram once every year or two years). Awareness of BCS was significantly related to BCS practice, education level, and receipt of information about breast cancer and/or BCS from a variety of sources, particularly doctors and the media. Conclusions: The low levels of participation rates in BCS among Arab women in this study indicate a strong need to increase awareness of the importance of breast cancer screening in Qatari women. Without this awareness, compliance with the most recent breast cancer screening recommendations in Qatar will remain low. An increased effort to implement mass media and public health campaigns regarding the impact of breast cancer on women's health and the benefits of early detection of breast cancer must be coupled with an enhanced participation of health care providers in delivering this message to Qatar population.