• Applied Biological Chemistry
• /
• v.19 no.2
• /
• pp.75-81
• /
• 1976

High ionic strength is expected to enhance dissociation of Ca-DPA from spores and to contribute to a detrimental effect on spore stability or on spore heat resistance with a combined treatment of gamma-radiation. From this study, this hypothesis has become apparent as as follows; 1) Ca-DPA dissociation contributes to loss of stability of bacterial spores with respect to heat resistance, survival during storage, and 2) the cytoplasmic membrane plays a role in maintaining the stability of DPA-Ca-spore complex, apparently by serving as a permeability barrier.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.2
• /
• pp.409-416
• /
• 2022

As a food ingredient, the extract has been proven of its antioxidant properties and safe to be consumed. It's increased antioxidant activity was evaluated by comparing its activity to the complex extract of fruits and vegetables, which is known to exhibit both antioxidant and physiological activities. In this experiment, after pre-heat treatment process, the increased antioxidant extract showed 41% of DPPH radical scavenging activity. The remarkable antioxidant activity of the produced extract will become useful in creating cosmetic or health products.

• Korean Journal of Materials Research
• /
• v.19 no.4
• /
• pp.207-211
• /
• 2009

In this study, we attempted to develop a convenient aluminizing process, using Al-Ti mixed slurry as an aluminum source, to control the Al content of the aluminized layer as a result of a one-step process and can be widely adopted for coating complex-shaped components. The aluminizing process was carried out by the heat treatment on disc and rod shaped S45C steel substrates with Al-Ti mixed slurries that were composed of various mixed ratios (wt%) of Al and Ti powders. The surface of the resultant aluminized layer was relatively smooth with no obvious cracks. The aluminized layers mainly contain an Fe-Al compound as the bulk phase. However, the Al concentration and the thickness of the aluminized layer gradually decrease as the Ti proportion among Al-Ti mixed slurries increases. It has also been shown that the Al-Ti compound layer, which formed on the substrate during heat treatment, easily separates from the substrate. In addition, the incorporation of Ti into the substrate surface during heat treatment was not observed.

• Herbal Formula Science
• /
• v.15 no.1
• /
• pp.49-105
• /
• 2007

Objectives : Select and analyze the case record of dyspnea and wheezing asthma recorded in Xu Ming Yi Lei An that is the most abundant and wide in contents in existing case records that are systematic, comprehending relatively modern Traditional Chinese Medicine to secure more deep and objective basis of Traditional Chinese Medicine approach for dyspnea and wheezing asthma to analyze and review possibility for clinical application in this study. Methods: The study was conducted with the case records of dyspnea and wheezing asthma in whole Xu Ming Yi Lei An. Pattern identify and classify selected case records and again classified with deficiency syndrome and excess syndrome. Also analyzed prescriptions and herbs used in the case records. Nature of herbs and properties and flavors that were used in the case records were classified and frequency of each nature of herbs were analyzed. Applicable case records were interpreted and suggested prescriptions, pulse feelings, pattern classification were analyzed and described. Results : Among the 5254 case records stated on the complete collection, it is researched that there are 63 case records for the symptom complex of dyspnea as 1.2% of the whole case records, and the case records on the symptom complex of wheezing asthma are 14 as the 0.27% of the total examples. 63 case record examples related with symptom complex of dyspnea were pattern identified and classified. As a result, deficiency syndrome of the Kidney(33 %), deficiency syndrome of the Spleen(26.0%), Wind-Cold(12.3%), phlegm turbidity(12.3%), Heat in the Lung(8.2%), asthenia of the Lung(8.2%) were investigated as above order. 14 case record examples related with wheezing asthma were pattern identified and classified. As a result, phlegm-Heat(26.3%), upper excess and lower deficiency(26.3%), external affections Wind-Cold(15.8%), Dampness-phlegm(10.5%), Lung asthenia(10.5%), Cold phlegm(5.3%), mutual deficiency and detriment of Heart and Kidneys(5.3%) were investigated as above order. Symptom complex of dyspnea has 67.1% of deficiency syndrome, 32.9% of excess syndrome resulting more deficiency syndrome than excess syndrome. Symptom complex of wheezing asthma has 42.1 % of deficiency syndrome and 57.9% of excess syndrome resulting more excess syndrome than deficiency syndrome. In case of symptom complex of dyspnea prescription used in the case record, the order of frequency is as following. Palmijihwang-tang, Bojung-ikgitang, Yungmijihwang-tang, Ijintang, Sojaganggitang, Igongsan. In case of symptom complex of wheezing asthma prescription in the case record, Yungmijihwang-tang, Ohotang, Dodamtang were mostly used. Herbs used in case records of symptom complex of dyspnea are Ginseng Radix, Poria, Glycyrrhizae Radix, Aconiti Iateralis Preparata Radix, Atractylodis Macrocephalae Rhizoma, Dioscoreae Rhizoma, Angelicae Gigantis Radix, Rehmanniae Radix Preparat, Pinelliae Rhizoma, Zingiberis Rhizoma Recens are mostly used. Nature of herb properties used for symptom complex of dyspnea and symptom complex of wheezing asthma are herbs that are warm properties. When the symptom complex of dyspnea and the symptom complex of wheezing asthma were treated. if the patient felt tenderness at Pyesu, doctors conducted pricking blood around the opposite Pyesu or Sipseon acupoint. when the patient didn't have tenderness at Pyesu by soft press, pricking blood was performed both sidees, right and left Pyesu. In case of the treatment of symptom complex of dyspnea and symptom complex of wheezing asthma, when they got treatment, when the symptom complex of disease is severe, a doctor cauterized the opposite Pyesu while the other Pyesu felt tenderness, and decided how the above treatment is performed whether the degree of the symptom compolex of disease is severe or not. In case of the treatment of symptom complex of dyspnea and symptom complex of wheezing asthma, if the person felt tenderness at Pyesu and is caught by the Wind-Cold pathogen, slight acupuncture is treated at relevant Pyesu with Fire needling. When patient with symptom complex of dyspnea and symptom complex of wheezing asthma cannot hawk sputum up from the oral and laryngopharynx, suction method is treated. Conclusion : With this study, actual traditional and clinical pattern identification form and characteristics of symptom complex of dyspnea and symptom complex of wheezing asthma were recognized. Modern case report utilizing in clinical application need to be secured and an incurable disease asthma need to be diagnosed and improvement for treatments have to be searched through other case records.

• Journal of Haehwa Medicine
• /
• v.11 no.1
• /
• pp.163-177
• /
• 2002

This study has been carried out to investigate the cause and etiology of vertigo by referring to 47 literatures. The results were as follows ; 1. Vertigo is classified in Oriental Medicine into Exess Symptom-Complex(實證) and Deficiency Symptom-Complex(虛證). Exess Symptom-Complex(實證) is caused by flare-up the fire of the liver(肝陽上亢), phlegm-heat(痰火) and exogenous pathogenic factors(外邪). Deficiency Symptom-Complex(虛證) is caused by insufficiency of the yin of the kidney(腎陰不足) and deficiency of qi and blood(氣血虛). 2. The principles of vertigo treatments are pyongganjamyang(平肝潛陽), sohwasigpung(消火息風), boiggihyul(補益氣血), geonunbiui(建運脾胃), boigsinjeong(補益腎精), chungyangnoisu(充養腦髓), joseubgeodam(燥濕祛痰), geonblhwaui(建脾和胃). 3. Various Needling Treatment Methods of vertigo in the recent Oriental Medicine are presented such as Filiform Needle(鍼刺療法), Auricular Acupuncture Therapy(耳鍼療法), Scalp Acupuncture Therapy(頭鍼療法), Cataneous Needle Therapy(皮膚鍼療法), Aqua Acupuncture Therapy(水鍼療法), etc.

• Journal of the Korean Society for Heat Treatment
• /
• v.36 no.3
• /
• pp.161-173
• /
• 2023

This study investigated the effects of K_N and process time on the formation of a compound layer at a nitriding temperature of 540℃ for SCR420H material. As a result of controlled nitriding from 3 h to 20 h at K_N 1.2 atm^-1/2, compound layers were formed up to about 10 ㎛, and an effective hardening depth of about 460 ㎛ was obtained. Initially, an ε+γ' complex phase was formed, and the phase fraction changed over time, and finally, the fraction of ε phase decreased to less than 1%. With higher K_N, the compound thickness increased, a pore layer was formed on the surface, and the surface hardness decreased. By applying the controlled nitriding process, it was possible to produce annulus gears with a compound thickness of 12.8 ㎛ and an ε phase of 5% or less. The annulus gears made through controlled nitriding were mounted on a 6-speed transmission and tested for durability. As a result, the durability test of 250,000 km was satisfied, and the transmission efficiency was also confirmed to be expected.

• Fibers and Polymers
• /
• v.3 no.2
• /
• pp.60-67
• /
• 2002

In the present study, the fluorescence behavior ova phenylethynyl-terminated imide (LaRC PETI-5) resin, a bismaleimide (BMI) resin, and various LaRC PETI-5/BMI blends with different blend compositions has been characterized as a function of heat-treatment temperature, using a steady-state fluorescence technique with a front-face illumination method far solid-state films. It is observed that there are distinguishable changes in the spectral shape, size, and position of fluorescence with varying heat-treatment temperature in the pure and blend samples. The result is qualitatively explained in terms of charge transfer complex formation as well as microenvironmental change with local mobility and viscosity occurring in the LaRC PETI-5, BMI, and their blends during the cure process. The result also implies that a steady-state fluorescence technique may be a useful tool to understand the processing conditions of polyimides and their blends in the film form on the basis of their thermo-photophysical responses.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.42-45
• /
• 2007

Recrystallization behavior during ingot-breakdown process of Alloy 718 was investigated with finite element analysis and experimental approaches. In order to analyze microstructural changes during the cogging process of an Alloy 718 ingot, the side-pressing and heat treatment tests were performed at different temperatures and ram speed. From the side-pressing and heat treatment test results, it was found that microstructural changes during hot forging of Alloy 718 ingot greatly influenced on a close interaction between dynamic and static-recrystallization behaviors. A recrystallization model of Alloy 718 was used to predict the complex microstructural variation during continuous heating and forging processes of the cogging, and the predicted grain size and its distribution were compared with the actual cogged Alloy 718 billet.

• Korean journal of food and cookery science
• /
• v.32 no.3
• /
• pp.270-278
• /
• 2016

Purpose: We have investigated for the purpose of studying change of vitamins and minerals in frequently used vegetables by low moisture cooking method. Methods: Vitamin B complex, vitamin C and mineral (Mg, Ca, K, Zn, Fe) contents are analyzed in vegetables such as spinach, cabbage, bean sprouts and carrot which are heat-treated with degrees of water contents. Low moisture cooking method represents heat-treated vegetable (LM experiment group) with 25 wt.% water content for the vegetable weight while general blanching method includes heat-treated vegetable (GB experiment group) with 500-1,000 wt.% water content for the vegetable weight. Results: Retention rate of vitamin B1 (thiamin) in the LM experiment group is relatively high (87.50-95.68%) and dosen't show considerable differences from raw vegetables. On the other hand, the retention rate of vitamin $B_1$ in GB group's cabbage and spinach dramatically decreased to 19.46-25.00%. Retention rate of vitamin B2 (riboflavin) is sustained stably in LM experiment group (75.00-87.50% in bean sprouts, cabbage and spinach), represents that low moisture cooking method has relatively higher contents in vitamin $B_2$. The LM experiment group has 71.43-85.71% on retention rate of niacin while the GB group shows relatively lower niacin (57.14-64.58%), represents conflicting results from the general idea that vitamin $B_3$ is relatively stable in heat treatment and blanching. Retention rate of pantothenic acid is considerably higher in both LM and GB experiment group, indicates vitamin pantothenic acid is relatively stable in the various cooking condition such as amount of water and heat treatment. In the experiment under various water contents, vitamin C is not detected in both bean sprouts and carrots, while the contents in cabbage and spinach are 19.87 mg/100 g and 26.65 mg/100 g respectively. In the same experiment, the retention rate of Vitamin C in LM experiment group (91.65%, 92.23%) is considerably higher than GB group (58.08%, 61.61%). Retention rate of Mg, K, Fe in the LM experiment group is relatively higher than GB group. Conclusion: Resultingly, the observations suggests that minimum water quantity and minimum heat treatment processes should be established in cooking vegetables which have soluble vitamins and minerals.

• Journal of computational fluids engineering
• /
• v.17 no.4
• /
• pp.16-23
• /
• 2012

Current display manufacturing processes apply thermal treatment of glass backplanes widely for hydrogen degassing, crystallization of thin-films, tempering, forming, and precompaction. Estimation of the characteristics of transient heating stages and thermal non-uniformities on a single glass substrate or in a stack of glasses are extremely helpful to understand non-homogeneity of mechanical and electronic features of nano/micro structures of end products. Based on simple heat transfer models and using an electric muffle furnace, temperature variations in a glass stack were predicted and measured for glass backplanes of $1.5{\times}1.85m^2$ in size and 0.7 mm in thickness. Except for the period of putting glass backplanes into the furnace, thermal radiation was the major heating mechanism for the treatment and theoretical predictions agreed well to the experimental temperatures on the backplanes. Using the theoretical model, thermal fields for a glass stack of glass-size, $2.2{\times}2.5m^2$, and of the number of sheets, 1 to 12, were calculated for practical design and manufacturing of the muffle furnace for large-scale displays, e.g. up to $8^{th}$ generation.