• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.4
• /
• pp.346-351
• /
• 2014

Suction dentures enhance retention and support by forming negative pressure temporarily at the internal surface of denture base at times of swallowing and chewing because the areas surrounding the denture flanges are sealed by mobile mucosa. In this case, an 81-year-old male visited for new dentures. Considering the high expectations for retention and masticatory efficiency of dentures, fabricating complete dentures with suction dentures was planned. Preliminary impression was taken without applying pressure on retromolar pad area and diagnostic cast was fabricated. Afterwards, individual tray was made and final impression was taken, at the same time, gothic arch tracing was done to acquire centric relation and vertical dimension. Then, anatomic teeth were placed on maxilla and non-anatomic teeth were placed on mandible forming lingualized occlusion. Consequently, restoring a complete edentulous patient with complete dentures using mandibular suction denture resulted in recovering satisfying retention and function.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.3
• /
• pp.301-312
• /
• 1999

The purpose of this study was to compare the accuracy of currently used elastomeric impression materials for complete arch impression taking. Five elastomers (Impregum, Permlastic, Express, Extrude, Examix) and one Irreversible hydrocolloid (Aroma-fine) were tested. For each material, 5 impressions were made of stainless steel model to which five tapered posts were attached. Custom trays were used for polyether and polysulfide impression materials, and putty/wash two step technique was used for addition polyvinylsiloxane impression materials. Improved stone mod els were poured to all impressions. Accuracy of the materials was assessed by measuring ten distances on stone dies poured from impressions of the master model. All measurements for master and improved stone models were made with three dimensional measuring machine. The results were as follows 1. The dimensional accuracy of polyether, extrude, and examix were significantly superior to poly-sulfide, exress, and alginate in reproducing full arch mode (p<0.05) 2. There were no statistical differences in dimensional accuracy for full arch impression between polyether extrude and examix (p>0.05). 3. there were no statistical differences in dimensional accuracy between polysulfide, express, and alginate(p>0.05). 4. There were no statistical differences between addition polyvinyl siloxane materials (p>0.05) 5. There were no statistical differences between anterior-posterior and lateral dimensional changes of all impression materials (p>0.05).

• The korean journal of orthodontics
• /
• v.47 no.2
• /
• pp.100-107
• /
• 2017

Objective: To analyze the long-term changes in maxillary arch widths and buccal corridor ratios in orthodontic patients treated with and without premolar extractions. Methods: The study included 53 patients who were divided into the extraction (n = 28) and nonextraction (n = 25) groups. These patients had complete orthodontic records from the pretreatment (T1), posttreatment (T2), and postretention (T3) periods. Their mean retention and postretention times were 4 years 2 months and 17 years 8 months, respectively. Dental models and smiling photographs from all three periods were digitized to compare the changes in three dental arch width measurements and three buccal corridor ratios over time between the extraction and nonextraction groups. Data were analyzed using analysis of variance tests. Post-hoc multiple comparisons were made using Bonferroni correction. Results: Soft-tissue extension during smiling increased with age in both groups. The maximum dental width to smile width ratio (MDW/SW) also showed a favorable increase with treatment in both groups (p < 0.05), and remained virtually stable at T3 (p > 0.05). According to the MDW/SW ratio, the mean difference in the buccal corridor space of the two groups was $2.4{\pm}0.2%$ at T3. Additionally, no significant group ${\times}$ time interaction was found for any of the buccal corridor ratios studied. Conclusions: Premolar extractions did not negatively affect transverse maxillary arch widths and buccal corridor ratios. The long-term outcome of orthodontic treatment was comparable between the study groups.

• Archives of Plastic Surgery
• /
• v.37 no.1
• /
• pp.59-66
• /
• 2010

Purpose: In the finger, there are three major palmar arches in the arterial system. The location of this arches are constant. The middle and distal transverse arches are consistently large (almost 1 mm) and may be used for arterial vessel repairs either proximally or distally, depending on the length and direction needed. This paper describes our experiences in reconstruction and replantation of the finger using rerouting the transverse digital palmar arch. Methods: 31 patients with injuries according to our classification were treated from March of 2005 to October of 2008. In this study the authors subdivided injuries into those with amputation distal to the insertion of the flexor digitorum profundus (Class I, 31 fingers); those with amputation distal to the insertion of the flexor digitorum superficialis (Class II, 4 fingers). Replantation was performed using the artery-only technique with neither vein nor nerve repair. Because the artery has been damaged, it is still possible to make a direct suture by transposing the arterial arch in an inverted Y to I arterial configuration or converting the arch. Venous drainage was provided by an external bleeding method with partial nail excision, medical leech, and repaired margin. Results: The success rate was 87% (n=27) in class I and 75% (n=4) in class II. The authors conclude that crushing and complete avulsion injuries & amputations are salvageable, with acceptable functional results in select patients, especially those with amputation distal to the insertion of the flexor digitorum superficialis. Conclusion: We performed replantation and reconstruction with only-arterial transposing anastomosis successfully, resulting in good recovery of aesthetic and functional outcome. Three major digital palmar arches, especially distal two branches, give us additional treatment options. In the finger replantation and reconstructive techniques using rerouting healthy the transverse digital palmar arch increase the survival rate of the finger.

• Archives of Plastic Surgery
• /
• v.38 no.2
• /
• pp.161-165
• /
• 2011

Purpose: Zygomaticomaxillary complex (ZMC) fracture is one of the most common facial injuries after facial trauma. As ZMC composes major facial buttress, it is a key element of the facial contour. So, when we treat these fractures, the operator should have a concern with the symmetry to restore normal appearance and function. But sometimes, unfavorable results may occur. The aim of this study is to analyze the unsatisfied midfacial contour after ZMC fractures reduction retrospectively and to point out the notandum. Methods: 369 patients, treated for fractures of the ZMC were included in the study. After the operation, such as open reduction and internal fixation (ORIF with titanium or absorbable materials), open reduction, and closed reduction, midfacial contour was evaluated with plain films and 3-dimensional computed tomography. And unfavorable asymmetric midfacial contours were correcterd by secondary correction and re-evaluated. Gross photographs were obtained at outpatient clinic. Results: Total of 38 patients had got a facial asymmetry and among of them 24 patients were treated secondary revisional ORIF operations for correction of unfavorable result of after primary reduction. Two of them had received tertiary operations, three patients had got osteotomy more than after one year and six patients had got minor procedures. The etiology of asymmetry were lateral displaced simple fracture of arch (n=2), lateral displaced comminuted fracture of arch (n=6), comminuted arch fracture combined posterior root fracture (n=9), and communited arch and body fracture (n=12), severely contused soft tissue (n=9). After the manipulations outcomes were acceptable. Conclusion: To prevent the asymmetry in ZMC fracture reduction, complete analysis of fracture, choice of appropriate operation technique, consider soft tissue, and secure of zygoma position are important. Especially, we should be more careful about communited fracture of zygomatic body and lateral displacement, root fracture of zygomatic arch. Because they are commom causes that make facial asymmetry. To get optimal result, ensure the definite bony reduction.

• The korean journal of orthodontics
• /
• v.47 no.1
• /
• pp.21-30
• /
• 2017

Objective: The aim of this study was to investigate the three-dimensional (3D) position of the center of resistance of 4 mandibular anterior teeth, 6 mandibular anterior teeth, and the complete mandibular dentition by using 3D finite-element analysis. Methods: Finite-element models included the complete mandibular dentition, periodontal ligament, and alveolar bone. The crowns of teeth in each group were fixed with buccal and lingual arch wires and lingual splint wires to minimize individual tooth movement and to evenly disperse the forces onto the teeth. Each group of teeth was subdivided into 0.5-mm intervals horizontally and vertically, and a force of 200 g was applied on each group. The center of resistance was defined as the point where the applied force induced parallel movement. Results: The center of resistance of the 4 mandibular anterior teeth group was 13.0 mm apical and 6.0 mm posterior, that of the 6 mandibular anterior teeth group was 13.5 mm apical and 8.5 mm posterior, and that of the complete mandibular dentition group was 13.5 mm apical and 25.0 mm posterior to the incisal edge of the mandibular central incisors. Conclusions: Finite-element analysis was useful in determining the 3D position of the center of resistance of the 4 mandibular anterior teeth group, 6 mandibular anterior teeth group, and complete mandibular dentition group.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.6
• /
• pp.591-601
• /
• 2008

STATEMENT OF PROBLEM: The improvement in oral function and comfort from the dental implant appears to depend on the particular type of implant support used with the denture. The number and positioning of implants have an influence on the force transfer and subsequent stress distribution around implants. Nevertheless, a quantitative comparison has not been made between the types of implant prosthesis used with different materials compared to conventional complete denture. PURPOSE: The objective of this study is to assess the masticatory performance, bite force and impact of two different type of implant supported prostheses on oral health-related quality of life compared to conventional complete denture with GOHAI, validated oral-specific health status measures, the sieving method, and the Prescale Dental System. MATERIAL AND METHODS: From the years 1999 to 2006, a total of 30 completely edentulous patients in a single arch were selected from the Yonsei University Dental Hospital, Department of Prosthodontics and Implant Clinic in Seoul, S. Korea. Patients were divided into 3 groups of 10 each. Group HR was restored with fixed-detachable hybrid prostheses with resin teeth. Group FP had fixed dentures with porcelain teeth while Group CD had a complete denture. The masticatory performance was compared between 3 groups. RESULTS: The results showed a significant improvement in oral health-related quality of life with dental implants compared to a conventional denture in GOHAI comparison. Overall, implant prostheses showed a higher masticatory performance ($S_{50}$) and maximum bite force compared with conventional dentures (P < .05) but no differences between different implant supported prostheses (P > .05). CONCLUSION: Within the limitation of this study, the numbers of implant and material of implant prostheses does not appear to impact patient satisfaction, masticatory performance or bite force.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.2
• /
• pp.152-159
• /
• 2016

Implant fixed prosthesis for the complete edentulous maxilla provides significant benefits in the aspects of functions and esthetics compared with the conventional denture. Implant supported fixed prosthesis are totally supported by implant, and thus stabilizes the prosthesis to the maximum degree as possible. Also, the improved retention and stability of fixed prosthesis enhance patients' psychological and psychosocial health. This clinical presentation describes a maxillary full arch implant-supported fixed prosthesis in complete maxillary edentulous patient who showed vertical and horizontal alveolar bone resorption in the anterior ridge. To rehabilitate the esthetics and proper lip support, the zirconia framework was fabricated and the pink porcelain was veneered to reproduce the natural gingival tissue. After 9 months of follow up, the restorations were maintained without complications and the patient was satisfied with the restoration both functionally and esthetically.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.3
• /
• pp.224-233
• /
• 2024

The patient was a 69-year-old male who had decreased VDO and overbite of the anterior teeth due to severe teeth wear. Complete mouth rehabilitation was planned to restore esthetics and function. Due to the presence of a subgingival finish line, poor fit of the margin of the temporary crown, and insufficient oral hygiene management, gingival overgrowth and bleeding occurred in many teeth, and inaccurate impressions were taken. After dividing each arch and taking partial impressions, a transfer coping was made using pattern resin on each working model die, and after being placed on the abutment teeth, a master cast was made through pick-up impression taking to produce prosthesis. In this case, the final prosthesis produced on the second master cast were fitted in terms of proximal contact, marginal fit, vertical occlusal dimension, facial appearance, esthetics, and occlusion. After complete mouth rehabilitation, the patient was satisfied with function and esthetic appearance.

• The Journal of the Korean bone and joint tumor society
• /
• v.5 no.1
• /
• pp.76-81
• /
• 1999

Aneurysmal bone cysts are uncommon bony lesions of the spine. Approximately 3-20% of the aneurysmal bone cysts occur in the spine, predominantly in the lumbar region, but they may occur at the any level of the spine. These lesions commonly arise from the neural arch and occasionally invade the pedicle and the vertebral body. The clinical diagnosis of a spinal lesion can be very difficult in the early stages of the disease because specific symptoms and signs are usually absent or only amount to back pain. However, depending on the level of involvement and the extent of neurological compression, a wide variety of neurological symptoms and signs may appear, ranging from mild radicular symptoms to complete paraplegia or tetraplegia. Available treatment options include complete excision or curettage of the lesion with bone graft, but where excision cannot be achieved, low dose radiation or arterial embolization may be used. We report a case of aneurysmal bone cyst in the pedicle of the T10 spine with nonstructural scoliosis of $40^{\circ}$ Cobb's angle which was treated successfully with only curettage of the lesion.