• 동굴
• /
• 제71호
• /
• pp.5-11
• /
• 2006

A theoretical investigation of the solid phase mechanochemical synthesis of nano sized target product on the basis of dilution of the initial powdered reagent mixture by another product of an exchange reaction is presented. On the basis of the proposed 3 mode particle size distribution in mechanically activated mixture, optimal molar ratios of the components in mixture are calculated, providing the occurrence of impact friction contacts of reagent particles and excluding aggregation of the nanosized particles of the target reaction product. Derivation of kinetic equations for mechanochemical synthesis of nanoscale particles by the final product dilution method in the systems of exchange reactions is submitted. On the basis of obtained equations the necessary times of mechanical activation for complete course of mechanochemical reactions are designed. Kinetics of solid phase mechanosynthesis of nano TlCl by dilution of initial (2NaCl+$Tl_2SO_4$) mixture with the exchange reaction product (diluent,$zNa_2SO_4$, z=z*=11.25) was studied experimentally. Some peculiar features of the reaction mechanism were found. Parameters of the kinetic curve of nano TlCl obtained experimentally were compared with those for the model reaction KBr+TlCl+zKCl=(z+1) KCl+TlBr (z=z1*=13.5), and for the first time the value of mass transfer coefficient in a mechanochemical reactor with mobile milling balls was evaluated. Dynamics of the size change was followed for nanoparticle reaction product as a function of mechanical activation time.

• 한국자동차공학회논문집
• /
• 제18권2호
• /
• pp.97-103
• /
• 2010

The four combustion stages in a diesel engine have close correlation among them. Especially, the ignition delay period has significant effect on the following combustion stage. And the period is also one of inevitable combustion processes in the diesel engine. For example, the diesel knocking is a well-known phenomenon due to the long ignition delay period. The interval of the ignition delay period is affected by the mixture formation process in the cylinder. However, in the case of the D.I. diesel engine, the available duration to make the mixture formation of air-fuel is very short. In addition, the means of the mixture formation mainly depends on the injection characteristics and properties of the fuel. It is difficult to make complete mixture. Therefore, an early stage of combustion is violent, which leads to the weakness of noise and vibration. In this study, using the visible engine, we measured the ignition delay period by photo sensor which detect occurrence of flame and presented the factors of the injection characteristics such as kinds of injection system, the injection pressure and the injection timing. The relation between the ignition delay period and cylinder pressure diagram which was concurrently obtained was also estimated.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.405-406
• /
• 2005

A theoretical investigation of the solid-phase mechanochemical synthesis of nano-sized target product on the basis of dilution of the initial powdered reagent mixture by another product of an exchange reaction is presented. On the basis of the proposed 3-mode particle size distribution in mechanically activated mixture, optimal molar ratios of the components in mixture are calculated, providing the occurrence of impact-friction contacts of reagent particles and excluding aggregation of the nanosized particles of the target reaction product. Derivation of kinetic equations for mechanochemical synthesis of nanoscale particles by the final product dilution method in the systems of exchange reactions is submitted. On the basis of obtained equations the necessary times of mechanical activation for complete course of mechanochemical reactions are designed. Kinetics of solid phase mechanosynthesis of nano-TlCl by dilution of initial (2NaCl + $Tl_2SO_4$) mixture with the exchange reaction product (diluent, $zNa_2SO_4$, $z=z^*=11.25$) was studied experimentally. Some peculiar features of the reaction mechanism were found. Parameters of the kinetic curve of nano-TlCl obtained experimentally were compared with those for the model reaction KBr + TlCl + zKCl = (z + 1) KCl + TlBr ($z=z_l^*=13.5$), and for the first time the value of mass transfer coefficient in a mechanochemical reactor with mobile milling balls was evaluated. Dynamics of the size change was followed for nanoparticle reaction product as a function of mechanical activation time.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권5호
• /
• pp.683-689
• /
• 2014

This study examined carcass and meat quality parameters in growing/finishing pigs fed unconventionally versus the concentrate-based system. Ninety-six, 12 wk old pigs ($34{\pm}SD0.3kg$) were randomly divided into three groups, assigned to one of the three dietary treatments: standard complete concentrate mixture, conventional (C diet); unconventional, steamed potato-green forage-concentrate based diet (U diet), and unconventional basal diet+herbage mix (UH diet). Pigs fed U diet showed lower dressing percentage, meatiness, loin eye area, and weight of pork neck ($p{\leq}0.05$), but their carcasses were significantly ($p{\leq}0.05$) longer and had increased backfat depth ($p{\leq}0.05$). There was no impact of the diet on the meat content of dry matter, crude ash, acidity, and colour parameters of m. longissimus. Unconventional feeding significantly ($p{\leq}0.05$) elevated water the holding capacity of m. longissimus and slightly improved the sensory attributes analysis of meat. The addition of herbs resulted in increased loin eye area ($p{\leq}0.05$), decreased fat content ($p{\leq}0.05$) in m. longissimus, and tended to improve some sensory attributes of meat. There were significant gender differences in response to all diets. There were significant diet${\times}$sex interactions for some measured variables, but there were no clearly identifiable trends with regard to any specific carcass or meat parameters. Feeding unconventional diet to pigs may offer better culinary attributes of the meat, and improve some technologically important characteristics of pig carcass, but may negatively affect some carcass or meat parameters.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권2호
• /
• pp.187-191
• /
• 2017

Objective: An experiment was conducted to examine the effect of dietary supplementation of dried and ground foliage of black gram (Vigna mungo L.) on feed intake and utilization, and production performance of crossbred lactating cows. Methods: Eighteen lactating crossbred (Bos taurus${\times}$Bos indicus) cows (body weight $330.93{\pm}10.82kg$) at their second and mid lactation (milk yield $6.77{\pm}0.54kg/d$) were randomly divided into three groups of six each in a completely randomized block design. Three supplements were formulated by quantitatively replacing 0, 50, and 100 per cent of dietary wheat bran of concentrate mixture with dried and ground foliage of black gram. The designated supplement was fed to each group with basal diet of rice straw (ad libitum) to meet the requirements for maintenance and milk production. Daily feed intake and milk yield was recorded. A digestion trial was conducted to determine the total tract digestibility of various nutrients. Results: The daily feed intake was increased (p<0.05) with the supplementation of black gram foliage. Although the digestibility of dry matter, organic matter, crude protein, and ether extract did not vary (p>0.05), the fibre digestibility was increased (p<0.05), which ultimately improved (p<0.05) the total digestible nutrients content of composite diet. Although, the average milk yield (kg/animal/d) and composition did not differ (p>0.05) among the groups, milk yield was increased by 10 per cent with total replacement of wheat bran in concentrate mixture with of black gram foliage. The economics of milk production calculated as feed cost per kg milk yield (INR 10.61 vs 7.98) was reduced by complete replacement of wheat bran with black gram foliage. Conclusion: Black gram foliage could be used as complete replacement for wheat bran in concentrate mixture of dairy cows in formulating least cost ration for economic milk production in small holders' animal production.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권3호
• /
• pp.374-379
• /
• 2003

Four rumen fistulated Murrah buffaloes were used to study the effect of four diets differing in roughage to concentrate ratio on rumen biochemical changes, microbial enzyme profile and in sacco degradability of feed in a $4{\times}4$ Latin Square design. The animals were fed four diets consisting of 80:20, 70:30, 60:40 and 50:50 ratios of wheat straw and concentrate mixtures, respectively. Wheat straw and concentrate mixture were mixed with water (0.6 l/kg feed) and complete feed mixture was offered to the animals at 8:00 h and 16:00 h in two equal parts. The variation in pH of rumen liquor (difference of maximum and minimum during 0-8 h post feeding) increased with increasing level of concentrate mixture in the diet. There was no effect of diet composition on volatile fatty acids, total nitrogen and trichloro-acetic acid precipitable nitrogen in the rumen liquor, but ammonia nitrogen increased with increasing level of concentrate mixture in the ration. Major portions of all fibre degrading enzymes were present in the particulate material (PM) of the rumen contents, but protease was absent in PM fraction. The activities of micro-crystalline cellulase, acetyl esterase and protease increased with increase in the level of concentrate mixture, but the activities of other enzymes (carboxymethylcellulase, filter paper degrading activity, xylanase, $\beta$-glucosidase and $\beta$-xylosidase) were not affected. The in sacco degradability and effective degradability of feeds increased with increasing level of concentrate mixture in the ration.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권11호
• /
• pp.1572-1576
• /
• 2003

A growth trial of 180 days was conducted on 18 crossbred calves (6-9 months, $73.48{\pm}6.52kg)$ by randomly allotting to two complete diets and a conventional diet (6 in each group). The complete diets were formulated containing 40 per cent cotton straw, one processed in mash form and other subjected to expander-extruder pelletization (EEP). These two complete diets were compared with conventional system of feeding under which concentrate mixture and cotton straw were fed separately in a 60:40 ratio. The calves on EEP complete diet consumed more (p<0.01) DM in comparison to other two groups. The DMI per 100 kg body weight was similar among all the diets. The ADG was significantly (p<0.01) higher in calves fed EEP complete diets (815.4 g) followed by mash (627.0 g) in comparison to conventional diet (464.9 g). The DM intake per kg metabolic body weight was higher (p<0.01) on complete diet than conventional diet. The intakes of DCP (p<0.05), TDN (p<0.01), and ME (p<0.01) per kg metabolic body weight were significantly higher on EEP complete diet in comparison to mash and conventional diet. The water intake per kg DM intake was comparable among all the diets. The efficiency of DM utilisation was higher p (<0.05) on EEP complete diet (5.84) in comparison to conventional diet (7.41), whereas on mash diet it was intermediate (6.68). The efficiency of DCP utilization was similar in mash and EEP complete diet fed groups, which was higher (p<0.05) than that of the conventional diet. Expander-extrusion though increased the cost of production it reduced the cost of feed per unit live weight gain by 12.28% in comparison to its mash form and by 16.76% when concentrate and cotton straw were fed separately. The results indicated that blending of cotton straw along with concentrates in a complete diet increased the palatability of the straw in comparison to conventional system and expander extruder processing of cotton straw based complete diet gave better growth performance and may form an economic ration for growing crossbred calves.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2007년도 제34회 KOSCO SYMPOSIUM 논문집
• /
• pp.37-44
• /
• 2007

A nickel foam, one of metal foams was seleced as a catalyst support instead of conventional ceramic materials. $Al_2O_3$ was coated on the surface of nickel foam to increase the surface area. $Al_2O_3$ coating process was based on sol-gel process. SEM image was obtained and $Al_2O_3$ coverage was confirmed. Combustion experiments were carried out using SUS combustor and $H_2$/air mixture. Temperatures were measured with different equivalence ratios and $H_2$ flow rates. $H_2$ conversion rates were calculated by the analysis of product gas using gas chromatography. Catalytic combustion of $H_2$ was complete and stable with Pt/$Al_2O_3$ coated nickel foam and influences of water vapor were confirmed during the beginning of combustion.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.449-452
• /
• 2004

“Flameless combustion” of lean to ultra lean mixtures, supported by high-temperature burned gas, can resolve the dilemma between complete combustion versus ultra-low NOx emissions in gas turbine combustors. The characteristics of NOx emissions and combustion in “lean-lean” two-stage combustion were investigated for fuel vapor and droplets / air mixture jets injected from the main injection tube that was placed perpendicular to the combustor wall into the primary hot burned gas prepared by combustion of lean mixtures on a perforated flame holder. The present results clearly show that the ultra-low NOx combustion supported by the reaction of lean mixtures well mixed with the hot burned gas from the primary stage is much more advantageous in achieving ultra-low NOx emissions while maintaining high combustion efficiency.

• ETRI Journal
• /
• 제38권3호
• /
• pp.579-588
• /
• 2016

To improve the ability to determine a vehicle's movement information even in a challenging environment, a hybrid approach called non-Gaussian square rootunscented particle filtering (nGSR-UPF) is presented. This approach combines a square root-unscented Kalman filter (SR-UKF) and a particle filter (PF) to determinate the vehicle state where measurement noises are taken as a finite Gaussian kernel mixture and are approximated using a sparse Gaussian kernel density estimation method. During an outage-free GPS period, the updated mean and covariance, computed using SR-UKF, are estimated based on a GPS observation update. During a complete GPS outage, nGSR-UPF operates in prediction mode. Indeed, because the inertial sensors used suffer from a large drift in this case, SR-UKF-based importance density is then responsible for shifting the weighted particles toward the high-likelihood regions to improve the accuracy of the vehicle state. The proposed method is compared with some existing estimation methods and the experiment results prove that nGSR-UPF is the most accurate during both outage-free and complete-outage GPS periods.