• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.479-479
• /
• 2011

Flexible inverters based on complementary thin-film transistor (CTFTs) are important because they have low power consumption and other advantages over single type TFT inverters. In addition, integrated CTFTs in flexible electronic circuits on low-cost, large area and mechanically flexible substrates have potentials in various applications such as radio-frequency identification tags (RFIDs), sensors, and backplanes for flexible displays. In this work, we introduce flexible complementary inverters using pentacene and amorphous indium gallium zinc oxide (IGZO) for the p-channel and n-channel, respectively. The CTFTs were fabricated on polyimide (PI) substrate. Firstly, a thin poly-4-vinyl phenol (PVP) layer was spin coated on PI substrate to make a smooth surface with rms surface roughness of 0.3 nm, which was required to grow high quality IGZO layers. Then, Ni gate electrode was deposited on the PVP layer by e-beam evaporator. 400-nm-thick PVP and 20-nm-thick ALD Al2O3 dielectric was deposited in sequence as a double gate dielectric layer for high flexibility and low leakage current. Then, IGZO and pentacene semiconductor layers were deposited by rf sputter and thermal evaporator, respectively, using shadow masks. Finally, Al and Au source/drain electrodes of 70 nm were respectively deposited on each semiconductor layer using shadow masks by thermal evaporator. Basic electrical characteristics of individual transistors and the whole CTFTs were measured by a semiconductor parameter analyzer (HP4145B, Agilent Technologies) at room temperature in the dark. Performance of those devices then was measured under static and dynamic mechanical deformation. Effects of cyclic bending were also examined. The voltage transfer characteristics (Vout- Vin) and voltage gain (-dVout/dVin) of flexible inverter circuit were analyzed and the effects of mechanical bending will be discussed in detail.

• 대한약침학회지
• /
• 제21권2호
• /
• pp.126-131
• /
• 2018

This study investigates the effect of a combination of homeopathic medicine and electro- acupuncture in two patients with breast cancer and severe liver disease who could not receive standard anaesthesia therapy due to liver problems. Specifically, measurable and quantifiable parameters were used to evaluate whether an integrated approach-consisting of electro- acupuncture and a homeopathic medicine diluted above Avogadro's limit (that is, above a potency of 12CH) during the pre-surgical, surgical and post-surgical phases -can improve general well-being of a patient undergoing breast cancer surgery. In breast cancer surgery, we employed an integrated approach consisting of induction with hypnotics and muscle relaxants, followed by maintenance with anaesthetic gas, combined with a homeopathic treatment (Arnica montana 15CH and Apis mellifica 15CH) before and after surgery and an electro- acupuncture treatment performed in the pre- and post-surgical phases without any analgesic/pain relieving medications. Both of the patients treated with the integrated approach improved their overall condition without need for other common pain relieving medicines. Additionally, thanks to their rapid awakening, the patients were not relocated to a protected area and the hospitalization was shorter. A multidisciplinary approach incorporating homeopathic medicine and electro-acupuncture can be a solution for patients who need or ask about a different and/or safer alternative to the standard treatment. This approach can offer a safe, much less expensive, non-invasive and viable alternative for such cases. Moreover it can be useful for an opioids free anesthesia.

• 산업경영시스템학회지
• /
• 제32권2호
• /
• pp.21-28
• /
• 2009

This research made an actual study of the Internal Control Systems on medium and small business company located on Gumi industry area. From this study, we learned that work scope, approval procedure and proof documents are well prepared, but some problem of the lack of communication has arose and it should be more complementary. Findings from this study show that the materials and purchasing processes are generally well-operated, but the information-sharing and training related to materials code are still insufficient and require more complementary systems.

• 대한토목학회논문집
• /
• 제37권3호
• /
• pp.549-559
• /
• 2017

잠재증발산($ET_P$)과 실제증발산($ET_A$) 사이의 보완관계 가설을 국내 다목적댐 유역에 적용하여, 각 유역의 기상 수문 관측자료를 기반으로 잠재 및 실제 증발산사이의 보완관계 성립을 검증하고자 하였다. 연단위 실제증발량($ET_A$)은 총강수량과 총유출량의 차이로서 간접추정하였으며, 가용수분량은 연강수량으로 대체하여 사용하였다. 이때, 팬증발량 보정에 사용된 팬계수(kp)는 홍수기 및 비홍수기로 구분하여 $ET_{pan}$과 FAO Penman-Monteith 식으로 계산된 증발량($ET_{PM}$)의 비를 통해 산정하였다. 각 다목적댐 유역에서 관측자료 기반의 독립적으로 계산된 $ET_P$와 $ET_A$를 통해 보완관계를 산정한 결과, 대부분의 유역에서 가용수분량이 증가할수록 $ET_P$는 감소함과 동시에 $ET_A$는 증가하는 일반적인 보완관계의 패턴을 잘 보였고, 강수량의 증가에 따라 평형증발산량($ET_W$)의 수렴을 확인할 수 있었다. 하지만, 주암댐의 경우 $ET_A$가 다른 댐 유역에 비해 크게 산정되어 가용수분량이 큰 구간에서 $ET_P$를 초과하는 경우도 발생하였다. 이는 주암댐 유역의 강수량의 과다산정 혹은 유입량의 과소산정의 가능성을 보여주는 결과로 해석될 수 있다. 증발산 보완관계를 수문학적 물수지검증을 위한 기준으로 활용한다면 홍수기 다목적댐 유입량 산정의 불확실성을 제어하는데 도움이 될 것으로 기대한다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제28권6호
• /
• pp.903-910
• /
• 2015

To maintain a predominantly pasture-based system, the large herd milked by automatic milking rotary would be required to walk significant distances. Walking distances of greater than 1-km are associated with an increased incidence of undesirably long milking intervals and reduced milk yield. Complementary forages can be incorporated into pasture-based systems to lift total home grown feed in a given area, thus potentially 'concentrating' feed closer to the dairy. The aim of this modelling study was to investigate the total land area required and associated walking distance for large automatic milking system (AMS) herds when incorporating complementary forage rotations (CFR) into the system. Thirty-six scenarios consisting of 3 AMS herds (400, 600, 800 cows), 2 levels of pasture utilisation (current AMS utilisation of 15.0 t dry matter [DM]/ha, termed as moderate; optimum pasture utilisation of 19.7 t DM/ha, termed as high) and 6 rates of replacement of each of these pastures by grazeable CFR (0%, 10%, 20%, 30%, 40%, 50%) were investigated. Results showed that AMS cows were required to walk greater than 1-km when the farm area was greater than 86 ha. Insufficient pasture could be produced within a 1 km distance (i.e. 86 ha land) with home-grown feed (HGF) providing 43%, 29%, and 22% of the metabolisable energy (ME) required by 400, 600, and 800 cows, respectively from pastures. Introduction of pasture (moderate): CFR in AMS at a ratio of 80:20 can feed a 400 cow AMS herd, and can supply 42% and 31% of the ME requirements for 600 and 800 cows, respectively with pasture (moderate): CFR at 50:50 levels. In contrast to moderate pasture, 400 cows can be managed on high pasture utilisation (provided 57% of the total ME requirements). However, similar to the scenarios conducted with moderate pasture, there was insufficient feed produced within 1-km distance of the dairy for 600 or 800 cows. An 800 cow herd required 140 and 130 ha on moderate and high pasture-based AMS system, respectively with the introduction of pasture: CFR at a ratio of 50:50. Given the impact of increasing land area past 86 ha on walking distance, cow numbers could be increased by purchasing feed from off the milking platform and/or using the land outside 1-km distance for conserved feed. However, this warrants further investigations into risk analyses of different management options including development of an innovative system to manage large herds in an AMS farming system.

• 한국농공학회논문집
• /
• 제47권5호
• /
• pp.63-71
• /
• 2005

In-situ soil remediation mechanism through the vertical drains (VDs) is analyzed with numerical model as the error and complementary error function. Results from in-situ test and analysis indicate that the contaminant concentration ratio as initial one ( C/$C_0$) increases as the radius ratio ( r/R) increases from the injection well, and also increases as the depth ratio ( z/ H) increases from the top of contaminated area. The elapse time needed to attain $50\%$ and $90\%$ clean up level ($ t_{50},\;t_{90}$) increases as the radius ratio ( r/R) and the depth ratio ( z/ H) increase. As above results, the procedure of soil flushing in contaminated area using vertical drains makes progress from the top of injection well to the bottom of extraction well.

• East Asian mathematical journal
• /
• 제31권2호
• /
• pp.167-188
• /
• 2015

Formula for the area of a trapezoid is an educational material that can handle algebraic and geometric perspectives simultaneously. In this note, we will make up the expression equivalent algebraically to the formula for the area of a trapezoid, and deal with the conversion of a geometric point of view, in algebraic terms of translating and interpreting the expression geometrically. As a result, the geometric conversion model, the first algebraic model, the second algebraic model are obtained. Therefore, this problem is a good material to understand the advantages and disadvantages of the algebraic and geometric perspectives and to improve the mathematical insight through complementary activity. In addition, these activities can be used as material for enrichment and gifted education, because it helps cultivate a rich perspective on diverse and creative thinking and mathematical concepts.

• 대한안전경영과학회지
• /
• 제22권2호
• /
• pp.73-82
• /
• 2020

IEC 60079-10-1 edition 2.0, the global standard for hazardous area classification, was newly revised in 2015. There are many differences compared to the previous edition 1.0 version, first released in 2008, so it has caused confusion in the industry. In case of edition 1.0, the hazardous area extent can be derived through the mathematical formula, but in case of edition 2.0, there was the problem that the exact hazardous area extent was not known because of the mathematical formula of the plot for applying the hazardous area extent was not presented. In this study, we converted the plot introduced in edition 2.0 to CAD format and derived the plot as the mathematical equations. Through this, we suggest the hazardous area extent formula of three states (heavy gas, diffusive, jet). As the IEC committee did not provide the mathematical formula of the hazardous area extent according to the release characteristic, it is impossible to apply the exact hazardous area extent. In this study, a mathematical approach was derived for the plot introduced in edition 2.0, which can reduce the confusion of the applying hazardous area extent.

• 대한원격탐사학회지
• /
• 제8권2호
• /
• pp.105-123
• /
• 1992

A study was made on the feature extraction for non-metallic one deposits and their related geology using the Remote Sensing and Airborne Radiometric data. The area chosen is around the Haenam area, where dickite and Quarzite mines are distributed in. The geology of the area consists mainly of Cretaceous volcanics and PreCambrian metamorphic. The methods applied are study on the reflectance characteristics of minerals and rocks sampled in the study area, and the feature extraction extraction of histogram normalized images for Landsat TM and Airborne Radiometric data, and finally evaluation of applicability of some useful pattern recognition techniques for regional lithological mapping. As a result, reflectances of non-metallic minerals are much higher than rock samples in the area. However, low grade dickites are slightly higher than rock samples, probably due to their greyish colour and also their textural features which may scatter the reflectance and may be capable of capturing much hychoryl ions. The reflectances of rock samples may depend on the degree of whiteness of samples. The outcrops or mine dumps in the study area were most effectively extracted on the histogram normalized image of TM Band 1, 2 and 3, due to their high reflectivity. The Masking technique using the above bands may be the most effective and the natural colour composite may provide some success as well. The colour composite image of PCA may also be effective in extracting geological features, and airborne radiometric data may be useful to some degree as an complementary tool.

• 기술혁신연구
• /
• 제9권2호
• /
• pp.77-97
• /
• 2001

The 21st century is not only the knowledge-based society but also the unifie era for Korea. It implies that Korea should prepare for the unification, especially in the area of knowledge, science, and technology. Under this background, this paper deals with how we can prepare for the unification of South and North Korea in science and technology (S&T) area. There have been no sufficient theoretical studies in this area. This paper, therefore, argues that regional innovation system, which has been developed since the beginning of the 1990s, could be effectively applied to the S&T cooperation and unification between both Koreas. It argues that regional innovation systems can formulate sectoral innovation systems effectively, which lead to a competent national innovation system. According to this study, South and North Korean regions have complementary sectoral innovation systems that could effectively cooperate with each other. Such S&T cooperation could make a great contribution to the S&T integration between two Koreas in the future. This paper argues, therefore, that S&T cooperation between two Koreas should target the unification of South and North Korean regional innovation systems. This paper names it as the unified national innovation system.