• Journal of Power Electronics
• /
• v.16 no.2
• /
• pp.480-489
• /
• 2016

A novel hybrid carrier-based pulse width modulation (CBPWM) scheme that combines unipolar and dipolar modulations is proposed for single-phase three-level rectifiers, which are widely applied in railway traction drive systems. The proposed CBPWM method can satisfy the volt-second balancing principle in the complete modulation index region through overmodulation compensation. The modulation scheme features two modulation modes: unipolar and dipolar. The operation range limits of these modulation modes can be modified by changing the separation coefficient. In comparison with the traditional unipolar CBPWM, the proposed hybrid CBPWM scheme can provide advantageous features, such as lower high-order harmonic distortion of the line current and better utilization of switching frequency. The separation coefficient value is optimized to achieve the maximum utilization of these advantages. The experimental results verify the feasibility and effectiveness of the proposed hybrid CBPWM scheme.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.31-32
• /
• 2006

A signal conditioning circuit for capacitive sensors was developed using a commercial single chip solution. Since capacitive displacement sensors can achieve high resolution and linearity, they have been widely used as precision sensors within the range of several hundred micrometers. However, they inherently have a limitation in low frequency range and some nonlinearity characteristics and so a specially designed signal conditioning circuit is needed to handle these properties. Up to now, several companies already have succeeded in the development of the capacitive sensors system and they are commercially available in the market. In this research, to construct the signal processing circuits more easily and simply, we used a universal LVDT signal conditioner (AD698). Since the AD698 provides one chip solution for a basic signal processing including modulation and demodulation using various internal components, we can build the processing circuits successfully with minimal additional circuits: a compensation circuits for the drift caused by the bias current of OP amplifiers and a fine adjustment circuit for the elimination of nonlinearity. The signal processing circuits shows nonlinearity less than 0.05% in the comparison with a laser interferometer.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.135-136
• /
• 2006

A precise linear motion stage supported by magnetically preloaded air bearings is introduced where preloading magnetic actuators are combined with permanent magnets and coils to adjust air bearing clearance by controlling magnetic force actively. Each of the magnetic actuators has a permanent magnet generating nominal magnetic flux for required preload and a coil to perturb the magnetic force resulting adjustment of air-bearing clearance. The characteristics of porous aerostatic bearing are analyzed by numerical analysis, and analytic magnetic circuit model is driven for magnetic actuator to calculate nominal preload and variation of force due to current. A 1-axis linear stage motorized with a coreless linear motor and a linear encoder is built for verifying this design concept. With the active magnetic preloading actuators controlled with DSP board and PWM power amplifiers, the active on-line adjusting tests about the vertical, pitching and rolling motion were performed, and the result shows very good linearity.

• Health Policy and Management
• /
• v.6 no.1
• /
• pp.59-84
• /
• 1996

It is generally believed that the medical profession in Korea is an well-paid field along with legal profession. In this vein, the nursing is regarded one of well-paid profession. The actual data, however, reveals that nurses belong to low income bracket. We carefully compare the nurse's earnings with those of other professions. We selected 58 professions, which are similar in vocational characteristics and education background to nurses and conduct a regression analysis to estimate earning functions. Using the estimated coefficients, we project an optimum salary level for nurse, and compare it with the actual salary level. The estimated results show that the nurses are underpaid : their actual salary is less than the optimum level. We provide several explanations for this phenomenon : a tradition based on Confucian value, wage discrimination for women, and wage inequality among hospitals. Undercompensation will result either ratard professional development, or block the motivation for high quality of nursing care. If the current underpaying situation is not improved, a shortage of nurses along with an noticeable decline in the quality of medical services are expected. Therefore an adequate compensation for nurses must be properly assessed and addresed not only be health care authorities but also by legislators. Further research is needed to explain why there is such as wide salary inequality among nurses, and to find what cause it.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.5 s.110
• /
• pp.503-513
• /
• 2006

The duration time of aircraft noise event is also an important factor for the evaluation of civil aircraft noise, which is considered as a notable characteristic of military aircraft noise. SEL is proved as a suitable noise metric for the measuring military aircraft noise of various flight pattern considering the duration time of noise event. This study reviews whether SEL is a suitable for measuring civil aircraft noise and study shows SEL is fairly compensating the duration time of civil aircraft noise event for the evaluation of aircraft noise. Noise metric for the evaluation aircraft noise based on SEL is more appropriate than based on $L_{MAX}$ for compensating duration time of noise event either military aircraft or civil aircraft. In this reason, current formula of WECPNL based on energy average of measured $L_{MAX}$ for the evaluation of aircraft noise impact in 'Test Method of Noise and Vibration of Korea' is recommended to be amended to formula of WECPNL based on energy average of measured SEL considering compensation of noise event duration time, if WECPNL is not based on measured EPNL, a metric compensating duration time.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.319-319
• /
• 2012

현재 폭넓게 이용되고 있는 STI (Shallow Trench Isolation) 공정에서 active edge 부분에 발생하는 기생 transistor의 subthreshold hump 특성을 제어하는 연구가 활발히 이루어지고 있다. 일반적으로 STI 공정을 이용하는 MOSFET에서 active edge 부분의 얇게 형성된 gate oxide, sharp한 active edge 형성, STI gap-fill 공정 중에 생기는 channel dopant out-diffusion은 subthreshold hump 특성의 주된 요인이다. 이와 같은 문제점을 해결하기 위해 active edge rounding process와 channel dopant compensation의 implantation을 이용하여 subthresold hump 특성 개선을 연구하였다. 본 연구는 STI 공정에 필요한 wafer와 phosphorus를 함유한 wafer를 한 chamber 안에서 auto-doping하는 방법을 이용하여 subthresold hump 특성을 구현하였다. phosphorus를 함유한 wafer에서 빠져나온 phosphorus가 STI 공정중인 wafer로 침투하여, active edge 부분의 channel dopant인 boron 농도를 상대적으로 낮춰 active edge 부분의 가 감소하고 leakage current를 증가시킨다. transistor의 channel length, gate width이고, wafer#No가 클수록 phosphorous를 함유한 wafer까지의 거리는 가까워진다. wafer #01은 hump 특성이 없고, wafer#20은 에서 심한 subthreshold hump 특성을 보였다. channel length 고정, gate width를 ~으로 가변하여 width에 따른 영향을 실험하였다. active 부분에 대한 SCM image로 확인된 phosphorus에 의한 active edge 부분의 boron 농도 감소와 gate width vs curve에서 확인된 phosphorus에 의한 감소가 narrow width로 갈수록 커짐을 확인하였다.

• Journal of the Korean Society for Library and Information Science
• /
• v.37 no.4
• /
• pp.24-52
• /
• 2003

In digital environment the hallmark of the national libraries is its responsibility or function of acquiring and preserving the county´s off-line and on-line publications in term of legal deposit. But the legal deposit system based on print materials in Korea predates the digital age and requires a new legal framework. It would be a tragedy if national library was not to archive the nation´s intellectual and cultural heritage because of limitation of legal deposit system. The purpose of this paper is to analyze form of the current deposit system and to suggest a reform model for legal deposit legislation with priority given to legal scheme and elements(terms, the depositor, the depository, object of deposit, number of copies, time of deposit, compensation and fine, right of migration and free access, etc.).

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.85-87
• /
• 2008

The demand of a three phase PWM inverter for the purpose of power control or grid-connecting is increasing. This inverter is connected to a grid through an L-filter or LCL-filter to reduce the harmonics caused by switching. An LCL-filter can reduce the harmonic of a low switching frequency and generate a satisfactory level of grid side current with a relatively low-inductance than an L-filter. But the additional poles caused by the LC part affects a stability problem due to induced resonance of the system. This paper presents a compensation method using a power theory to improve performance, the designed LCL-filter system and to reduce the stability problems caused by resonance. The effectiveness of the proposed algorithm is verified by simulations.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.6
• /
• pp.15-20
• /
• 2015

Bit patterned media (BPM) is a high capacity storage system and has attracted a great deal of attention as next generation data storage. When BPM is made with high density, the space between the islands narrows, because BPM records one bit in an island. For this reason, BPM has inter-symbol interference in all directions, unlike in current storage systems where it is in only one direction. In this paper, we propose an equation for compensating two-dimensional ISI. We conduct experiments on track misregistration. When using the proposed inter-symbol interference preprocessing, the BER performance is improved, regardless of the amount of track misregistration.

• Korea Journal of Hospital Management
• /
• v.14 no.1
• /
• pp.99-122
• /
• 2009

In this study, the authors developed typologies of failures and recovery strategies in healthcare services, adopting the research framework of Kelley et al.(1993), Hoffman, et al.(1995), and Forbes et al.(2005). Data were collected form a sample of 559 respondents recruited in several regions of Korea through self-administered questionnaires. Data collection was done at hospitals and clinics respondents were visiting. The study has identified typologies of 21 failures and 10 recovery strategies in health care services. Results shows that "insufficient explanation by doctors" was the most frequent service failure followed by "insincere attitude of administrative employees" and "insincere attitude of nurses. "The type of recovery (compensation) that most of the respondents have received was apology from the healthcare service providers while the recovery that most respondents wanted to receive was sufficient explanation, suggesting that there is a significant gap between what is wanted and what is offered. Implications for healthcare service providers as well as limitations of the current study were discussed. Directions for further research were also suggested.