• ETRI Journal
• /
• 제45권4호
• /
• pp.690-703
• /
• 2023

Multistage amplifiers have become appropriate choices for high-speed electronics and data conversion. Because of the large number of high-impedance nodes, frequency compensation has become the biggest challenge in the design of multistage amplifiers. The new compensation technique in this study uses two differential stages to organize feedforward and feedback paths. Five Miller loops and a 500-pF load capacitor are driven by just two tiny compensating capacitors, each with a capacitance of less than 10 pF. The symbolic transfer function is calculated to estimate the circuit dynamics and HSPICE and TSMC 0.18 ㎛. CMOS technology is used to simulate the proposed five-stage amplifier. A straightforward iterative approach is also used to optimize the circuit parameters given a known cost function. According to simulation and mathematical results, the proposed structure has a DC gain of 190 dB, a gain bandwidth product of 15 MHz, a phase margin of 89°, and a power dissipation of 590 ㎼.

• 가정∙방문간호학회지
• /
• 제10권1호
• /
• pp.52-57
• /
• 2003

The purpose of this study was to evaluate appropriateness of home health care travel cost. For the evaluation, investigated the operating costs of vehicles used by home care nurses and then were components of home care nurses's annual salaries. Travel costs were then calculated based on actual travel expenses of home health care service. Actual data of 23 hospital-based home care agencies between July, 2002 to December, 2002 were collected for the analysis of the travel costs. The results of this study are : 1) For home visit, 65% of home care agencies turned out to be using only hospital owned cars, and 17.1% be depending purely on home care nurses' cars. On average, 1.9 cars used for home visit. 2) Out of 89 agencies, 23 agencies responded to the travel cost survey. Total maintenance cost of a car per month was 381,457 won. 3) Average per visit personal expenses of home care nurses during travel time turned out to be 7,124won assuming 8 working hours per day, 4 visits per day, and 30 minuets of travel time for each visit. 4) Total home health care travel cost per visit was 12,069 won, which was the sum of actually paid travel cost of 4,945 won and personal expenses during travel time of 7,124. In conclusion. we reckon that current compensation price of home care nurses' travel is inappropriate because total home health care travel costs of 12,069 won per visit turned out to be 2.1 times of currently prevailing standard compensation price of 5,830 per visit.

• 한국직업건강간호학회지
• /
• 제16권2호
• /
• pp.222-231
• /
• 2007

Purpose: This study aims to suggest political alternatives for nursing care costs for PCAs to provide qualitative medical benefit for patients with occupational disease by investigating present situation and problems of the nursing care cost system of Korea's Industrial Accident Compensation Insurance. Methods: Data was collected from 6 workers' accident medical corporation and 275 nurses affiliated with Korea labor welfare corporation using self reported questionnaire. Result: Research results were as follows; Character of nursing care cost of the Korea's Industrial accident Compensation Insurance changed as if it aims to support for living expenses for the family; As possible problems which could be caused under current system, administrative problems, decrease of service quality were made as objects of criticism. Some patients did not make every effort in rehabilitation to be beneficiaries continuously. Some patients were supplied with whole one PCA or all-night PCA even though they did not need as much caring as such. Conclusion: The research suggested that PCAs payment system improvement is necessary, and the presented nurses' opinion for the improvement method could be applied for policy making.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.1240-1240
• /
• 2022

Construction projects are fraught with risks from cost or other overruns to accidents along with other issues. This is true whether the relevant organization is an owner, general contractor, CM, specialty-trade contractor, or other entity. When cost issues or other issues confront arise, how should an organization proceed whether attempting to gain additional compensation in terms of cost/other damages or protecting the same against such claims if they do not appear to be warranted? Enter construction cost forensics. This presentation will focus on strategies/techniques with construction cost forensics in these areas in order to be successful. Covered techniques include those to develop and analyze claims including fundamental construction cost analysis techniques. When an unexpected event disrupts a construction project, using sound analytical methods to identify the cause and quantify the extent of the issue will be important for negotiating a fair result or for obtaining a successful outcome in arbitration or litigation. Key examples of uncovering issues via construction cost forensics will be covered in this presentation.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 춘계학술발표회논문집
• /
• pp.59-64
• /
• 2004

In this paper, the error compensation method of the low-cost IMU is proposed. In general, the position and attitude error calculated by accelerometers and gyros grows with time. Therefore the additional information is required to compensate the drift. The attitude angles can be bound accelerometer mixing algorithm and the heading angle can be aided by single antenna GPS velocity. The Kalman filter is used for error compensation. The result is verified by comparing with the attitude calculated by Attitude Heading Reference System with Micro Electro Mechanical System for a basis

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.800-802
• /
• 2006

A simple wide-viewing-angle solution of electrically controlled birefringence (ECB) LCD is proposed, which is based on a single discotic compensation film. The use of a single discotic film instead of two leads to a considerable reduction in cost while high performance is maintained.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.293-297
• /
• 1998

A method for the evaluation and the compensation of the vertical milling machine is presented. The method used a mathmatical model of thermal deformation based on temperatur variations of the machine and the environment. It follows an empirical approach and requires low cost equipment to be applied. According to this study, machine error caused by thermal deformation will be reduced to about 1/6.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.520-523
• /
• 2009

The drive towards lowering costs and increasing frame rates results in new panel designs and thereby new photomasks designs. One common way to reduce cost is to reduce the number of production steps. For this multi tone photomasks (MTM) are needed. MTMs contain more information and increases photomask placement requirements. Increasing frame rates lead to shrinking geometries. The combination of HTM and shrinking geometries drastically increases the requirements imposed on the pattern generators used to print the photomasks. New methods are therefore needed to enable future photomask manufacturing. This paper introduces three advanced image quality enhancing methods.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.819-822
• /
• 1998

A new active power filter (APF) circuit with a current compesation estimation method is proposed. The current compensation estimation method replaces a current sensor with an estimating circuit and therefore reduces the implementation cost In addition, a simple control scheme, based on the energy balance concept, is adopted to control the voltage of a DC capacitor. Therefore energy change in the DC capacitor can be compensanted in the next cycle. Since a sampling technique is used, a larger DC capacitor voltage ripple can be permissible and a relatively smaller DC capacitor can be used. The proposed method has advantages of the reduction of one current sensor, low implementation cost, and fast transient responses. The theoretical analysis and simulation results are given. The proposed control method is successfully verified by computer simulation.

• 한국경영과학회지
• /
• 제31권3호
• /
• pp.27-40
• /
• 2006

Today's customer demands in supply chains tend to change quickly, variously even in a short time Interval. The uncertainties of customer demands make it difficult for supply chains to achieve efficient inventory replenishment, resulting in loosing sales opportunity or keeping excessive chain wide inventories. Un this paper, we propose an adaptive vendor managed inventory (VMI) model for a two-echelon supply chain with non-stationary customer demands using the action-reward learning method. The Purpose of this model is to decrease the inventory cost adaptively. The control Parameter, a compensation factor, is designed to adaptively change as customer demand pattern changes. A simulation-based experiment was performed to compare the performance of the adaptive VMI model.