• Journal of Korea Water Resources Association
• /
• v.49 no.11
• /
• pp.923-930
• /
• 2016

This study was to evaluate the stream depletion from groundwater pumping in shallow aquifer using the Hunt's analytical solution (2009) which considers a two-layer leaky aquifer-stream system. From the total 2,187 cases of simulations with combinations of various aquifer and stream properties, the streamflow depletion rates divided by the groundwater pumping rate showed the low values when the stream depletion factor (SDF) is higher than 1,000-10,000, and was more sensitive to the aquitard hydraulic conductivity than the streambed hydraulic conductivity. The comparison of the Hunt's solution (2009) with the Hunt's solution (1999) of a single layer aquifer indicated that the maximum difference between the dimensionless stream depletions calculated by using both solutions is above 0.3, and the stream depletion is significantly affected by the hydraulic properties of the $2^{nd}$ layer as the SDF of the first layer increases. The Hunt's solution (2009) was applied to the real shallow groundwater well that is located in Chunju-Si, and the results revealed that the groundwater pumping has significant effects on streamflow in a short period of time, showing that the dimensionless stream depletion exceeds 0.8 within a few days. It was also found that the shallow groundwater pumping effects on stream depletion are highly dependent on the stream-well distance for the locations with high hydraulic diffusivity of $1^{st}$ layer and low vertical leakance between $1^{st}$ and $2^{nd}$ layers.

• Journal of Korea Water Resources Association
• /
• v.53 no.2
• /
• pp.89-96
• /
• 2020

Water management agencies under the Ministry of Environment produce and accumulate qualified basic data for major rivers. However, the integrated management of the river water has been weak since the artificial water circulation process, such as the intaking and drainage of agricultural water, has not been examined in the basin, which includes many agricultural land. In this study, a study was conducted on how the power usage method (operating time method) based on the running time can be applied and improved among indirect flow rate measurement methods used to investigate flow rates collected by the riverside for agricultural water purposes, and thus the resultant data of high reliability can be obtained at low cost. The operation time method is suitable for small-scale water pumping stations where it is difficult to secure real-time power supply data. The reliability of the data was verified through the correlation analysis with the actual flow rate, and it was found that the flow rate calculated by the operation time method reflecting the level of the stream to which the inlet of the pumping station is connected can be reasonably matched with the actual flow rate. In addition, it was confirmed that the investment cost at the time of initial installation of the facility was highly efficient by generating qualified flow data at low cost through comparison with direct flow rate measurement methods. If flow data is secured by applying the operation time method to large and small water farms located along the riverside, it is expected that more quantitative and integrated stream water management will be possible.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.7 no.2
• /
• pp.35-44
• /
• 2012

This paper provides information for decision making of the managers and the staffs of oriental medicine hospitals through the analyzing financial statement. The oriental medicine hospitals decreased total assets, total gross revenues, and increased debt. Comparison of years 2008 and 2010, oriental medicine hospital's total assets decreased, liabilities increased, total revenue decreased, and showed a continuing deficit. On the other hand, the rate of net worth of the oriental medicine hospitals were high and lower dependence on the borrowings. So the management performance of the oriental medicine hospitals as a whole were good. However some the oriental medicine hospitals were experiencing serious financial difficulties. In order to the hospitals overcome its financial difficulties, they had to rely on short-term borrowings. In consideration of the reserve fund for essential business, the transfers and the net profit ratio to total assets of the operating profit ratio to total assets were the level of commercial interest rates. But the operating profit ratio to the total assets were significantly different according to the hospitals. And 10 hospitals of the operating profit ratio to gross operating revenues were (-), they had problems with profitability. Meanwhile the total amount of capital and the equity capital of reduced hospitals increased, there were significant differences even between hospitals.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.94-98
• /
• 2005

This study was carried out to provide the geographic information based on the distribution of rice qualities and palatability in Gyeoungbuk province of Korea. The rice grain quality and environmental factors were analyzed using 513 sampling sites based on different five-agroclimtic regions of Gyeoungbuk province during three years from 2002 to 2004. In rice grain quality characteristics, the average palatability was low in South eastern coastal and Tabaek semi alpine regions as $67.6\~68.3$ and the coefficient of variation (CV) was relatively high as $6.2\~7.4\%$. The average head rice rates were low in South and Central eastern coastal regions as $87.3\~88.2\%$ and CV was high as $8.2\~8.3\%$. The average protein content was high in Central eastern coastal regions as $8.0\%$ and CV was high as $8.2\~8.3\%$. In case of palatability, the variation was differed clearly between high and low agroclimatic regions; it means that it is possible to divide the same agroclimatic region of high CV into two or three areas by CV of palatability. As the results of subdividing each existing agroclimatic regions based on the palatability, the variation of grain quality characteristics was become lower than that of existing five-agroclimatic regions. Therefore, the re-establishing of agroclimatic region based on rice grain quality was very important for precise cultivation for rice.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.8
• /
• pp.1128-1133
• /
• 2002

The whole plant of crop maize was chopped and ensiled in airtight 1-L capacity glass jars to determine the influence of residual sugar on anaerobic yeast growth and on the fermentation of lactic acid by L. buchneri in whole crop maize silage. There were a total of six treatments used in this experiment as follow: added 25 g de-mineralised water per kg chopped maize serving as control (con), 37.5 g glucose solution containing 12.5 g glucose ($g_1$), 75 g glucose solution containing 25 g glucose ($g_2$), 25 g L. buchneri suspension intended for $10^6$ cfu $g^{-1}$ (L.b.), $g_1+L.b.$ and $g_2+L.b.$ All silos were stored in the dark at $20^{\circ}C$ until end of experiment. Jars were opened on duplicates at day 2, 7, 14, 28, 56 or triplicates at day 91 after ensiling for measuring the pH, microbiological enumeration and fermentative products. Results indicated that acidification rates for all silages were very fast, no difference occurred among treatments before day 28. After day 28 the pH values for silages inoculated by L. buchneri. with or without sugar tended to increase especially for treated only with L. buchneri, resulting in higher (p<0.01) finial pH than uninoculated silages. Compared with control silage, the added sugar significantly (p<0.01) increased dry matter (DM) loss, L. buchneri enhanced (p<0.01) DM loss further at different sugar existence. Silages inoculated by L. buchneri only or in combination with sugar addition contained less (p<0.01) lactic acid than the correspondent silages without inoculation with L. buchneri. In comparison with control, ethanol production is about 3 or 6 fold higher due to addition 12.5 or 25 g glucose per kg chopped maize at ensiling. The added sugar resulted in less acetic acid concentration (p<0.01) than control, but inoculation with L. buchneri increased (p<0.01) acetic acid than correspondent uninoculated silages at different sugar levels. No butyric acid and propionic acid were found in uninoculted silages, silages inoculated with L. buchneri. produced more propionic acid, 1-propanol and butyric acid. Lactobacilli counts were not influenced by added sugar, but increased (p<0.01) with inoculation of L. buchneri. The added sugar increased significantly (p<0.01) the yeast count, whereas L. buchneri showed the contrary effect. No differences were found in the aerobic stability among all treatments. In conclusions, 1) the added sugars encourage the growth of yeast and yeasts convert extra sugar into ethanol in maize silages. 2) The added sugars and L. buchneri do not influence the aerobic stability of silages stored in anaerobic silos.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.1
• /
• pp.85-90
• /
• 2015

The objective of this study was comparison of seed yields according to different seeding rates, seeding time and application of chemical fertilizations in Yanji region of China. The experiment was conducted on commercial farmland at Yanji region in 2013. All the experimental fields were designed following randomized block design with 3 replicates. The plant spacing was applied as $65{\times}1cm$ distance. To check the effect of seeding rate, two different seeding rate, 0.2 kg/0.1ha and 0.5 kg/0.1ha were applied. The higher seed yield was observed in low seeding rate (0.2 kg/0.1ha). The application of fertilizer (mixture of N and P) showed different results following different experimental fields. However, there were little positive effects following fertilizer application into commercial farmland. When we compare seed yields between two different seeding dates, $4^{th}$ May and $29^{th}$ May, the earlier seeding date ($4^{th}$ May) showed higher seed yields. In considering these results, low seeding rate and early seeding time is important for getting high camelina seed yields.

• International Journal of Highway Engineering
• /
• v.10 no.4
• /
• pp.151-159
• /
• 2008

Performances of retroreflectivity vary place to place, according to traffic volumes and time lengths after striping, depending on pavement marking materials and colors. The present paper uses the nation wide data of retroreflectivity, which has been collected from freeways and then tries to develop the regression curve setting traffic volume and service life as independent variables and retroreflectivities as dependent variables. The DB system includes two year's measurement in $2005{\sim}2006$ over Korean freeway pavement marking at an interval of three months for the period. The mobile measurement system, a laserlux, was employed for the purpose. The DB has provided a lot of information about materials and performance of the specific pavement marking such as geometric features, traffic volumes, material characteristics and the installation date. This study provides the comparison of pavement marking performances under diversified conditions. Based on accumulated pavement marking performances, this study provides performance curves based on the diversified factors. The goal of the retroreflectivity modeling is to develop equations that can be used to estimate an average retroreflectivity of pavement markings as a function time since application and traffic volume. After representing the variation of retroreflectivities and estimating regression curves by linear, exponential, logarithmic and power function, the regression curve which had the highest coefficient of determination and the value similar to the last field measurement was regarded as the retroreflectivity decay model. As a result of verification, the decay model showed the signification within the 90% confidence level and especially showed the clear relation with field data according to increase of cumulative vehicle exposure. Accordingly, these models can be used to determine service lives, retroreflectivity degradation rates, and retroreflectivity of new markings.

• Journal of KIISE:Software and Applications
• /
• v.29 no.4
• /
• pp.270-277
• /
• 2002

Text filtering is a task of deciding whether a document has relevance to a specified topic. As Internet and Web becomes wide-spread and the number of documents delivered by e-mail explosively grows the importance of text filtering increases as well. The aim of this paper is to improve the accuracy of text filtering systems by using machine learning techniques. We apply AdaBoost algorithms to the filtering task. An AdaBoost algorithm generates and combines a series of simple hypotheses. Each of the hypotheses decides the relevance of a document to a topic on the basis of whether or not the document includes a certain word. We begin with an existing AdaBoost algorithm which uses weak hypotheses with their output of 1 or -1. Then we extend the algorithm to use weak hypotheses with real-valued outputs which was proposed recently to improve error reduction rates and final filtering performance. Next, we attempt to achieve further improvement in the AdaBoost's performance by first setting weights randomly according to the continuous Poisson distribution, executing AdaBoost, repeating these steps several times, and then combining all the hypotheses learned. This has the effect of mitigating the ovefitting problem which may occur when learning from a small number of data. Experiments have been performed on the real document collections used in TREC-8, a well-established text retrieval contest. This dataset includes Financial Times articles from 1992 to 1994. The experimental results show that AdaBoost with real-valued hypotheses outperforms AdaBoost with binary-valued hypotheses, and that AdaBoost iterated with random weights further improves filtering accuracy. Comparison results of all the participants of the TREC-8 filtering task are also provided.

• KIEE International Transaction on Systems and Control
• /
• v.2D no.2
• /
• pp.78-91
• /
• 2002

In the thermal power plant, there are six manipulated variables: main steam flow, feedwater flow, fuel flow, air flow, spray flow, and gas recirculation flow. There are five controlled variables: generator output, main steam pressure, main steam temperature, exhaust gas density, and reheater steam temperature. Therefore, the thermal power plant control system is a multinput and output system. In the control system, the main steam temperature is typically regulated by the fuel flow rate and the spray flow rate, and the reheater steam temperature is regulated by the gas recirculation flow rate. However, strict control of the steam temperature must be maintained to avoid thermal stress. Maintaining the steam temperature can be difficult due to heating value variation to the fuel source, time delay changes in the main steam temperature versus changes in fuel flow rate, difficulty of control of the main steam temperature control and the reheater steam temperature control system owing to the dynamic response characteristics of changes in steam temperature and the reheater steam temperature, and the fluctuation of inner fluid water and steam flow rates during the load-following operation. Up to the present time, the Proportional-Integral-Derivative Controller has been used to operate this system. However, it is very difficult to achieve an optimal PID gain with no experience, since the gain of the PID controller has to be manually tuned by trial and error. This paper focuses on the characteristic comparison of the PID controller and the modified 2-DOF PID Controller (Two-Degrees-Freedom Proportional-Integral-Derivative) on the DCS (Distributed Control System). The method is to design an optimal controller that can be operated on the thermal generating plant in Seoul, Korea. The modified 2-DOF PID controller is designed to enable parameters to fit into the thermal plant during disturbances. To attain an optimal control method, transfer function and operating data from start-up, running, and stop procedures of the thermal plant have been acquired. Through this research, the stable range of a 2-DOF parameter for only this system could be found for the start-up procedure and this parameter could be used for the tuning problem. Also, this paper addressed whether an intelligent tuning method based on immune network algorithms can be used effectively in tuning these controllers.

• YAKHAK HOEJI
• /
• v.40 no.5
• /
• pp.608-615
• /
• 1996

6-[(N-3,4-Difluorophenyl)amino]-7-chloro-5,8-quinolinedione(RCK4) was tested for antifungal activities, against systemic infections with Candida albicans in normal mice. The therapeutic potential of RCK4 had been assessed in comparison with ketoconazole and fluconazole. RCK4 had $ED_{50},\;0.30{\pm}0.14$ but ketoconazole and fluconazole had $ED_{50},\;8.00{\pm}0.73,\;10.00{\pm} 0.43mg/kg$ respectively. Intraperitoneally administered RCK3 at the $ED_{50}$ for 7 days and 14 days reduced Candida albicans colony count in the kidneys and liver as well as ketoconazole and fluconazole at these $ED_{50}$. And administered RCK4 at the $ED_{50}$ for 14 days improved survival rates as well as ketoconazole. Acute oral toxicity studies of RCK4 were carried out in ICR mice of both sexes. These acute oral toxicities of RCK4 were low and $LD_{50}$ values were over 2,850mg/kg in ICR mice. The genotoxicities of RCK4 had been evaluated. RCK4 was negative in Ames test with Salmonella typhimurium and chromosomal aberration test in CHL cells. The clastogenicity was tested on the RCK4 with in vivo mouse micronucleus assay. RCK4 did not show any clastogenic effect in mouse peripheral blood and was negative in mouse micronucleus assay. These results indicate that RCK4 has no genotoxic potential under these experimental conditions.