• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.5
• /
• pp.971-980
• /
• 2023

Safety accidents and industrial accidents are constantly occurring in existing industrial sites. In addition, the probability of accidents occurring due to physical and mental fatigue of workers is increasing. Accordingly, it is required to introduce systematic management and various systems for the safety of workers. In this paper, by developing an access control system using bio-metric information at industrial sites, we develop efficient health management and access control management functions for workers. Workers are identified through face recognition for access control, and health status is determined through iris recognition. It aims to improve accuracy and develop a more efficient management system by diagnosing signs of health abnormalities through the congestion of the iris and eyes of workers. Finally, the contents of the development consist of an on-site access control system, an access control program for administrators, and a main server system that diagnoses signs of abnormal health of users.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.31 no.1
• /
• pp.39-49
• /
• 2013

Nowadays the printing market has shift from 2D(two dimension) industry to 3D(three dimension) industry, along with IT. With rapidly changing market, it's true that the effort to develop the printing materials and upgrade the printing qualities is produced actively in the country. Particularly, the differences in printing materials can often determine the quality of printings in the printability. In the case of the printability of offset, 9 items(paper, ink, order of printing, ink supply, blowing-up halftone, grey balance, key color(base color), overlap efficiency, quality at the halftone dot reproduction etc.) are usually considered as the important factors and used to estimate the printability at abroad. However, in domestic, ink-jet paper is not used for the printing/publishing by ink-jet printing for digital, but done mainly for offset printing. Because the paper of gloss coated type, which is the ink-jet paper, has high price, it's too hard to manufacture massively printing/publishing. Also, in the case of the paper of uncoated type, in spite of its reasonable price rather than the former, the type of uncoated one also has demerit that the ink-jet paper has a clear difference between the front and the back. Therefore, it's tough reality that Ink Jet paper is hardly taken advantage of as the printing/publishing. Thus, what is done in the first to print and/or publish on ink-jet paper is that the front and the back must be printed evenly, and appropriate to the printability of ink-jet. Although there're some kinds of ink-jet paper in the country, it has not been produced in true domestic production yet. In addition, thanks to the brightness of fluorescence brightening agent, the foreign product can offer the good-qualified one-time printing. But when it comes to the printing/publishing, there're difficulties that it may cause the Ocular Fatigue because of long-term exposure of the eyes to text. This research tries to find out the optimum ink-jet paper in domestic for the printing/publishing by studying on the printability of ink-jet on digital web-printing. And it also tries to look for the paper's brightness which can be reduce the possibility to cause the consumers' Ocular Fatigue.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.2
• /
• pp.178-186
• /
• 2015

Endurance time is very important indicator to estimate muscle fatigue. In the case of measuring endurance time directly, it is dangerous for subject to perform a test until the point of failure to main time force. Therefore, this paper presents the model to estimate endirance time using indirect measurements such as personal factors and anthropometrical data. Previous studies had shown that personal factors such as gender and age were not related to endurance time, but recently studies have shown that it is estimated by using independent variable or predictor such as GTA (Gravitational Torque of the horizontal, stretched arm) and MVC (Maximum Voluntary Contraction). The present study investigated variables to estimate endurance time using personal factors and anthrometrical data during isotonic contractions. Twenty five healthy subject volunteered for this study, and performed three test sessions of isotonic contraction exercises at 10~50% respectively. Afterward the correlation coefficient and p-values were compared among regression models using personal factors and anthropometrical data. The results demonstrated that multi-regression model had significant coefficient of correlation, and was useful estimate endurance time.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.4
• /
• pp.413-418
• /
• 2019

Studies are now actively underway to confirm the degree of treatment and rehabilitation of patients with brain-related diseases (dementia, schizophrenia, depression, Parkinson's disease). Among them, Transcranial magnetic stimulation (TMS) is widely used in treatment because it is a technique that is used for noninvasive brain neuron control in patients with brain disorders. It can be seen that muscle fatigue of normal people increases during Transcranial magnetic stimulation. Therefore, in this paper, our purpose is to build an EMG measurement system to measure motor neuron-induced response during transcranial magnetic stimulation and We identify a motor-neutral response system using tendency in the RMS graph. As an experimental method, the Raw Data received through the surface EMG device and analyzed by RMS technique, after the contraction and relaxation movement of the biceps brachii. As a result of the experiment, we confirmed the trend of rising RMS graph, and it will can be used to determine the self-stimulation intensity for each individual in consideration of the data of the motor-neutral response.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.7
• /
• pp.1653-1660
• /
• 2010

In this study, change of body surface temperature was measured using Digital Infrared Thermographic Imaging(DITI) to check muscle fatigue recovery & muscle pain control by magnetic stimulations. For clinical trials, subjects were divided into 3 groups : non stimulation group(NSG), electrical stimulation group(ESG) and micro magnetic stimulation group(MSG). In result, temperature differences between left and right arm surfaces were measured as much as $0.86{\pm}0.43^{\circ}C$(n=96) after the exercise, $0.78{\pm}0.12^{\circ}C$ after the electrical stimulation and $0.1{\pm}0.39^{\circ}C$ after the micro magnetic stimulation. Also after 3days, temperature differences between left and right arm surfaces were measured as much as $0.3{\pm}0.14^{\circ}C$ in the NSG, $0.05{\pm}0.21^{\circ}C$ in the ESG and $0.03{\pm}0.21^{\circ}C$ in the MSG. These data showed that the lowest temperature difference between left/right body surface was measured in MSG.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.3
• /
• pp.609-615
• /
• 2005

The effects of Zr/Ti concentration ratio in PLZT (10/y/z) thin films prepared by sol-gel method are investigated for the NVFRAM application. As Ti amount of Zr/Ti concentration ratio increases, the dielectric constants at 10 kHz decrease from 550 to 400, while the loss tangents increase from 0.028 to 0.053 and the leakage current densities at 170 kV/cm decrease from $1.64\times10^{-6}$ to $1.26\times10^{-7}\;A/cm^2$. In the results of hysteresis loops measured at $\pm170kV/cm$, the remanent polarization and the coercive field increase from 6.62 to $12.86{\mu}C/cm^2$ and from 32.15 to 56.45 kV/cm, respectively, according to the change from 40/60 to 0/100 in Zr/Ti concentration ratio. Fatigue and retention properties also improve much as the Zr/Ti concentration ratio change from 40/60 to 0/100. After applying $10^9$ square pulses with $\pm5V$, the remanent polarization of the PLZT (10/40/60) thin film decreases $50\%$ from the initial state while that of the PLZT (10/0/100) thin film decreases $28\%$. In the results of retention measurements of 10s s, the remanent polarization of the PLZT (10/0/100) thin film dec.eases only $10\%$ from the initial state, while that of the PLZT (10/40/60) thin film decreases $40\%$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8616-8625
• /
• 2015

This study was done to describe the experiences of middle-aged woman using SNS through smart phone. Data were analyzed using Colaizzi(1978)'s phenomenological method. The research participants were middle-aged woman 10 participants(age 42~52). As result of research, 75 significant statements, 22 themes, 5 themes cluster, and 2 categories of themes cluster were extracted. The 5 themes cluster are: 'space of meeting and communication', 'space of exchanging information', 'space of cultural creation', 'space of digital fatigue', 'dishonesty communication', and 2 categories of themes cluster are: 'Restructuring on positive social relationship', 'Restructuring on negative social relationship'. These results will promote understanding of middle-age woman using SNS through smartphone, and will be helpful in developing more effective nursing intervention for social relationship.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.4
• /
• pp.421-426
• /
• 2016

Fluid is normally used so that certain drug can be administered to patients for certain period of time. There are many incidents in which patients or guardians need to call upon medical staff after estimating the time of fluid injection termination. In case fluid injection is terminated during certain period such as sleeping time or others, it may cause more fatigue for either patients or guardians. Also, it may lead to ineffective work as medical staff needs to monitor the quantity of fluid several times in order to check the time of fluid injection termination. Therefore, the purpose of this study is to propose LBS system combined of minimum equipment and active RFID to monitor the level of fluid in order to solve abovementioned problems. Also, it is expected to enhance the quality of medical service with service in which real-time monitoring of fluid quantity and patient location is conducted to provide accurate information to either patients, guardians, or medical staff(nurse) so that medical staff can locate and see patients at the time of fluid injection termination.

• Korean journal of communication and information
• /
• v.31
• /
• pp.327-354
• /
• 2005

This study deals with current use of e-books through a survey of e-book audiences and a diagnosis of the development perspective of e-book audiences. In addition, we present some effective methods to promote e-books in the future. The study shows that e-book users have increased. However, e-books are not well-known to the audience. Mainly, audiences use free web sites; consequently, the use of e-books is not well-promoted. Whether people have used e-books is statistically significant in the pattern of their use and e-book audiences prospect that the future of e-books is brighter than paper books. However, people who have used e-books prospect the brighter future for e-books than people who have never used them. Therefore, we should reconsider the accessibility to e-books, promote publicity, research the reliability of the contents, reduce the price, develop various contents, change layout for better readability, and develop the screen for the less eye fatigue to promote e-books.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.11 no.1
• /
• pp.51-60
• /
• 2000

Background and Objectives : Quality of life(QOL) is a construct representing physical, mental and social well-being. QOL has been used as a device for measuring the severity of health-related condition and treatment outcomes. As the social welfare system develops, the attention to QOL increases as well. The aims of this study was to examine whether the patients with voice disorder perceived significantly more the effects of voice disorder on QOL than nonpatient group did and if any, identify the sociodemographic risk factors influencing QOL of patients. Materials and Methods : This study asked 113 adults with voice disorders who were enrolled in Voice Clinic in the Department of Otolaryngology, Kangbuk Samsung Hospital between lune 1998 and January 1999 and 111 nonpatients to complete a questionnaire designed to elicit information about the effete of voice disorders on quality of lift. The questionnaire included items concerning sociodemographic areas, voice symptoms, job, effects of voice disorders on QOL domains(work, social, psychological, physical, and communication areas), potential risk factors to exposures, familial and medical history of voice disorders. Results : The sociodemographic characteristics of the patient group are as follows : (1) 75.2% of total patient group were female and the rest were male. (2) Age of total patient group ranged from 20 to 65 years. Hoarseness was the most commonly reported complaints, followed by complaints of high note difficulties during singing and voice fatigue. The patient group perceived effects of voice disorders on the areas of work, social, psychological, physical and communication more adversely than the comparison group did (p＜0.05). QOL impairments were evaluated as a function of age, gender, education, and income, controlling other independent effects. The results were that (1) age was significantly associated with work problems and (2) gender and income were significantly associated with psychological problems. Conclusions : The findings indicated that the patients with voice disorders would perceive markedly adverse effect on all QOL domains, that is, work, social, psychological, physical, communicational areas. Therefore, the results of study suggest that lurker investigations about the nature of voice disorders, the prevention, treatment, and coping strategies are needed in the future.