• International journal of advanced smart convergence
• /
• 제9권3호
• /
• pp.227-231
• /
• 2020

Recently, the importance of user experience (UX) has been rapidly increasing. Its utilization is emphasized for development of systems, products, and services. User experience is widely used across industries including services, products, processes, society, and culture. Therefore, if it is unsatisfactory, it is likely to have a direct negative impact on the corresponding system, product, or service. The failure to analyze user experience causes significant damage to the project, which may lead to its failure or redevelopment; it is hence necessary to prioritize the verification of UX in the earliest stages of development. The requirements development stage, which is a preceding stage, is an appropriate stage for the verification of user experience because the identification of user needs is completed and prototypes can be implemented. In this paper, we proposed a systematic requirements development stage; it adds user experience verification activities to the requirements development stage, using the Honeycomb model, which is a widely used tool for verifying the overall UX. User experience verification was added to the existing requirements development activities, which consisted of three steps: model definition and requirements placement, discussions between external and internal stakeholders, and review by internal stakeholders. By easily validating the user experience through this systematic requirements development stage, we expect to minimize the damage to the project due to the failure of the user experience analysis and increase the possibility of success.

• 한국생산제조학회지
• /
• 제24권2호
• /
• pp.203-210
• /
• 2015

This paper investigates the failure of a car with a 2.5-liter CRDi engine of the Hyundai Company. The failure is caused by intermittent poor acceleration while driving. To analyze the cause, we investigated the air intake volume, the fuel injection, and the air-fuel ratio, which were determined to be normal. The brake switch signal error was discovered while analyzing the function that limits the output of the engine. While investigating the cause, we discovered the corrosion of the pins on the connector of the brake switch. We determined that it was generated by soapy water flowing in the solar film. Therefore, the cause of the failure was the brake switch signal errors. Additionally, we determined that ECM was the normal fail-safe mode that implemented the override device for safety during normal acceleration. Based on these results, further solar film experiments must be conducted to fully elucidate the causes.

• 한국산업정보학회논문지
• /
• 제5권4호
• /
• pp.1-15
• /
• 2000

Information systems (IS) failures still continue and are prevalent everywhere. When considering an enormous amount of budget currently invested on IS technology in many organizations, these continuing failures can be critical culprits to failures of the organizations themselves. However, the meaning and definition of IS failures are not unified among IS researchers as well as IS practitioners although there have been a lot of conceptual research regarding the concept of IS failures. Previous empirical studies are not enough yet and thus we anticipate further empirical studies to be performed which will validate previous conceptual research. In this regards, by analyzing IS practitioners perception toward IS failures in a more detailed manner, this research extends conceptual and empirical research in the past which previously identified the structure of information systems (IS) failures. Further, this current study identified the interrelationships among the categories. The data was analyzed using a multidimensional scaling program and fourteen categories of problems were identified as to constitute the IS failure structure. It was found that about a half of categories identified were related to technical failures such as network and system infrastructure, costs, data/information, and program errors. The other remaining categories were related with organizational or social problems such as business success, human resources, relationships, communication, and user skills.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2015년도 추계학술대회
• /
• pp.256-257
• /
• 2015

시장의 세계화와 정보통신의 발전에 의해, 운송망의 길이가 길어지고, 복잡화되었다. 이 때문에 운송신뢰성에 대한 연구의 필요성이 높아졌다. 본 연구에서는 트럭운송 시에 발생할 수 있는 예상치 못한 위험 사건의 결함나무분석(FTA)를 통해 정의하며, 각 위험사건간의 관계를 표현하여 실패율을 사례를 이용하여 구한다. 이를 통해 중간 위험사건 4가지에 대한 페트리네트를 통해, 인과관계를 고려한 순서와 시간에 따른 위험사건의 발생을 고려한 신뢰성을 신뢰도 함수를 이용하여 도출한다. 물류 운송시스템에 대한 신뢰성을 공학적인 방법론을 사용하여 수리적으로 도출한다는 점에서 연구의 의의가 있다.

• 센서학회지
• /
• 제21권2호
• /
• pp.103-108
• /
• 2012

Radiofrequency(RF) signal is a key medium to the most of the present wireless communication devices including RF identification devices(RFID) and smart sensors. However, the most critical barrier to overcome in RFID application is in the failure rate in detection. The most notable improvement in the detection was from the introduction of EPC Class1 Gen2 protocol, but the fundamental problems in the physical properties of the RF signal drew less attention. In this work, we focused on the physical properties of the RF signal in order to understand the failure rate by noting the existence of the ground planes and noise sources in the real environment. By using the mathematical computation software, Maple, we simulated the distribution of the electromagnetic field from a dipole antenna when ground planes exist. Calculations showed that the dark area can be formed by interference. We also constructed a test system to measure the failure rate in the detection of a RFID transponder. The test system was composed of a fixed RFID reader and an EPC Class1 Gen2 transponder which was attached to a scanner to sweep in the x-y plane. Labview software was used to control the x-y scanner and to acquire data. Tests in the laboratory environment showed that the dark area can be as much as 43 %. One who wants to use RFID and smart sensors should carefully consider the extent of the dark area.

• The Korean journal of internal medicine
• /
• 제33권6호
• /
• pp.1039-1049
• /
• 2018

The populations of Asian countries are expected to age rapidly in the near future, with a dramatic increase in the number of heart failure (HF) patients also anticipated. The need for palliative and end-of-life care for elderly patients with advanced HF is currently recognized in aging societies. However, palliative care and active treatment for HF are not mutually exclusive, and palliative care should be provided to reduce suffering occurring at any stage of symptomatic HF after the point of diagnosis. HF patients are at high risk of sudden cardiac death from the early stages of the disease onwards. The decision of whether to perform cardiopulmonary resuscitation in the event of an emergency is challenging, especially in elderly HF patients, because of the difficulty in accurately predicting the prognosis of the condition. Furthermore, advanced HF patients are often fitted with a device, and device deactivation at the end of life is a complicated process. Treatment strategies should thus be discussed by multi-disciplinary teams, including palliative experts, and should consider patient directives to address the problems discussed above. Open communication with the HF patient regarding the expected prognosis, course, and treatment options will serve to support the patient and aid in future planning.

• Child Health Nursing Research
• /
• 제28권2호
• /
• pp.91-102
• /
• 2022

Purpose: This study systematically analyzed cases in South Korea wherein nurses were prosecuted for involuntary manslaughter or injury due to professional negligence in pediatric care. Methods: We analyzed the precedents using the methodology of Hall and Wright (2008) and Austin (2010). Of the 618 cases retrieved from the Supreme Court Decisions Retrieval System in South Korea, we selected the 12 cases in which children were the victims and nurses were the defendants, using a case screening methodology. Results: The most frequent penalty was a fine, and newborns were the most frequent victims. The distribution of cases according to Austin's violation categories was: improper administration of medications (n=5), failure to monitor for and report deterioration (n=4), ineffective communication (n=4), failure to delegate responsibly (n=4), failure to know and follow facility policies and procedures (n=1), and improper use of equipment (n=1). Conclusion: To ensure the safety of children, nurses are required to teach and practice a high standard of care. Nursing education programs must improve nurses' awareness of their legal obligations. Nursing organizations and leaders should also work towards enacting effective nursing laws and ensuring that nurses are aware of their legal rights and responsibilities.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.16-18
• /
• 2005

Becoming more and more diversified and complicated, power quality management has focused on the electricity-failure duration(including the numbers), the appropriate rate of voltage(average voltage during 30 minutes), the stability rate of frequency etc. as a basic goal value. And recently the focus is moving into the instantaneous minute interruption factors such as voltage & current harmonics, surge occurring frequency, instantaneous voltage variation, voltage unbalance, instantaneous electricity failure, flicker etc. by the development of electricity & electronics and communication equipments, which had not been so big problems before. This paper will address the flow of analysis technology and forecast the desirable direction of power quality analysis technology in the future.

• 전자통신동향분석
• /
• 제8권3호
• /
• pp.39-52
• /
• 1993

This study involves a Common Cause Failure (CCF) problem on the ultra-high reliability required system development such as war game operations, nuclear power control, air traffic control, space shuttle missions, and large scale network communication system. The system situation problems are defined according to CCF, reliability and system fault identifications for the development cast verifications in the multi-version redundant software system. Then, CCF analysis of redundant system, system principles and statistical dependence are also described. This validation oh the CCF in the human software interaction system will notify software engineers to conceive what really is CCF contribution factor, not only the internal but the external ones.

• 한국병원경영학회지
• /
• 제1권1호
• /
• pp.136-153
• /
• 1996

The purpose of this study is to identify the factors hindering hospital reengineering project in one university hospital. The data was collected by the self-administered Questionnaire to 288 members of the hospital in Pusan on April 5-18, 1996. This study took some statistical methodologies, such as descriptive analysis, factor analysis and logit model analysis. The results were as follows; First, in the descriptive analysis for whether the hospital reengineering named RUSH94 was a success or not, the subjects judged that it was not successful and regarded their fable mutual communication as the main factor. Second, in the reason of failure at the reengineering project, the group who thought that the failure factor was the lack of mutual consensus checked the scores of the first factor produced from the factor analysis.