• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.1
• /
• pp.15-22
• /
• 2013

In oceanic flight routes, HF radio and satellite data links have weather restrictions, long propagation delay and low data throughput. In this paper, we propose oceanic aeronautical communications scheme in the VHF band based on ad-hoc communication. The proposed scheme organizes autonomously a multi-hop network that is divided into multiple local network using aircraft to fly long-distance communication and supports a hybrid type of multiple access, which consists of random access and TDMA (Time Division Multiple Access) scheme. In addition, several algorithms to apply spatial reuse of transmission to multi-hop long range communication environments have been proposed. The proposed system proves performance improvement on delay time as an effective solution to communicate end-to-end on the oceanic flight routes and strengthens the reliability of oceanic aeronautical communication.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.181-184
• /
• 2003

Recently, the fieldbus becomes an indispensable component for many automated systems. In the fieldbus system, realtime data containing sensor values and control commands has a tendency to rapidly lose its value as time elapses after its creation. In order to deliver these data in time, the fieldbus network should be designed to have short delay compared to the maximum allowable delay. Because the communication delay is affected by performance parameters such as target rotation timer of token passing protocol, it is necessary to select proper parameter settings to satisfy the real-time requirement for communication delay. This paper presents the timer selection method for Profibus token passing networks using genetic algorithm (GA) to meet the delay requirements.

• ETRI Journal
• /
• v.44 no.3
• /
• pp.512-523
• /
• 2022

Random delay countermeasures introduce random delays into the execution flow to break the synchronization and increase the complexity of the side channel attack. A novel method for attacking devices with random delay countermeasures has been proposed by using a maximal overlap discrete wavelet transform (MODWT)-based power trace alignment algorithm. Firstly, the random delay in the power traces is sensitized using MODWT to the captured power traces. Secondly, it is detected using the proposed random delay detection algorithm. Thirdly, random delays are removed by circular shifting in the wavelet domain, and finally, the power analysis attack is successfully mounted in the wavelet domain. Experimental validation of the proposed method with the National Institute of Standards and Technology certified Advanced Encryption Standard-128 cryptographic algorithm and the SAKURA-G platform showed a 7.5× reduction in measurements to disclosure and a 3.14× improvement in maximum correlation value when compared with similar works in the literature.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.4
• /
• pp.683-690
• /
• 2018

In this paper, a new signal processing technique is proposed for calibrating gain, phase, delay offsets in array antenna based anti-jamming minimum variance distortionless response (MVDR) global-positioning-system (GPS) receivers. The proposed technique estimates gain, phase and delay offsets across the antennas, and compensates for the offsets based on the estimates. A pilot signal with good correlation characteristics is used for accurate estimation of the gain, phase and delay offsets. Based on the cross-correlation, the delay offset is first estimated and then gain/phase offsets are estimated. For fine delay offset estimation and compensation, an interpolation technique is used, and specifically, the discrete Fourier transform (DFT) is employed for the interpolation technique to reduce the computational complexity. The proposed technique is verified through computer simulation using MATLAB. According to the simulation results, the proposed technique can reduce the gain, phaes and delay offset to 0.01 dB, 0.05 degree, and 0.5 ns, respectively.

• Journal of Navigation and Port Research
• /
• v.36 no.8
• /
• pp.637-641
• /
• 2012

In this paper, the method that reduce a computation time by optimizing computation process is proposed to realize low-power underwater acoustic communication system. At first, dependency of decision delay on tap length of linear equalizer was investigated. Variance is calculated based on this result, and the optimal decision delay bound is estimated. In addition to decide optimal tap length with decision delay, we extracted the MSE(Mean Square Error) graph. From the graph, we obtained variance value of the MSE-decision delay, and estimated the optimum decision delay range from the variance value. Also, using the extracted optimal parameters, we performed a simulation. According to the result, the simulation employing optimal tap length, which is only 40% of maximum tap length, showed a satisfactory performance comparable to simulation employing maximum tap length. We verified that the proposed method has 33% lower tap length than maximal tap length via sea trial.

• Journal of Korea Multimedia Society
• /
• v.17 no.9
• /
• pp.1084-1091
• /
• 2014

When demand for transmitting multimedia data increases, network congestion is more likely to occur and users will suffer high loss rate as well as high delay. In order to enhance quality-of-service (QoS) of video multicasting, we need to raise transmission reliability and reduce end-to-end delay. This paper proposes a routing mechanism for a OpenFlow-based small-scale network in order to multicast video reliably with low delay. In our method, multipath routing will be applied to Multiple Description (MD) Coded video to exploit its multi-description property. Through performance evaluation, our method shows improvement on loss rate, delay and video distortion.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.11
• /
• pp.1124-1129
• /
• 2008

Recently, two-port time-domain passivity approach was modified for time-varying communication delay. The newly proposed approach could achieve stable teleoperation even under the serious time-varying delay and packet loss communication condition. However, after some operation hour, the accumulated energy difference between the input energy from one port and the output energy at the other port caused unstable behavior until the passivity controller is activated. Resetting scheme is introduced for solving this problem, and stable bilateral teleoperation can be guaranteed without worrying about the accumulated energy difference.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.12
• /
• pp.1055-1064
• /
• 2003

In many automated systems, such as manufacturing systems and process plants, a fieldbus is a very important component for the exchange of various and sometimes crucial information. Some of the information has a tendency to rapidly lose its value as time elapses after its creation. Such information or data is called real-time data that includes sensor values and control commands. In order to deliver these data in time, the fieldbus network should be tailored to have short delay with respect to the individual time limit of various data. Fine-tuning the network for a given traffic requires the knowledge on the relationship between the protocol parameters such as timer values and the performance measure such as network delay. This paper presents a mathematical performance model to calculate communication delays of the Profibus-FMS network when the timer value and the traffic characteristics are given.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.8 s.111
• /
• pp.739-745
• /
• 2006

This paper presents a method to control group delay tine using a resonance circuit. The group delay time adjuster(GDTA) that can control signal group delay time comprises a variable capacitance and a variable equivalent inductor. These are coupled in parallel at a node and also controlled by two bias voltages separately, A variable equivalent inductor is realized a transmission line terminated a variable capacitor. Group delay time can be controlled by change of capacitance and inductance, but the resonating frequency is fixed. When the proposed GDTA is fabricated on RFID Korean frequency band$(908.5{\sim}914 MHz)$, a group delay variation is obtained about 3 ns.

• Journal of information and communication convergence engineering
• /
• v.3 no.3
• /
• pp.119-121
• /
• 2005

This paper aims to estimate the delay time of multiple signals in a multi-path environment. It also seeks to carry out a comparative analysis with the existing delay time under the proposed algorithm to develop a new algorithm that applies the space average method in a MUSIC algorithm. Unlike the existing delay time estimation algorithm, the developed algorithm was able to estimate the delay time in 5ns low. Therefore, the algorithm proposed in this paper improved the existing delay time estimated algorithm.