• 디지털산업정보학회논문지
• /
• 제8권4호
• /
• pp.135-142
• /
• 2012

DSRC system is a communication system that consists of road side equipment and on board equipment to provide services of communication technology for intelligent transportation systems. In this paper, we carry out a short-range dedicated high-speed wireless communications via DSRC system based on board equipment that is installed in the vehicle and road side equipment through wireless channels of communication. on board equipment is system that have a memory which initialization information is stored, it loads physical layer and MAC layer, LLC layer, L7 layer in turn. In the upper, it should analyze the various commands that are sent from roadside base stations, and carry out the operation which is in accordance with the command. and also it designs the structure of protocol stack which is TRM Layer loaded that is to initialize on L7 layer and MAC layer and efficiently designs operation between on board equipment and the road side equipment.

• 반도체디스플레이기술학회지
• /
• 제18권4호
• /
• pp.40-45
• /
• 2019

The smart factory has developed with the help of several technologies such as automation, artificial intelligence, big data, smart sensors and communication protocols. The Internet of things(IOT) among communication protocols has become the key factor for the seamless integration of various manufacturing equipment. Therefore, it is important that the IOT cooperate with the standards of communication protocols proposed by the SEMI in the semiconductor industry. In this paper, we suggest a novel reference model of the communication protocols for semiconductor equipment by introducing an IOT service layer. With the IOT service layer, we can use the functions and the additional services provided by the IOT standards that give the inter-operability between factory machines and host computers. We implement the standard of the communication protocols for semiconductor equipment with the IOT service layer by using ns3 simulator. It concludes that it is necessary to provide the platform for the IOT service layer to deploy efficiently the proposed reference model of the communication protocols.

• 전자공학회논문지
• /
• 제51권10호
• /
• pp.228-234
• /
• 2014

건설 중장비의 경우 유압기기 및 전장 배선 등으로 인하여 내부의 배선이 매우 복잡한 구조를 가지고 있으며, 이러한 복잡한 배선으로 인하여 장비의 생산 및 유지 보수에 많은 시간이 소요되고 있어 원가 상승 요인으로 작용한다. 본 논문에서는 건설 중장비의 전장 배선을 간소화하기 위한 고신뢰성을 갖는 PLC(Power Line Communication)-CAN(Controller Area Network) 통신 모듈을 설계하고 구현한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.3104-3110
• /
• 2011

This paper describes how to ensure safety of train by guaranteeing stable and continuous communication in RF-CBTC. CBTC System uses the wireless communication between onboard and wayside so that safety of wireless communication is the most important. Losing the position of train causes vital problem of train service. By losing the position of train, the other trains are blocked in the block and the train move by emergency mode so headway and safety cannot guaranteed. Therefore, safety is ensured by redundancy of wireless equipment. One of the ways to make redundancy is redundancy of equipment. However, the redundancy of equipment spends a lot of money to avoid interference in limited place like underground. Continuous communication is guaranteed by means of redundancy of wireless communication coverage to solve the problems even though one of the equipment is broken.

• 디지털산업정보학회논문지
• /
• 제14권4호
• /
• pp.87-92
• /
• 2018

One of the problems with the base station equipment is that there is a large difference between the replacement time of the hardware equipment such as the base station equipment and the radio access equipment, and the evolution period of the communication standard. Therefore, the base station communication platform must be flexible enough to handle the evolving communication standards after purchase. Recent research on reconfigurable communications platforms has focused on the efficient architecture of the communications platform to meet these requirements through software downloads while still using existing hardware. This paper presents a prototype of a base station communications platform based on the ETSI standard reconfigurable architecture. The communication platform presented in this paper is implemented as an ETSI standard reconfigurable architecture using a general-purpose DSP (Digital Signal Processor). In the implemented prototype, we verify the real-time feasibility of communication protocol updates through software reconfiguration.

• Journal of Information Processing Systems
• /
• 제18권6호
• /
• pp.822-829
• /
• 2022

According to existing study into the remote fault diagnosis procedure, the current diagnostic approach has an imperfect decision model, which only supports communication in a close distance. An Internet of Things (IoT)-based remote fault diagnostic approach for wind power equipment is created to address this issue and expand the communication distance of fault diagnosis. Specifically, a decision model for active power coordination is built with the mechanical energy storage of power generation equipment with a remote diagnosis mode set by decision tree algorithms. These models help calculate the failure frequency of bearings in power generation equipment, summarize the characteristics of failure types and detect the operation status of wind power equipment through IoT. In addition, they can also generate the point inspection data and evaluate the equipment status. The findings demonstrate that the average communication distances of the designed remote diagnosis method and the other two remote diagnosis methods are 587.46 m, 435.61 m, and 454.32 m, respectively, indicating its application value.

• 실천공학교육논문지
• /
• 제13권2호
• /
• pp.321-326
• /
• 2021

무선통신은 사물인터넷(IoT)을 구성하는 핵심기술이나 사물인터넷에 활용되고 있는 다양한 무선통신 기술들을 실습을 통해 학습할 수 있는 적합한 교육장비가 존재하지 않는다. 본 논문에서는 다양한 IoT 무선통신 실습을 수행해 볼 수 있는 첨단교육훈련장비 개발을 다룬다. 다양한 센서들을 제어하기 위한 디바이스로 아두이노 메가 보드를 사용하며 센싱한 데이터를 무선으로 송수신하기 위한 IoT 무선네트워크 기술로 WPAN 기술 중 RFID/NFC, Bluetooth 무선네트워크 기술, WLAN 기술 중 WiFi 기술을 사용하며 WWAN 기술 중 LoRa와 2.4GHz 무선 트랜시버를 사용한다. 그 밖에 GPS, 적외선통신, I2C 통신, SPI 통신에 대하여 실습을 통해 다양한 IoT 무선통신 기술들을 학습할 수 있도록 구성하였다. 또한 본 논문에서 개발한 교육장비는 2개의 디바이스를 장착하고 있어 장비내에서 무선네트워크 기술에 대한 송수신 실험을 수행해 볼 수 있도록 설계하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.275-281
• /
• 2005

In this paper, a new algorithm is proposed for high speed roaming in an Intelligent Train Control System(ITCS) and study on optimized positioning of radio communication equipment. A DCS(Data Communication System) which is a main part of CBTC(Communication Based Train Control) system, is consisted of radio based wireless communication system and wired optical system. In the radio based wireless communication, the position of AP enclosures and antennas shall be optimized for the guaranteed communication channel between wayside and trains both in open aired and tunnelled area. Also a communication channel established between wayside and train shall be maintained while train moves at its maximum speed. This study shows the way of determining the optimal position for the railway side communication equipment in Bundang Line and how to achieve continuous communicating channel for tracking and controlling train.

• 한국정보통신학회논문지
• /
• 제21권11호
• /
• pp.2052-2060
• /
• 2017

SOLAS 선박은 SFI group 코드 기준으로 적어도 83종의 장비를 탑재해야 하고, 각각의 장비는 다시 수 개에서 수십 개의 컴포넌트로 구성이 된다. 선박 운항 중에는 이러한 장비의 정상적인 운영이 보장되어야 하고, 문제 발생시 즉각적인 수리를 위하여 원격유지보수의 요구사항이 높다. 본 연구는 항해통신장비의 원격유지보수에 적합한 장비의 분류체계를 제시하고, 적절한 데이터베이스 구조를 도출하고자 했다. 연구 결과, 선박 항해통신장비의 원격유지보수를 위하여, 장비의 분류체계는 장비의 종류, 모델, 컴포넌트로 계층화되어야 하고, 고장모드와 영향분석, 질의응답, 수리이력, 상태정보와 예방정비 등의 테이블을 장비 모델 기준으로 구축하는 것이 효과적임을 알게 되었다. 140개의 항해통신장비 모델과 750개의 컴포넌트에 대하여 데이터베이스를 구축하였고, 실질적인 효과를 평가하기 위하여 선박장비 수리전문가가 클라우드 앱을 이용하여 검색 결과의 유용성을 평가하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.41-44
• /
• 2003

We propose portable equipment that monitors current and voltage of high-potential power transmission lines. In the equipment, a current and voltage sensor are attached to an insulator that supports a power transmission line: A clamped to the power line and the detected current signal is transmitted to the ground station by a wireless optical link using transmission line is detected by a high resistance element, zinc oxide (ZnO). That acts as a potential divider between the power line and ground. We make an experimental device for 66kV power line and demonstrate that it can monitor currents proposed equipment is small-sized, light, and inexpensive in comparison with the conventional CT (current transformer) and PT (potential transformer) since it does not require high potential insulators and magnetic cores, further, the equipment is easily installed owing to its small size and its simple structure.