• Proceedings of the Korean Reliability Society Conference
• /
• 2004.07a
• /
• pp.129-137
• /
• 2004

This paper presents an accelerated life test for burnout of tungsten filament of incandescent lamp. From failure analyses of field samples, it is shown that their root causes are local heating or hot sports in the filament caused by tungsten evaporation and wire sag. Finite element analysis is performed to evaluate the effect of vibration and impact for burnout, but any points of stress concentration or structural weakness are not found in the sample. To estimate the burnout life of lamp, an accelerated life test is planned by using quality function deployment and fractional factorial design, where voltage, vibration, and temperature are selected as accelerating variables. We assumed that Weibull lifetime distribution and a generalized linear model of life-stress relationship hold through goodness of fit test and test for common shape parameter of the distribution. Using accelerated life testing software, we estimated the common shape parameter of Weibull distribution, life-stress relationship, and accelerating factor.

• Journal of Welding and Joining
• /
• v.16 no.5
• /
• pp.67-75
• /
• 1998

This study aimed at he experimental and finite element analytic investigation of the effect of preheating on he residual stress of weldment. In this study, an autogenous arc welding was used on type 304 stainless steel and MARC as F.E.M. common code was utilized in analysis The analyses include transient and moving heat source and thermal properties as function of temperature. During welding, the thermal cycles of four locations in the weldment were recorded to investigate of the behavior of thermal stress and residual stress. The experimental and analytic results had good coincidence and show that there are two factors influencing the formation of welding residual stress in preheat process. One is the elevation of welding equilibrium temperature and the other is the increase of amount of heat input. The former decrease welding residual stress and the latter increase welding residual stress. Therefore, the cumulative effects result in the welding residual stress not being improved significantly with preheating in 304 stainless steel.

• Weed & Turfgrass Science
• /
• v.7 no.3
• /
• pp.239-245
• /
• 2018

Comparative drought resistances of 11 perennial warm-season turfgrasses were evaluated in the field after withholding irrigation for 48 days in summer I and 57 days in summer II. There were significant variations among the grasses in their drought resistances. From two years study of field shoot recovery from drought stress, the relative rankings among the 11 warm-season turfgrasses was as follows. 'Arizona Common' and 'Texturf 10' bermudagrasses [Cynodon dactylon (L.) Pers.], 'Tifgreen' hybrid bermudagrass [C. dactylon (L.) Pers. ${\times}$ C. transvaalensis Davy], and 'Georgia Common' centipedegrass [Eremochloa ophiuroides (Munro.) Mack.] possessed good drought resistances, whereas 'Texas Common' St. Augustinegrass [Stenotaphrum secundatum (Walt.) Kuntze] and 'Tifway' hybrid bermudagrass [Cyndon dactylon (L.) Pers ${\times}$ C. transvaalensis Davy] possessed poor drought resistances. 'Texas Common' buffalograss [Buchloe dactyloides (Nutt.) Engelm.], 'Pensacola' bahiagrass (Paspalum notatum Flugge.), and 'Adalayd' seashore paspalum (Paspalum vaginatum Swartz), 'Meyer' zoysiagrass (Zoysia japonica Steud.), 'Emerald' zoysiagrass (Z. japonica Steud. ${\times}$ Z. tenuifolia Willd. ex Trin.) were found to rank intermediate. Visual leaf firing showed the highest correlation (r=-0.84) to shoot recovery from drought stress. Visual leaf rolling (r=-0.59) and canopy-air temperature differential (r=-0.64) also showed very significant correlations, whereas leaf water potential (r=0.54) showed relatively lower correlation.

• Journal of the Korean Data and Information Science Society
• /
• v.5 no.2
• /
• pp.11-18
• /
• 1994

Sample sizes for experiments concerned with inference on R=Pr(X

• Korean Journal of Environmental Biology
• /
• v.22 no.4
• /
• pp.559-564
• /
• 2004

The effects of intra-peritoneal injection of inorganic mercury on haemato-logical parameters and hepatic oxidative stress enzyme activities were studied in common carp, Cyprinus carpio. The fish were injected thrice intra-peritoneally with mercuric chloride TEX>$(5,\;10mg\;Hg\;kg\;b.W.^{-1})$. After exposure of three different mercury concentrations a physiological stress response was exerted on C. carpio by causing changes in the blood status such as erythropenia in blood and oxidative stress in liver. Red blood cell counts, hemoglobin concentration and hematocrit level were reduced in most cases by inorganic mercury. Remarkable low level of serum chloride, calcium and osmolality were also observed in the mercury- exposed fish. However, serum magnesium and phosphate were not altered by exposure to mercury. An increased activity of hepatic glutathione peroxidase was observed in the lowest treatment group of carp $(1mg\;Hg\;mg\;b.w.^{-1})$, hence, hepatic catalase and glutathione peroxidase of carp exposed to higher concentration of mercury $(5,\;10mg\;Hg\;kg\;b.W.^{-1})$ showed significant reduction in such activities.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.475-480
• /
• 1997

It is common to assum identical allowable safety factors in static strength, defined by mean stress and in fatigue, defined by stress amplitude. Under the load with asymmetrical cycles the safety factor is not the same. In this paper, with the consideration of unequal allowable safety factors a general method for estimating fatigue reliability of a machine element under a combined state of stress is derived based on the theory proposed by Prof. Kececioglu and normal distribution. The calculation of fatigue reliability for limited life is discussed with example.

• Water for future
• /
• v.19 no.3
• /
• pp.239-248
• /
• 1986

Monthly wind stress, wind stress curl and volume transport stream functions are computed in the Eastern Sea(Japan Sea) based upon observed wind and atmospheric pressure data respectively. The presented two results show different distributios on locality and season but as common features the results reveal the northwesterly surface wind stress \ulcorner 새 the monsoon in winter, south to southwesterly wind stress \ulcorner 새 the southerly wind in summer and strond anticyclonic curl in the northern part on the Eastern Sea(Japan Sea) in winter. In the distributions obtained from the sea level atmospheric pressure data, the maximum value of the wind stress and of curls of small scales are shown off the southeast coast of Siberia and northeast coast of Korea. Volume transport distributions obtained from the Sverdrup relationship suggest that the strong northward boundary current can be formed along the northeast coast of Korea in winter and weak southward boundary current in summer.

• Structural Engineering and Mechanics
• /
• v.88 no.6
• /
• pp.609-623
• /
• 2023

The objective of this study is to investigate the distribution of von Mises stress, peeling stress, and shear stress in the adhesive layer used to bond two composite panels, considering various parameters using a three-dimensional finite element method. The stiffness of the materials and the effect of the stacking order on the amount of load transferred to the adhesive layer were examined to determine which type of laminate generates less stress at the bond line. The study analyzed six different stacking sequences, all with a common first layer in contact with the adhesive and a 0° orientation. Additionally, the impact of using hybrid composites on reducing bond line stress was investigated.

• Transactions of Materials Processing
• /
• v.19 no.2
• /
• pp.88-94
• /
• 2010

The next generation of diesel engine can operate at high injection pressure up to 1,800bar. The common rail pipe must have higher internal strength because it is directly influenced by the high-pressure fuel. Folding defects in the Common rail pipe can not ensure the structural safety. Therefore, Preform design and fatigue-life analysis are very important for preventing the head of the common rail pipe from folding in the heading process and for predicting fatigue life according to the amount of folding. In this study, a closed form equation to predict fatigue life was suggested by Goodman theory and pressure vessels theory in ASME Code in order to develop an optimization technique of the heading process and verified its reliability through fatigue-structural coupled field analysis. The results calculated by the theory were in good agreement with those obtained by the finite element analysis.

• Journal of Home Health Care Nursing
• /
• v.19 no.2
• /
• pp.195-203
• /
• 2012

Purpose: This study is conducted to investigate the stress level, stress source and stress coping of nursing students in college. Methods: This study was a cross sectional survey and the data was collected from 341 nursing students by means of self-reported questionnaires from April 2 to May 31, 2012. Collected data were analyzed on SPSS win 18.0. Results: The nursing students experienced moderate levels of stress. The source of stress for students came from 'one's own self'. The most common stress coping used by students was 'make a wish'. There were significant differences in the source of stress and the stress coping according to the nursing students' year of school and other general characteristics, such as motivation of entrance and satisfaction in school life. Conclusion: These results suggest that it is important to develop stress management program and strategies based on nursing students' individual characteristics and sources of stress.