• Title/Summary/Keyword: Common link

Search Result 329, Processing Time 0.02 seconds

Aeronautical to Ground Channel Modeling for Common Data Link (공용데이터링크를 위한 공대지 채널 모델링)

  • Park, Hongseok;Shim, Jae-Nam;Kim, Donghyun;Kim, Dong Ku
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.41 no.12
    • /
    • pp.1876-1883
    • /
    • 2016
  • The new channel model for high data rate common data link(CDL) is proposed. The Two-ray channel, which is composed of the reflected signals on the front ground of the receiver, is considered in this paper. This channel arises due to the curvature of the earth when the altitude of the transmitter is tens of kilometers and distance between the transmitter and the receiver is hundreds of kilometers. The Two-ray channel is modeled by estimating the maximum delay profile and the power delay profile, depending on the transmitting and receiving beamforming angle and the radiation pattern of antenna. The power delay profile has a larger effect on the bit error rate(BER) over signal to noise ratio(SNR) than the maximum delay profile, because the distance range is too long in the proposed channel model.

Research on Performance Analysis for the Long Distance Air-Ground Wideband Common Data Link (장거리 공중-지상 채널환경에서 대용량 데이터링크의 수신성능 분석방법 연구)

  • Ryu, Young-Jae;Ahn, Jae Min
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.42 no.4
    • /
    • pp.703-715
    • /
    • 2017
  • In this paper, we analyze the channel characteristics of the long distance air-ground wideband common data link and we propose a mathematical method to analyze the effect of narrowband and wideband interference of air-ground channel on the received signal of wideband data link. In this paper, we analyze the reception performance according to the communication distance using the proposed performance analysis method, and found out that the communication distance is limited by the narrowband and wideband interference of ground reflection wave. As a result of the performance analysis of the method of controlling the receiving antenna upward, not only the narrow band but also the wideband interference is effectively reduced, so that the communication distance is increased even in the existing wideband data link not including the equalizer.

Required Specification Analysis of CPRI Link of 4G Mobile Networks for Using WDM-PON Transmission (WDM-PON 전송을 이용한 4G 이동통신망 CPRI 링크의 시스템 요구규격 분석)

  • Kim, Sung-Man;Mun, Sil-Gu;Lee, Sang-Soo
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.37 no.7B
    • /
    • pp.499-504
    • /
    • 2012
  • Recently, base stations composed of digital unit (DU) and radio unit (RU) have been widely used in 4G mobile networks. To connect DU and RU, CPRI (common public radio interface) is usually used as the interface standard. This CPRI link is considered as one of the application markets for WDM-PON. In this paper, we analyzed the required specification of WDM-PON for the CPRI link of the 4G LTE-Advanced base station composed of DU and RU. This analysis is important to set a target goal of the development of WDM-PON system for 4G mobile networks.

Method of Format Conversion Between Link-K and KMTF Messages (Link-K와 KMTF 메시지 간 포맷 변환 방법)

  • Kim, Wan-Sik;Lee, Min-Sik;Kim, Sang-Jun;Park, Ji-Hyeon
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.20 no.2
    • /
    • pp.264-271
    • /
    • 2017
  • Link-K message is the Tactical Data Link message standard developed by the Agency for Defense Development which is optimized for the Joint Operation of ROK Armed Force. KMTF message is the standard message format of Battle Management Information System. Interconversion and propagation between these messages are definitely needed to have efficient warfare such as situation data propagation using network, the convergence of collected situation data, common situational awareness, cooperative engagement. Therefore, this study suggests a way of rule and process for format conversion between Link-K and KMTF messages.

The Effect of Link Length Variation on the Workspace of a Robot Arm (로봇 링크길이의 변화가 작업공간에 미치는 영향)

  • Choe, Byeong-O
    • 연구논문집
    • /
    • s.24
    • /
    • pp.13-26
    • /
    • 1994
  • The choice of design parameters for a robot arm depends on the desired workspace, load lifting capacity, application requirements, and the performance of the robot. The inverse process, which is the determination of a single robot's workspace for a given specification is also a common practice and is as important to the designers as it is to the users. Based on the geometric influence coefficients, the workspace areas on the vertical Y-Z plane are investigated and calculated. Using these areas, the effects of link parameters, link length ratios and joint rotation angles, are investigated.

  • PDF

Fast Link-Setup Protocol for Wireless Multimedia Sensor Networks (무선 멀티미디어 센서 네트워크를 위한 고속 링크 설정 프로토콜)

  • Pak, Wooguil
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.39C no.3
    • /
    • pp.247-254
    • /
    • 2014
  • For wireless multimedia sensor network (WMSN), it is crucial to select appropriate channels to deliver multimedia data stream generated by image and voice sensors periodically or continuously. Although most of previous researches assume that fixed channels are used for wireless sensor networks, they causes limit to support various application areas. In this paper, we apply link-setup algorithms developed for wireless cognitive radio networks for searching common channels between two nodes without common control channels. We also show the algorithm causes serious performance degradation as the total number of used channels increases, and then propose a new link-setup algorithm to resolve the problem. Therefore, the proposed algorithm shows 30 % higher performance compared to existing algorithms.

Common Control Channel Allocation in Cognitive Radio Networks through UWB Communication

  • Masri, Ahmed M.;Chiasserini, Carla-Fabiana;Casetti, Claudio;Perotti, Alberto
    • Journal of Communications and Networks
    • /
    • v.14 no.6
    • /
    • pp.710-718
    • /
    • 2012
  • The implementation of a common control channel is one of the most challenging issues in cognitive radio networks, since a fully reliable control channel cannot be created without reserving bandwidth specifically for this purpose. In this paper, we investigate a promising solution that exploits the ultra wide band (UWB) technology to let cognitive radio nodes discover each other and exchange control information for establishing a communication link. The contribution of this paper is threefold: (i) We define the communication protocol needed to let cognitive radio nodes discover each other and exchange control information for link set up, (ii) we overcome the gap in coverage, which typically exists between UWB and long-medium range technologies, by using multi-hop communication, (iii) we evaluate the performance of our approach by adopting an accurate channel model and show its benefits with respect to an in-band signaling solution.

Implementation of data link modem for surveillance UAVs (감시정찰 무인기를 위한 데이터링크 모뎀 구현)

  • Jung, Sung-jin;Kim, Young-kil
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2017.05a
    • /
    • pp.394-396
    • /
    • 2017
  • In various types of UAV systems, which have been developed recently, the communication system that is responsible for the connection between the ground control unit and the UAV is called the data link.Especially, in the data link used in systems for transmission of surveillance images from UAV in real time, stability of communication should be ensured. In this paper, the design of the data link modem was proposed for the purpose of applying for UAV for surveillance. And, the designed wad verified through the performance measurement of the implemented systems.

  • PDF

Development of Korean Joint Tactical Data Link System Based on CLIP (CLIP 기반의 한국형 합동전술데이터링크 체계 개발)

  • Kim, Seung-Chun;Lee, Hyung-Keun
    • Journal of IKEEE
    • /
    • v.15 no.1
    • /
    • pp.15-22
    • /
    • 2011
  • In order to performing the joint operation of Korean army efficiently, informations about surveillance, reconnaissance, and situation awareness need to be possessed jointly. In the first development phase (basis type) of the Korean joint tactical data link system (JTDLS-K), essential tactical information and recognized situation are owned among platforms in common by using existing wireless terminals. In the second development phase (completion type) of the JTDLS-K, a JTDLS which can perform network centric warfare (NCW) will be developed in due consideration of technology development of the basis type and common technology maturity degree. This is a joint battlefield system that can show fighting power simultaneous and polysynthetically through providing command and control messages effectively to each platform, which is participating in the joint and combined operations. In this paper, the development of JTDLS-K with a common data processor based on common link integration processing (CLIP) is described. From the test results of the system presented in this paper, it is demonstrated that quadrature phase shift keying (QPSK) signals can be applied to the system.