• 한국정보과학회논문지:소프트웨어및응용
• /
• 제31권6호
• /
• pp.697-715
• /
• 2004

컴포넌트 기반 개발 (CBD) 기술은 객체 보다 더 큰 컴포넌트 단위의 재사용을 통하여 개발 생산성을 높이는 재사용 기술이다. 그러나, CBD 컴포넌트의 구성요소와 의미를 정의하는 참조 모델이 국제적으로나 산업계에서 표준화되지 못하고 있어 CBD 플랫폼간의 상호연동과 이식성 문제가 있으며, 또한 개발자에게 어떤 모델을 채택해야 할 것인지의 신중한 결정을 요구한다. 본 논문에서는 대표적인 컴포넌트 참조모델들에 대한 정형적 뷰(View)인 메타 모델을 정의하고, 이를 기반으로 기술적인 상호 비교를 제시함으로써 각 기술의 장ㆍ단점 및 특징을 규명한다. 또한, 비교 평가를 통해 모든 컴포넌트가 공통적이며 필수적으로 만족해야 하는 핵심(Essential) 컴포넌트 모델과 최대한 다양한 장치와 구성요소를 가지는 확장(Extended) 컴포넌트 모델을 제시하여 상용 컴포넌트 모델들과의 객관적인 연관 관계 및 각 모델에 대한 정확한 평가를 할 수 있게 한다.

• 한국자동차공학회논문집
• /
• 제22권2호
• /
• pp.166-174
• /
• 2014

Fuel injection pressure has steadily increased in diesel engines for the purpose of improving fuel efficiency and cleaning exhaust gas, but it has now reached a point, where the cost for higher pressure does not warrant additional gains. Common rail systems on modern diesel engines have fuel pumps that are mechanically driven by crankshaft. The pumps actually house two pumping module inside: a low pressure pump component and a high pressure pump component. Part of the fuel compressed by the low pressure component returns to the tank in the process of maintaining the pressure in the common rail. Since the returning fuel represents pumping loss, fuel economy improves if the returned fuel can be eliminated by using a properly controled electrical fuel pump. As the first step in developing an electrical fuel pump the fuel supply system on a 6 liter diesel engine was modeled with AMESim to analyze the workload and the fuel feed rate of the injection pump, and the results served as basis for selecting a suitable servo motor and a reducer to drive the pump. A motor controller was built using a DSP and a program which controls the common rail pressure using a proportional control method based on the target fuel pressure information from the engine ECU. A test rig to evaluate performance of the fuel pump is implemented and used to show that the newly developed electrically driven fuel pump can satisfy the fuel flow demand of the engine under various operating conditions when the rotational speed of the pump is adequately controlled.

• 한국정보처리학회논문지
• /
• 제7권3호
• /
• pp.842-851
• /
• 2000

Developers can reuse not only class code but also wide range of knowledge on domain by reusing framework. Existing Object-Oriented Methodology and Catalysis Methodology were presented when redefining component in the course of redesigning framework. However, existing methodologies have weakness that entire process is waterfall mode or design of interface lays too much stress on implementation stage. So, this thesis will present Component-Oriented Methodology for the reuse of framework, and construct the environment for framework and domain development. That is, domain is analyzed by input of domain knowledge on real world to create software based on component, and hotspot is identified through analyzed information, and refactoring by putting additional information on users and developers. After that, I will create domain framework and application framework depending on domain. In this Component-Oriented Methodology, information is searched, understood and extracted or composite through component library storage internally. Then this information is classified into the information on component, and used as additional information in redesigning. With this, developer can obtain reusability, easiness and portability by constructing infrastructure environment that allows to register, update and delete component through Component Management System(CMS) under he development environment which can be easily applied to his own application using framework component, in this thesis, CoRBA(Common Object Request Broker Architecture) environment.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제28권12호
• /
• pp.896-909
• /
• 2001

현재 새롭게 개발되는 소프트웨어는 50% 이상이 분산 플랫폼에서 개발되고 있다. 또한 분산 컴포넌트 기반의 소프트웨어 개발을 가능하게 하는 EJB(Enterprise Java Beans)[1] COM(Component Object Model )[2]. CORBA(Common Object Request Broker Architecture)[3] 와 같은 기술이 급격히 발전하고 있다. 따라서 분산 플랫폼 상에서 컴포넌트 기반의 응용 소프트웨어 개발을 위한 체계적인 개발 프로세스가 요구된다. 그러나 현재의 일반적인 컴포넌트 기반 소프트웨어 개발 방법론은 각 작업들간의 관 계와 각 작업의 산출물간의 관계를 명확히 제시하지 않는다. 또한 분산 응용 소프트웨어 개발에 있어서 고려되어야 할 분산 이슈에 대해서도 체계적으로 다루지 않고 있다. 본 논문에서는 분산 컴포넌트 기반의 응용 소프트웨어 개발을 위한 분석 및 설계 방법을 제시한다. 본 논문에서 제시하는 방법에서는 UMI 기반의 프로세스인 Unified process를 바탕으로 하여 체계적인 개발 지침과 산출물의 관계를 제시한다 또한 플랫폼과 프로그래밍 언어에 독립적인 CORBA 환경을 고려하여 성능. 결함 방지, 안전성, 분산 트랜잭션의 분산 이슈를 명시적으로 다루는 지침을 제시한다.

• Journal of Information Technology Applications and Management
• /
• 제9권3호
• /
• pp.13-30
• /
• 2002

ebXML (Electronic Business using extensible Markup language), sponsored by UN/CEFACT and OASIS, is a modular suite of specifications that enables enterprises of any size and in any geographical location to conduct business over the Internet. Using ebXML, companies now have a standard method to exchange business messages, conduct trading relationships, communicate data In common terms and define and resistor business processes. It is the mission of ebXML that provides an open XML-based infrastructure enabling the global use of electronic business information in an interoperable, secure and consistent manner by all parties for creating a single e1ectronic electronic market. This paper briefly overviews the concept of core component, context, assembly rule and context rule. Then, It designs by standard specifications of ebXML core component commonly used in an industry and among industries, and assembles business messages by using XML schema. Therefore, it suggests the mechanism which effectively exchanges business messages among the trading partners. This paper designs core component by using only three business messages of retail industry : orders, dispatch report, sales report.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2000년도 제13회 춘계학술대회 및 임시총회 학술발표 논문집
• /
• pp.780-785
• /
• 2000

최근 활발히 연구되어 오고 있는 컴퍼넌트 기반의 소프트웨어 개발 방법론은 컴퍼넌트의 잘 정의된 인터페이스를 통해 응용 시스템을 개발함으로써 개발의 생산성과 유지보수성 그리고 신뢰성을 보장한다. 그러므로 인터페이스 명세 정의는 컴퍼넌트 기반의 소프트웨어 개발을 위한 필수적인 선행 과제이다. 컴퍼넌트 기반의 응용 시스템 생성 프로세스는 컴퍼넌트 아키텍쳐 정의와 이를 바탕으로 한 컴퍼넌트의 명세화, 그리고 컴퍼넌트 프레임워크로 적용의 단계를 통해 달성할 수 있다. 따라서 본 논문에서는 표준 하부 구조를 정의하고, 소프트웨어 전개 모델을 제공함으로써 컴퍼넌트 생성과 사용, 평가를 위한 근거를 확보할 수 있는 컴퍼넌트 아키텍쳐 모델 즉, ABCD(Architecture-Base Component- Common Component-Domain Component) 아키텍쳐를 제안한다. 또한, 이를 바탕으로 컴퍼넌트의 개발과 이용을 위하여 기존의 컴포넌트 명세가 가지는 비효율성을 극복하고 새로운 컴퍼넌트 명세 표기법을 제시하고자 한다.

• 한국컴퓨터정보학회논문지
• /
• 제9권1호
• /
• pp.31-36
• /
• 2004

인터넷 기술의 급격한 발전으로 지리정보시스템의 실행 환경 분야에서 개발 방법론의 변화가 일어나고 있으며, 사용자의 요구사항 다변화로 시스템의 통합과 컴포넌트 전략이 연구되어 왔다. 웹의 발달로 과거 일부 전문가만이 공유하던 공간정보를 조회하고 검색할 수 있는 새로운 개발 방법론과 기술개발이 절실히 필요하다. 이 논문에서는 웹 환경 하에서 공간 데이터 컴포넌트 모델링을 통하여 사용자의 요구사항을 최적화하기 위한 컴포넌트 설계기법과 개발 방안을 제시한다. 제안 기법과 프로세스는 실무적인 개발기법과 과정에 적용한 후 소프트웨어 개발과정을 단축하고, 개발비용을 절감 할 수 있는 개선효과를 평가한다.

• 한국CDE학회논문집
• /
• 제2권1호
• /
• pp.53-59
• /
• 1997

Current CAD systems used in the AEC community have some critical problems. One of them is that they hardly support design collaboration. Thus designers and engineers are hard to transfer design knowledge from one discipline to another. What we need is a common building database which creates and manages building plans/models and relevant design knowledge consistently and effectively. This paper presents a powerful CAD editor, called UNIFORM, which is being developed. Currently UNIFORM includes three main modules: a plan generator, a 3-D model generator, and component databases. A plan generator, called UNIFORM PLANNER, creates a plan which contains semantically-rich information of building. Each component in the plan can be presented in various ways and connected to component databases that contain knowledge of building components such as windows, doors, walls, etc. Based on the plan UNIFORM MODELER, another module of the program, generates a three dimensional building model which could be a multiple-story building. One of the main ideas behind the system is that it generates and maintains a common building form that can be easily delivered to other members of the project team. Thus it is expected to increase system integration, team interactions, and productivity.

• Computational Structural Engineering : An International Journal
• /
• 제1권2호
• /
• pp.139-150
• /
• 2001

An initial approach for the identification of physical causes underlying the spatial coherency of seismic ground motions it presented. The approach relies on the observation that amplitude and phase variability of seismic data recorded over extended areas around the amplitude and phase of a common, coherent component are correlated. It suffices then to examine the physical causes for the amplitude variability in the seismic motions, in order to recognize the causes for the phase variability and, consequently, the spatial coherency. In this study, the effect of randomness in the shear wave velocity at a site on the amplitude variability of the surface motions mi investigated by means of simulations. The amplitude variability of the simulated motions around the amplitude of the common component is contained within envelope functions, the shape of which suggests, on a preliminary basis, the trend of the decay of coherency with frequency.

• Clinical and Experimental Pediatrics
• /
• 제51권6호
• /
• pp.564-568
• /
• 2008

The prevalence of obesity in Korean children is estimated to be around 10%, and has increased significantly over the past 20 years. Metabolic syndrome, which includes central obesity, glucose intolerance, insulin resistance, dyslipidemia, and hypertension, is a well documented risk factor for cardiovascular diseases, but there is no general consensus concerning its definition for children. In this study, ablut 30-40% of overweight or obese children had metabolic syndrome compared to less than 10% in the general population. Dyslipidemia was the most common component and hyperglycemia was the least common component of metabolic syndrome. If the prevalence of childhood obesity continues to increase, it is highly likely that the prevalence of the metabolic syndrome will also increase. These findings emphasize the importance of preventing obesity in addition to the diagnosis and management of metabolic syndrome in Korean adolescents.