• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.569-572
• /
• 2003

The broadband wireless access industry, which provides high-tate network connections to stationary sites, has matured to the point at which it now has a standard for second-generation wireless metropolitan area networks. IEEE Standard 802.16, with its WirelessMAN air interface, set the stage for widespread and effective deployments worldwide. This paper presents an implementation of media access control that can be applied to BWA (Broadband Wireless Access) system. Medium access control (MAC) is a key issue in multi-access networks where a common channel is shared by many users. The designed MAC prototype roughly consists of MAC Hardware and MAC Software. The MAC Hardware part includes timing process, MAC transmission control, MAC reception control, and CRC/HCS process. The MAC Software part includes control of MAC signaling, network interface, and Physical (PHY) control. The designed MAC protocol will be integrated with the PHY of BWA in future and we can test overall system performance of MAC and PHY.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1483-1485
• /
• 2005

In recent years, customers and power supplies are interested in power quality. Demands of customers are change from standard quality of distribution power system to various high quality of distribution power system. so, it is necessary to apply power quality compensator. in our project, we develop the UPQC(Unfied Power Quality Compensator of 45kVA which compensates power factor and voltage sag, interruption. it is very frequently occurred power quality problems. As a series and shunt compensator, UPQC consists of two inverters with common dc link capacitor bank. It compensates the current quality in the shunt part and the voltage quality in the series part. In this paper, we present simulation and test result of developed UPQC system. Test for UPQC are performed at voltage sag, flickers and non-linear load conditions. For voltage sag and ficker generation, we use RTDS(Real Time Digital Simulator) and power amplifier system.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.4
• /
• pp.35-41
• /
• 1997

Speech database is an indispensable part of speech research. Speech database is necessary to use in speech research and development processes, and to evaluate performances of various speech-processing systems. To use speech database for common purpose, it is necessary to design utterance list that has all the possible phonetical events in minimal number of words, and is independent of tasks. To meet those restrictions this paper extracts PBW set from large text corpus. Speech database that was constructed using PBW set for utterance list and its properties are described in this paper.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.8
• /
• pp.1227-1240
• /
• 2009

This study examines the actual conditions of toddler playwear preference survey for design and function. The study develops proper indoor and outdoor playwear for toddlers based on the analysis. A survey of 200 parents with toddlers between 2 and 6 years old and 120 teachers was conducted to find the conditions and needs for playwear along with the necessary design elements. Second, 6 designs including 3 designs for indoor playwear and 3 designs for outdoor playwear were made. These designs emphasized on soil contamination part, color, pattern, form, material, detail, and fasteners. Art play and cooking play are considered for indoor playwear and ways to decrease contamination on sleeve hem, elbow, chest, and knee were determined through the use of yellow, green, and blue colors. Applying a character and separate top with sleeves were determined. Light with breathable and waterproof fabric was determined. The correct amount of Velcro fasteners or buttons was determined for front fastening in addition a pocket was considered necessary as a detail part. The common design for both boys and girls along with a proper design for diverse play were determined. For outdoor playwear, water play, sand play, movement play, and ecology experience are considered and ways to decease contamination on hip, sleeve hem, and knee should be applied to the design as determined through the use of yellow, green, blue, and red colors. The demands for pattern, form, material, and details were similar to indoor playwear. Zipper and buttons for front fastening were determined. These final 6 playwear designs are presented using CAD WALK DESIGNWARE.

• Smart Media Journal
• /
• v.4 no.2
• /
• pp.55-61
• /
• 2015

A bandwidth-enhanced ultra-wide band (UWB) CMOS balun-LNA is implemented as a part of a software defined radio (SDR) receiver which supports multi-band and multi-standard. The proposed balun-LNA is composed of a single-to-differential converter, a differential-to-single voltage summer with inductive shunt peaking, a negative feedback network, and a differential output buffer with composite common-drain (CD) and common-source (CS) amplifiers. By feeding the single-ended output of the voltage summer to the input of the LNA through a feedback network, a wideband balun-LNA exploiting negative feedback is implemented. By adopting a source follower-based inductive shunt peaking, the proposed balun-LNA achieves a wider gain bandwidth. Two LNA design examples are presented to demonstrate the usefulness of the proposed approach. The LNA I adopts the CS amplifier with a common gate common source (CGCS) balun load as the S-to-D converter for high gain and low noise figure (NF) and the LNA II uses the differential amplifier with the ac-grounded second input terminal as the S-to-D converter for high second-order input-referred intercept point (IIP2). The 3 dB gain bandwidth of the proposed balun-LNA (LNA I) is above 5 GHz and the NF is below 4 dB from 100 MHz to 5 GHz. An average power gain of 18 dB and an IIP3 of -8 ~ -2 dBm are obtained. In simulation, IIP2 of the LNA II is at least 5 dB higher than that of the LNA I with same power consumption.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.4
• /
• pp.144-150
• /
• 2005

Gas-assisted injection molding (GAIM) process is reducing the injection pressure during mold filling required as well as the shrinkage and warpage of the part and cycle time. Despite of these advantages, this process introduces new parameters and makes the application more difficult because the process interacts between gas and melt during injection molding process. Important GAIM factors that involved in this process include gas penetration design, locations of gas injection points, shot size, gas injection delay time as well as common injection molding parameters, gas pressure and gas injection time. In this study, the experiments were conducted to investigate effects of GAIM process variables on the gas penetration for PP and ABS moldings by changing gas injection point. Taguchi method was used fer the design of experiment. When the gas was injected at cavity's center, the most effective factor was shot size. When the gas was injected at cavity's end, the most effective factor was melt temperature. Injection speed was also an effective factor in GAIM process.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1070-1072
• /
• 2001

In recent years, customers and power supplies are interested in power quality. Demands of customers are change from standard quality of distribution power system to various high quality of distribution power system. so, it is necessary to apply power quality compensator, in our project, we develop the power quality compensator of 150kVA which compensates power factor and voltage sag, interruption. it is very frequently occurred power qualify problems[1,2]. As a series and shunt compensator, power quality compensator consists of two inverters with common do link capacitor bank. It compensates the current quality in the shunt part and the voltage qualify in the series part. In this paper we present the design and control algorithm of power quality compensator. As a control algorithm is implemented by digital controller, we consider sample-and-hold of signals. In this simulation, we use EMTDC/PSCAD V3.0 software which can simulate instantaneous voltage and current.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.351-353
• /
• 2004

In recent years, customers and power supplies are interested in power quality. Demands of customers are change from standard quality of distribution power system to various high quality of distribution power system. so, it is necessary to apply power quality compensator. in our project, we develop the UPQC(Unfied Power Quality Compensator of 45kVA which compensates power factor and voltage sag, interruption. it is very frequently occurred power quality $problems^{[1-3]}$ As a series and shunt compensator, UPQC consists of two inverters with common do link capacitor bank. It compensates the current quality in the shunt part and the voltage quality in the series part. In this paper, we present the design and control algorithm for 4SkVA UPQC system. As a control algorithm is implemented by digital controller, we consider sample-and-hold of signals. In this simulation, we use EMTDC/PSCAD V3.0 software which can simulate instantaneous voltage and current.

• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.2
• /
• pp.8-11
• /
• 2006

Gas-assisted injection molding (GAIM) process reduces the required injection pressure during mold filling stage as well as the shrinkage and warpage of the part and cycle time. Despite of these advantages, this process needs new parameters and makes the application more difficult because gas and melt interact during the injection molding process. Important GAIM factors involved in this process are gas penetration design, locations of gas injection points, shot size, delay time to inject gas as well as common injection molding parameters. In this study, the experiments are conducted to investigate effects of GAIM process variables on the gas penetration for PP (Polypropylene) and ABS (Acrylonitrile Butadiene Styrene) moldings by changing the gas injection point. Taguchi method is used for the design of the experiments. When the gas is injected at a cavity's center, the most effective factor is the shot size. When the gas is injected at a cavity's end, the most effective factor is the melt temperature. The injection speed is also an effective factor in GAIM process.

• Wind and Structures
• /
• v.37 no.3
• /
• pp.179-189
• /
• 2023

Multiple studies conducted in the past evaluated the conductor response under one tornado wind field, while the performance of transmission lines under different tornado wind fields still remains unknown. Thus, the objective of this paper is to estimate the variation in the conductor's critical longitudinal and transverse reactions under different tornado wind fields, as well as providing the corresponding critical tornado configurations. The considered full-scale tornadoes are the Spencer, South Dakota, 1998, the Stockton, Kansas, 2005 and the Goshen County, Wyoming, 2009. Computational Fluid Dynamics (CFD) simulations were previously conducted to develop these wind fields. All tornadoes have been rescaled to have a common velocity matching the upper limit of the F2 Fujita scale. Eight conductor systems, each including six spans, are considered in this paper. For each conductor, parametric studies are conducted by varying the location of the three tornado wind fields relative to the tower of interest, therefore the peak reactions associated with each tornado are determined. A semi-analytical closed-form solution, previously developed and validated, is used to calculate the reactions. The study conducted in this paper can be divided into two parts: In the first part, a parametric study considering a wide range of tornado locations is conducted. In the second part, the parametric study focuses on the tornado location leading to the critical tangential velocity on the tower. Based on this extensive parametric study, a critical tornado defined as the Design Tornado and its critical locations, tornado distance R = 125 m, tornado angle 𝜃 = 15° and 30°, are recommended for design purposes.