• 제목/요약/키워드: Common Mode(CM)

검색결과 47건 처리시간 0.025초

경피신경전기자극기를 이용한 비지각적 감각자극 강도가 뇌혈류에 미치는 영향 (Effect of Non-perceptual Sensory Stimulation Intensity Using Transcutaneous Electrical Nerve Stimulation on Cerebral Blood Flow)

  • 정주연;강창기
    • 감성과학
    • /
    • 제27권2호
    • /
    • pp.81-90
    • /
    • 2024
  • 본 연구에서는 경피신경전기자극(TENS)을 이용하여 다양한 자극 강도에 따른 뇌혈관에 미치는 영향을 확인하고자 한다. 특히 비지각적 감각의 전기자극을 통해 총경동맥(CCA)에서의 혈류 변화 및 혈관의 구조적인 변화를 확인해 보고자 한다. 본 연구에는 20대의 건강한 성인 24명이 참여하였다. 자극 강도는 감각 역치 미만, 감각 역치, 그리고 감각 역치 초과 세 가지를 각각 랜덤 순서로 적용하였다. 측정위치는 CCA 분기점의 1cm 하단에서 측정하였고, 혈류속도는 C-mode 도플러, 혈관의 구조는 B-mode 영상을 통해 측정하였다. 측정은 각각의 자극별로 중재 전, 중재 중, 그리고 중재 후에 수행하였고 각 세션마다 혈압의 변화를 측정하였다. 그 결과 최고 수축기 속도(PSV)는 역치미만의 비지각적 감각자극에서 중재 후 유의하게 감소함이 확인되었다(p = .008). 역치 미만의 자극 후 PSV는 자극 전보다 평균 3.04% 유의하게 감소한 것으로 나타났다(p = .011). 반면 CCA의 혈관 직경의 변화는 모든 강도에서 자극 전후 유의한 변화가 나타나지 않았다. 본 연구에서 적용한 단시간의 비지각적 전기자극이 혈관의 직경이나 혈압의 유의한 변화를 주지 않으면서 즉각적인 혈류속도 감소에 효과가 있음을 발견했다. 따라서 본 연구는 경동맥 부위에 환자의 불편함과 부작용이 없는 전기자극을 통해 뇌혈류의 조절이 가능하다는 것을 보여주는 중요한 시도로 평가될 수 있다.

Modeling and Filter Design through Analysis of Conducted EMI in Switching Power Converters

  • Vimala, R.;Baskaran, K.;Aravind Britto, K.R.
    • Journal of Power Electronics
    • /
    • 제12권4호
    • /
    • pp.632-642
    • /
    • 2012
  • This paper presents a filter analysis of conducted Electro-Magnetic Interference (EMI) in switching power converters (SPC) based on noise impedances. The EMI characteristics of SPC can be analytically deduced from a circuit theoretical viewpoint. The analytical noise model is investigated to get a full understanding of the EMI mechanism. It is shown that with suitable and justified model, filters pertinent to EMI noise is investigated. The EMI noise is identified by time domain measurements associated with an isolated half-bridge ac-dc converter. Practical filters like LC filter, ${\pi}$ filter and complete EMI filters are investigated. The proposed analysis and results can provide a guideline for improving the effectiveness of filtering schemes in SPC. Experimental results are also included to verify the validity of the proposed method. The results obtained satisfy the Federal Communications Commission (FCC) class A and class B regulations.

CPAP 및 SIMV Mode하에서 Pressure Support 사용이 호흡역학에 미치는 효과 (The Effect of Pressure Support on Respiratory Mechanics in CPAP and SIMV)

  • 임채만;장재원;최강현;이상도;고윤석;김우성;김동순;김원동;박평환;최종무
    • Tuberculosis and Respiratory Diseases
    • /
    • 제42권3호
    • /
    • pp.351-360
    • /
    • 1995
  • 연구배경: 압력보조는 환자의 흡기시 정해진 양의 양압을 보조하여 상시호흡량을 증가시키거나, 호흡일을 경감시키는 목적으로 쓰이는 기계환기법으로 본 연구는 자발적 호흡이 허용되는 SIMV 및 CPAP 양식에서 PS를 사용할 경우 환자의 호흡역학상 어떤 차이가 있는지 알아보고자 하였다. 방법: 중환자실에 입원하여 호흡부전으로 기계환기중인 환자로 임상적으로 안정되었고 자발적 호흡횟수가 분당 12회 이상인 환자 14명을 대상으로, 먼저 CPAP(3 cm $H_2O$) 양식하에서 0, 5, 10 및 15 cm $H_2O$의 PS를 순서대로 적용하면서 CP-100 pulmonary monitor(Bicore, USA)를 이용하여 호흡역학 지수들을 측정하고 이어서 SIMV 양식으로 바꾸어 같은 방법으로 호흡역학 지수들을 측정하였다. 결과: 1) CPAP 및 SIMV 방식하에서 PS가 호흡역학에 미친 공통된 효과 CPAP 양식하에서 PS를 증가시킴에 따라 상시호흡량은 증가하였고, WOB과 PTP는 감소하였다. SIMV 방식하에서도 PS를 증가시킴에 따라 상시호흡량은 증가하였고, WOB과 PTP 역시 유의하게 감소하였다. 2) CPAP 및 SIMV 방식하에서 PS가 호흡역학에 미치는 효과의 차이 CPAP 방식하에서 PS를 증가시킴에 따라 분당호흡수는 유의한 변동이 없었고, $P_{0.1}$$T_1/T_{TOT}$은 유의하게 감소되었다. SIMV 방식하에서 PS를 증가시킴에 따라 분당호흡수는 유의하게 감소한 반면, $P_{0.1}$$T_1/T_{TOT}$은 유의한 변동이 없었다. 3) CPAP+PS 양식에서 SIMV 단독양식에서와 같은 상시호흡량을 얻는 상태에서의 호흡역학의 비교 동일 환자에서 CPAP+PS 양식으로 SIMV 단독양식에서의 상시호흡량이 얻어지는 상태에서 분당호흡수 WOB, $P_{0.1}$ 등에는 양 방식 간에 차이가 없었으나 PTP와 $T_1/T_{TOT}$은 CPAP+PS 양식이 유의하게 낮았다. 결론: 기계호흡에서 압력보조의 사용은 CPAP 및 SIMV 양식 모두에서 상시호흡량을 증가시키고, 환자의 호흡일, 호흡근 산소소모량 지수를 감소시켰으며, 분당호흡수의 감소는 SIMV 방식에서만 관찰되었고, 중추성호흡추진력의 감소와 호흡근의 지구력지수의 호전은 CPAP 방식에서만 관찰되었다. 한편 상시호흡량이 같은 수준에서의 CPAP+ PS 방법은 SIMV 법에 비해 호흡근의 일효율이 더 높고 호흡근의 지구력지수가 더 우수하였다. 따라서, 기계적환기 유지기나 이탈과정의 환자에서 압력보조의 겸용은 환자의 호흡역학 상태를 개선하는 것으로 사료된다.

  • PDF

EMI Noise Source Reduction of Single-Ended Isolated Converters Using Secondary Resonance Technique

  • Chen, Zhangyong;Chen, Yong;Chen, Qiang;Jiang, Wei;Zhong, Rongqiang
    • Journal of Power Electronics
    • /
    • 제19권2호
    • /
    • pp.403-412
    • /
    • 2019
  • Aiming at the problems of large dv/dt and di/dt in traditional single-ended converters and high electromagnetic interference (EMI) noise levels, a single-ended isolated converter using the secondary resonance technique is proposed in this paper. In the proposed converter, the voltage stress of the main power switch can be reduced and the voltage across the output diode is clamped to the output voltage when compared to the conventional flyback converter. In addition, the peak current stress through the main power switch can be decreased and zero current switching (ZCS) of the output diode can be achieved through the resonance technique. Moreover, the EMI noise coupling path and an equivalent model of the proposed converter topology are presented through the operational principle of the proposed converter. Analysis results indicate that the common mode (CM) EMI noise and the differential mode (DM) EMI noise of such a converter are deduced since the frequency spectra of the equivalent controlled voltage sources and controlled current source are decreased when compared with the traditional flyback converter. Furthermore, appropriate parameter selection of the resonant circuit network can increase the equivalent impedance in the EMI coupling path in the low frequency range, which further reduces the common mode interference. Finally, a simulation model and a 60W experimental prototype of the proposed converter are built and tested. Experimental results verify the theoretical analysis.

게이트 구동회로가 간단하고 높은 효율을 가지는 새로운 형태의 브리지리스 PFC 컨버터에 관한 연구 (A New Bridgeless PFC Converter With Simple Gate Driving Circuit And High Efficiency for Server Power Application)

  • 이영달;김정은;김동민;최승현;문건우
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2019년도 전력전자학술대회
    • /
    • pp.92-94
    • /
    • 2019
  • 양방향 스위치를 가지는 Bridgeless PFC 컨버터(BBPFC)는 구조상 복잡한 플로팅 게이트 드라이버를 활용함에도 불구하고 좋은 공통모드 잡음 즉, Common-Mode (CM) 노이즈 특성과 간단한 제어 방법으로 인해 많은 브리지리스 PFC 컨버터 중에서도 고전력 응용분야에서 매우 매력적인 토폴로지이다. 이러한 BBPFC는 도통 경로 상에 위치한 정류 다이오드의 역회복 특성의 상대적인 편차를 활용하여 전력 밀도를 감소시키지 않고도 좋은 공통모드 (CM) 노이즈 특성의 확보가 가능하다. 하지만 이러한 장점을 가지는 BBPFC 구조를 고전력 서버용 전원장치분야에서 활용할 경우, 이미 등록된 특허로 인해 매우 높은 개런티를 지불해야 하므로 그 활용이 매우 제한적이다. 따라서, 본 논문에서는 이미 등록된 특허를 회피하고, 동시에 기존 BBPFC 회로가 가지는 단점인 플로팅 게이트 드라이버를 활용하는 단점을 개선하는 새로운 형태의 브리지리스 PFC 컨버터를 제안한다. 제안된 컨버터는 기존 BBPFC가 가지는 장점인 좋은 (CM) 노이즈 특성을 가지며, 동시에 높은 효율을 달성 할 수 있다. 또한 제안된 컨버터의 경우, 복잡한 플로팅 형태의 게이트 드라이버 회로가 아닌 간단한 부트스트랩 회로를 활용하여 회로를 운용할 수 있다. 더불어 제안된 컨버터는 입력의 양과 음의 주기에서 단 하나의 스위치를 사용하여 회로를 구동할 수 있기 때문에 기존회로 대비 적은 손실을 가져 높은 효율의 획득이 가능하다. 본 논문에서는 제안된 구조에 대해 하이라인 $230V_{RMS}$ 입력과 800W / 400V 출력의 조건을 적용하여 제안하는 구조의 효용성을 검증하고자 한다.

  • PDF

LED-TV용(用) 전원장치에 적합한 Hybrid 초크 코일의 특성 해석에 관한 연구 (A Study on the Characteristic Analysis of Hybrid Choke Coil suitable for LED-TV SMPS)

  • 김종해;김희승;원재선
    • 조명전기설비학회논문지
    • /
    • 제28권3호
    • /
    • pp.32-43
    • /
    • 2014
  • This paper presents the intra capacitance modeling according to the winding method, section bobbin and coil structure for hybrid choke coil capable of the EMI attenuation of broad bands from lower frequency bands to higher frequency bands and high frequency type common-mode choke coil capable of the EMI attenuation of high frequency band used in the EMI Block of LED-TV SMPS. In case of high frequency type CM choke coil, it can be explained the parasitic capacitance of A type and section bobbin type winding methods among them is much smaller than the other. The first resonant frequency of the proposed CM choke coil tends to increase as the parasitic capacitance becomes small and its impedance characteristics also show improved performance as the first resonant frequency increases. In case of hybrid choke coil using rectangular copper wire, it has investigated its parasitic capacitance compared to CM choke coil of conventional toroidal type becomes small. Also it has confirmed through the experiment results that CE margin and RE margin in frequency bands 0.5MHz to 5MHz and 30MHz to 200MHz are respectively 10dB and 15dB greater than that of conventional type in case of one stage EMI filter structure adopting hybrid choke coil compared to two stage EMI Filter structure using two of each CM choke coil used in the lower and higher frequency bands or two of CM choke coil used in only the lower frequency bands. In the future, the hybrid choke coil and CM choke coil of high frequency type show it can be practically used in not only LED/LCD-TV SMPS but also several applications such as LED Lighting, Laptop Adapter, Server Power Supply and so on.

전원용 광대역, 고성능 EMI 필터 개발에 관한 연구 (Power-Line EMI Filter for Broad-Band)

  • 정영철;이경원;육종관;박한규
    • 한국전자파학회논문지
    • /
    • 제16권1호
    • /
    • pp.56-65
    • /
    • 2005
  • 이 논문은 군 쉘터(shelter)내부의 전자기기용 전원부에 사용되는 고성능 전원용 광대역 EMI 필터를 제안하였다. 주파수 10 kHz~l GHz의 광대역에서 감쇠량 100 dB를 구현할 수 있는 최적의 EMI 필터를 구현하기 위해 먼저 시뮬레이션을 통해 각 소자의 용량에 대한 특성을 분석하였으며, 이를 기초로 실제 제작을 통해 실험적으로 노이즈 제거 성능을 증명하였다. 이 결과는 군용 쉘터뿐만 아니라 다른 첨단 무기들에 대한 전자파 대응 방호기술의 개발에 도움을 줄 것이다.

A Low-Power Portable ECG Touch Sensor with Two Dry Metal Contact Electrodes

  • Yan, Long;Yoo, Hoi-Jun
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제10권4호
    • /
    • pp.300-308
    • /
    • 2010
  • This paper describes the development of a low-power electrocardiogram (ECG) touch sensor intended for the use with two dry metal electrodes. An equivalent ECG extraction circuit model encountered in a ground-free two-electrode configuration is investigated for an optimal sensor read-out circuit design criteria. From the equivalent circuit model, (1) maximum sensor resolution is derived based on the electrode's background thermal noise, which originates from high electrode-skin contact impedance, together with the input referred noise of instrumentation amplifier (IA), (2) 60 Hz electrostatic coupling from mains and motion artifact are also considered to determine minimum requirement of common mode rejection ratio (CMRR) and input impedance of IA. A dedicated ECG read-out front end incorporating chopping scheme is introduced to provide an input referred circuit noise of 1.3 ${\mu}V_{rms}$ over 0.5 Hz ~ 200 Hz, CMRR of IA > 100 dB, sensor resolution of 7 bits, and dissipating only 36 ${\mu}W$. Together with 8 bits synchronous successive approximation register (SAR) ADC, the sensor IC chip is implemented in 0.18 ${\mu}m$ CMOS technology and integrated on a 5 cm $\times$ 8 cm PCB with two copper patterned electrodes. With the help of proposed touch sensor, ECG signal containing QRS complex and P, T waves are successfully extracted by simply touching the electrodes with two thumbs.

정온도형 유속 및 유량 측정센서 (Flow Velocity and Mass Measurement Sensor of Constant Temperature Type)

  • 박세광;김형표
    • 센서학회지
    • /
    • 제1권1호
    • /
    • pp.35-41
    • /
    • 1992
  • 기체와 액체의 유숙을 측정하기 위한 반도체 기술을 이용한 소형의 정온도형 유속센서가 제작되었다. 유속센서는 유속에 영향을 받는 대류 열전달만을 검출하도록 설계되었고, 다른 종류의 열전달과 간섭효과는 기준센서의 사용으로 상쇄되도록 하였다. 원리는 유동에 의한 센서 양단전류의 변화로 유속을 측정하는 것이다. 이 유속센서의 실험은 수돗물로 가는 관(지름 8mm)을 사용하여 수행되었다. 그 결과 센서의 소비전력과 유속의 제곱근 사이의 관계는 유속이 0-200cm/sec 범위에서 거의 선형으로 나타났다.

  • PDF

Characteristics and Treatment Outcomes of Patients with Malignant Transformation Arising from Mature Cystic Teratoma of the Ovary: Experience at a Single Institution

  • Oranratanaphan, Shina;Khemapech, Nipon
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제14권8호
    • /
    • pp.4693-4697
    • /
    • 2013
  • Background: Malignant transformation arising in mature cystic teratoma (MCT) is one of the most serious complications of MCT. Squamous cell carcinoma is the most common malignant change. Some clinical findings such as advanced age group and large tumor size are significant risk factors of malignant transformation. This study was conducted in order to evaluate characteristics, cell types, treatment and outcome of malignant transformation arising from dermoid cysts in our institution. Materials and Methods: A retrospective chart review was performed. General characteristics, operative data, procedure, operative finding and operative outcome were analyzed. Statistical assessment was performed with SPSS version 17.0, using mean, mode, median and percentage to describe those data. Results: During the 10 years period, 11 cases of malignant transformation from a total of 753 cases (1.46% incidence) of MCT were reviewed. Mean age of the patients was 41.2 years (SD 4.34, range 24-70). The most common presenting symptom was a palpable mass (8 cases; 72.7%). Primary surgical staging was performed in 4 patients (36.4%). Re-staging was conducted in the other 4. Complete cytoreduction was obtained in 45.5% (5 cases) and optimal surgical resection was obtained in 36.4% (4 cases). Mean tumor size was 14.1 cm. (SD 1.55, range 6-20). Squamous cell carcinoma was found in 36.4% (4 cases) and mucinous cancer in the other 4. More than half of them were stage Ia (54.5%, 6 cases). All patients whose stage more than Ia received chemotherapy (45.5%). Mean disease free survival was 5.53 years (1.32, 0.3-10). Conclusion: According to our study, the incidence of malignant transformation was consistent with previous studies. The common malignant transformation histologic types are both squamous and mucinous carcinoma which differed from previous reports. Early detection for early stage disease and optimal surgery are important for long term survival.