• Applied Chemistry for Engineering
• /
• v.35 no.4
• /
• pp.352-359
• /
• 2024

Environmental pollution from heavy metal ions (HMIs) is a global concern. Recently, biosorption methods using cellulose sorbents have gained popularity. The objective of this study was to assess the removal efficiency of Cu(II), Pb(II), and Hg(II) ions at low concentration levels (100-700 ppb) from aqueous solutions using three different cellulose fiber-based filter media. Sample A was pure cellulose fiber, Sample B was 10% activated carbon-cellulose fiber, and Sample C was cellulose fiber-glass fiber-30% activated carbon-20% amorphous titanium silicate (ATS). The samples were characterized by several physicochemical techniques. The porosity measurements using N₂ sorption isotherms revealed that Samples A and B are nonporous or macroporous materials, whereas the addition of 50% filler materials into the cellulose resulted in a microporous material. The Brunauer-Emmett-Teller (BET) surface area and pore volume of Sample C were found to be 320.34 m²/g and 0.162 cm³/g, respectively. The single ion batch adsorption experiments reveal that at 700 ppb initial metal ion concentration, Sample A had removal efficiencies of 7.5, 11.5, and 13.7% for Cu(II), Pb(II), and Hg(II) ions, respectively. Sample B effectively eliminated 99.6% of Cu(II) ions compared to Pb(II) (14.2%) and Hg(II) (31.9%) ions. Cu(II) (99.37%) and Pb(II) (96.3%) ions are more efficiently removed by Sample C than Hg(II) (68.2%) ions. The X-ray photoelectron spectroscopy (XPS) wild survey spectrum revealed the presence of Cu(II), Pb(II), and Hg(II) ions in HMI-adsorbed filter media. The high-resolution C1s spectra of Samples A and B reveal the presence of -C-OH and -COOH groups on their surface, which are essential for HMIs adsorption via complexation reactions. Additionally, the ATS in Sample C facilitates the adsorption of Pb(II) and Hg(II) ions through ion exchange.

• The korean journal of orthodontics
• /
• v.26 no.3
• /
• pp.317-324
• /
• 1996

This study was conducted to evaluate the tensile bond strength of three commercially available glass ionomer cements as orthodontic bracket adhesives. 120 premolars extracted for orthodontic treatment were prepared for bonding and standard edgewise brackets were bonded with Shofu Glaslonomer Cement (Shofu Co., U.S.A.), GC Fuji ItGC Co., Japan), KETAC-CEM(ESPE Co., West Germany) with different P/L ratio. The tensile bond strength was tested by Instron testing device after 24hours and 3months from bonding. After debracketing, bracket bases were examined to determine the failure sites. The results of this study were as follows: 1. KETAC CEM showed the highest bond strength other than measurement after 24 hours and at its original P/L ratio, and seemed to have clinically a proper bond strength. It seemed, however, that both Shofu Giaslonomer Cement and GC Fuji I had an inappropriate bond strength. 2. The incorporation of additional powder into the mixture improved the tensile bond strength. 3. Prolonged storage time improved the tensile bond strength. 4. Of the failure, failure occured at the tooth-adhesive interface(54.2%) was the most common type. The second type of failure(36.7%) was combination type, where part of the adhesive remained on the tooth and part on the bracket. And the last type of failure(9.1%) occured at the adhesive-bracket interface.

• Archives of Plastic Surgery
• /
• v.44 no.2
• /
• pp.144-149
• /
• 2017

Background The purpose of this study was to identify the epidemiologic characteristics of hand tendon injuries in children and to compare these with those of adults. Methods This retrospective study was conducted on acute traumatic tendon injuries of the hand treated at our institution from 2005 to 2013, based on medical records and X-ray findings. Age, sex, hand injured, mechanism of injury, tendons and zones injured, number of affected digits, and comorbidities and complications were analyzed. Patients were divided into 2 groups: a pediatric group (${\leq}15years$) and an adult group (>15 years). Results Over the 9-year study period, 533 patients were surgically treated for acute traumatic tendon injuries of the hand. In the pediatric group (n=76), being male, the right hand, the extensor tendon, complete rupture, the middle finger, and glass injury predominated in hand tendon injuries. In the adult group (n=457), results were similar, but injury to the index finger and knife injury were the most common. An accompanying fracture was more common in the adult group and complication rates were non-significantly different. Conclusions This comparative analysis revealed no significant epidemiologic intergroup differences. The belief that pediatric tendon injuries tend to be less severe is misplaced, and careful physical examination and exploration should be conducted in pediatric cases of hand injury.

• Journal of Yeungnam Medical Science
• /
• v.21 no.1
• /
• pp.101-107
• /
• 2004

Diffuse alveolar hemorrhage is a rare but serious and frequently life-threatening complication of a variety of conditions. The first goal in the management of patients with diffuse alveolar hemorrhage is to achieve or preserve stability of the respiratory status. Subsequently, the differential diagnosis is aimed at the identification of a remediable cause of the alveolar hemorrhage. The most common causes of diffuse alveolar hemorrhage with glomerulonephritis are microscopic polyangiitis and Wegener's granulomatosis, followed by Goodpasture syndrome and systemic lupus erythematosus. Microscopic polyangiitis (MPA) is a distinct systemic small vessle vasculitis affecting small sized vessels with few or no immune deposits and with no granulomatosus inflammation. The disease may involve multiple organs such as kidney, lung, skin, joint, muscle, gastrointestinal tract, eye, and nervous system. MPA is strongly associated with antineutrophil cytoplasmic autoantibody (ANCA) that is a useful serological diagnostic marker for the most common form of necrotizing vasculitis. Our report concerns a case of microscopic polyangiitis with diffuse alveolar hemorrhage in a 54-year-old man. He was admitted to our hospital due to dyspnea upon exertion and recurrent hemoptysis. Laboratory findings showed hematuria, proteinuria and deterioration of renal function. In the chest CT scan, diffuse ground glass appearance was seen in both lower lungs. A lung biopsy revealed small vessel vasculitis with intraalveolar hemorrhage and showed a positive reaction to against perinuclear ANCA. The patient was treated with prednisolone and cyclophosphamide. Chest infiltration decreased and hemoptysis and hypoxia improved. He is still being followed up in our hospital with a low dose of prednisolone.

• Tuberculosis and Respiratory Diseases
• /
• v.55 no.3
• /
• pp.311-316
• /
• 2003

A 34-year-old man was admitted to our hospital due to fever and cough. He received the combination anti-cancer chemotherapy for testicular tumor, including bleomycin. The chest X-ray showed consolidation and ground glass opacity on the right upper lobe and subpleural areas of other lobes. This condition was initially misdiagnosed as a pneuomonia, but consolidation did not disappear after antibiotics treatment. We performed transbronchial lung biopsy and bleomycin induced pulmonary toxicity was confirmed. The bleomycin induced lung injury is the most common chemotherapeutically induced pulmonary disease. Bleomycin induced Bronchiolitis Obliterans Organizing Pneumonia(BOOP) is less common than interstitial pneumonitis and responds well to corticosteroid treatment.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.2
• /
• pp.219-225
• /
• 2013

In this study, the tribological characteristics of silver films that were deposited on a glass substrate by electroless plating were investigated. The electroless-plating method has many notable advantages. It is easy and economical to obtain solid films using this coating process, and it can be applied to both nonconducting and conducting substrates. In this study, silver was selected as the electroless-plating material because it is one of the most common materials used as a solid lubricant. The mechanical properties of silver electroless-plated specimens were investigated for various coating conditions. The thickness of the coating could be controlled by varying the electroless-plating time. The properties of the coatings were investigated using AFM, SEM, and a tribotester.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.2
• /
• pp.429-434
• /
• 2010

A novel T-type polyester 7 containing 1-(2,5-dioxyphenyl)-2-{5-(1,2,2-tricyanovinyl)-2-thienyl}ethenes as nonlinear optical (NLO) chromophores, which are part of the polymer backbone, was prepared and characterized. Polyester 7 is soluble in common organic solvents such as dimethylsulfoxide and N,N-dimethylformamide. It showed a thermal stability up to $300^{\circ}C$ in thermogravimetric analysis thermogram and the glass-transition temperature ($T_g$) obtained from differential scanning calorimetry thermogram was around $113^{\circ}C$. The second harmonic generation (SHG) coefficient ($d_{33}$) of poled polymer films at 1,560 nm fundamental wavelength was around 1.85 pm/V. The dipole alignment exhibits a greater thermal stability even at $10^{\circ}C$ higher than $T_g$, and there is no SHG decay below $125^{\circ}C$ due to the partial mainchain character of the polymer structure, which is acceptable for nonlinear optical device applications.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.6
• /
• pp.907-914
• /
• 2012

Flexible pipes take advantage of their ability to move, or deflect, under loads without structural damage. Common types of flexible pipes are manufactured from polyethylene (PE), polyvinyl chloride (PVC), steel, glass fiber reinforced thermosetting polymer plastic (GFRP), and aluminum. In this paper, we present the result of an investigation pertaining to the short-term behavior of buried polyethylene pipe. The mechanical properties of the polyethylene pipe produced in the domestic manufacturer are determined and the results are reported in this paper. In addition, vertical ring deflection is measured by the laboratory model test and the finite element analysis (FEA) is also conducted to simulate the short-term behavior of polyethylene pipe buried underground. Based on results from soil-pipe interaction finite element analyses of polyethylene pipe is used to predict the vertical ring deflection and maximum bending strain of polyethylene pipe.

• Korean Institute of Interior Design Journal
• /
• v.22 no.3
• /
• pp.135-144
• /
• 2013

This study is to focus on an innate creative 'spirituality' of Weimar Bauhaus' pedagogical thoughts and their backgrounds. In particular, this notes three elements of Universal mysticism, Orientalism in early Bauhaus including Expressionism, and Froebelian Education as the more practical among the romantic legacies as a source of modernism. Arguably, through these researches, just as the expressionists represent the crystallization of glass as the spirit, the important that should be noticed is explained as the fact that a panentheistic Idea of matter and spirit as a whole had been spreading to be recognized consciously or unconsciously; in other words, this awakening as dualistic monism might be one of the greatest peculiarities of modernity, and, as the fact that the universal thought and principle of 'panentheism' emphasizing a 'divine' artistic volition which is immanent in the individual is implanted first of all fundamentally by Froebelian educational influences.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.7.1-7.1
• /
• 2011

Nanoporous templates have been widely used for the development of new functional nanostructured materials suitable for electronics, optics, magnetism, and energy storage materials. We have prepared nanoporous templates by using thin films of mixtures of polystyrene-block-poly (methyl methacrylate) (PS-b-PMMA) and PMMA homopolymers. These templates have cylindrical nanoholes spanning the entire thickness of the film. Some applications of nanoporous templates are introduced: a) anti-reflective coating, b) the preparation of conducting polymer nanowires of poly (pyrrole), poly (3,4-ethylenedioxy-thiopene) onto a glass coated with indium-tin-oxide, and c) the separation membranes for biomaterials. We found that when the pore fraction of nanoholes in the film was ~0.68, almost zero reflectance at a specific wavelength, which can be changed with film thickness, was achieved at visible wavelengths Furthermore, ultra high density array of conducting nanowires was successfully prepared onto various substrates including flexible polymer. Due to highly alignment of polymer chain along the nanowire direction, the conductivity was much increased. Furthermore, these nanoporous films were found to be very effective for the separation of human Rhinovirus type 14 (HRV 14), major pathogen of a common cold in humans, from the buffer solution. We also found that when the pore size was effectively controlled down to 6 nm, a single file diffusion was observed.