• Journal of the Korean Wood Science and Technology
• /
• v.46 no.4
• /
• pp.309-314
• /
• 2018

Size reduction is an important pre-processing operation for utilizing biomass as a sustainable resource in industrial-scale energy production and as a raw material for other industries. This work investigates the size reduction characteristics of air-dried Miscanthus sacchariflorus Goedae-Uksae 1 (Amur silver grass) via image processing and identifies the morphological characteristics of comminuted and screened M. sacchariflorus. At chopping lengths of 18, 40, 80, and 160 mm, 81%, 77%, 78%, and 76% of the particles, respectively, passed through a 4-mm sieve. Even a knife mill with a very small screen aperture (>1 mm) admitted over 10% of the particles. The average circularity and aspect ratio of the particles were <0.30 and >10, respectively. These results confirm that in all preparation modes, most M. sacchariflorus particles were needle-like in shape, irrespective of the type of preparation.

• Archives of Reconstructive Microsurgery
• /
• v.23 no.1
• /
• pp.18-20
• /
• 2014

Two aged patients who had open tibial fractures with arterial injury caused by high energy accidents underwent emergency arterial reconstruction using a greater saphenous vein and soft tissue repair using free flaps. In the patients, soft tissue necrosis developed and tibias were exposed at postoperative third week. Follow-up angiography through the superficial femoral artery showed occlusion of the anterior tibial artery. The anterior tibial artery was reconstructed using the contralateral greater saphenous vein graft and the latissimus dorsi myocutaneous and rectus abdominis muscle free flaps were transplanted for repair of necrotic soft tissue. The reconstructed arteries showed good perfusion to the new free flaps until union of the tibias occurred. The patients were followed-up for 21 years and 17 years postoperatively, respectively. In management of open comminuted fracture of the tibia, injury of the arterial system must be ruled out by angiography in addition to evaluation of the degree of soft tissue injury.

• Clinics in Shoulder and Elbow
• /
• v.20 no.1
• /
• pp.49-56
• /
• 2017

Since the olecranon fractures are caused by relatively low-energy injuries, such as a fall from standing height, they are usually found without comminution. Less commonly they can be developed by high-energy injuries and have severe concomitant comminution or injuries to surrounding structures of the elbow. Because the fracture by nature is intra-articular with the exception of some avulsion-type fracture, a majority of olecranon fractures are usually indicated for surgical treatment. Even if there is minimal displacement, surgical treatment is recommended because there is a possibility of further displacement by the traction force of triceps tendon. The most common type of olecranon fracture is displaced, simple non-comminuted fracture (that is, Mayo type IIA fractures). Although tension band wiring was the most widespread treatment method for these fractures previously, there is some trends toward fixation using locking plates. Primary goal of the surgery is to restore a congruent joint and extensor mechanisms by accurate reduction and stable fixation so that range of motion exercises can be performed. The literature has shown that good clinical outcomes are achieved irrespective of surgical fixation technique. However, since the soft tissue envelope around the elbow is poor and the implants are located at the subcutaneous layer, implant irritation is still the most common complication associated with surgical treatment.

• Clinics in Shoulder and Elbow
• /
• v.23 no.3
• /
• pp.131-135
• /
• 2020

Background: Resection of the radial head is a surgical indication for comminuted radial head fracture in which internal fixation is inaccessible. Some complications from the surgery can alter the function of the patient's elbow. The objective of this study was to assess functional outcome of the elbow after resection of the radial head. Methods: A retrospective longitudinal study was performed with patients who underwent radial head resection between 2008 and 2018. Elbow function was assessed by the Mayo Elbow Performance Index (MEPI) for 11 patients comprising three women and eight men. The mean follow-up was 47.6 months. The mean age was 41±10.3 years. Results: Nine patients had a stable and painless elbow. The mean extension-flexion arc was 97.73°±16.03°. The mean values of pronation and supination were 76.8° and 74.5°, respectively. The mean MEPI score was 83.2 points, and restoration of overall function was achieved in 81% of the cases. Poor function was noted in one in 10 that presented with a terrible triad. Conclusions: Resection of the radial head restored elbow functionality at a rate of 81%, which was a good outcome for patients.

• Korean Journal of Materials Research
• /
• v.11 no.9
• /
• pp.797-801
• /
• 2001

In this study, the solution combustion method was employed to synthesize stoichiometric mullite, and hence the attrition process was employed to prepare ultrafine mullite particles with nano size. The thermal decomposition behavior and partial pressure of equilibrium species of both oxidizer and fuel were considered during solution combustion process. The synthesized product was mullite phase with 40 nm crystalline size, and the alumina contents of the product by TEM/EDS quantity analysis was 3.12$\pm$04 mole. The result showed that the synthesized mullite was almost close to the it's stoichiometric composition. For attrition process, the dispersion behavior of the mullite suspension was controlled and was comminuted with the condition of 800 rpm for 4 hours using 0.3 mm zirconia ball media. As a result of comminution, the mean particle size was 80 nm.

• Journal of the Korean Ceramic Society
• /
• v.31 no.4
• /
• pp.448-456
• /
• 1994

The reaction-sintered alumina and zirconia-alumina ceramics were fabricated from the Al/Al2O3 or Zl/ZrO2(Ca-PSZ) powder mixtures via the attrition milling. And the effects of the milling characteristics of used raw powders on reaction sintering were investigated. After attrition milling and isopressing at 400 MPa the Al/Al2O3 specimen was oxidated at 1200℃ for 8 hours followed by sintering at 1550℃ for 3 hours. Because mixed powders of flake-type Al with coarse alumina was much more effectively comminuted than the globular-type Al with coarse alumina powders, it's sintered body of more than 97% theoretical density was achived, but low contents of Al leads to relatively higher shrinkage of about 8%. And because coarse alumina particles was much more beneficial in cutting and reducing the ductile Al particles, using the coarse alumina powder was much more effective in reaction sintering. Fused Ca-PSZ powder was reaction sintered with Al at 1550℃ for 3 hours and low shrinkage ZrO2-Al2O3 composites were fabricated. But because Al/Ca-PSZ powder mixtures were not effectively milled the reaction sintering and densification was difficult. And the Ca ion in Ca-PSZ grains diffused into alumina grains during sintering so that the unstabilization of Ca-PSZ body was occured which gave the microcracks in the specimens.

• Journal of Veterinary Clinics
• /
• v.15 no.1
• /
• pp.222-227
• /
• 1998

This survey was based on the data of one hundred four dogs with 108 case,T of fracture admitted to the veterinary teaching hospital, College of Veterinary Medicine, Kyungpook National University and 24 private small animal hospitals from January, 1995 to Decemberi 1996. The results were analyzed as following criteria; the distribution of fractures causes of fractured age and sexual distributions month of the most frequencel total body weights presence of communicating external wound, extent of damaged direction of fracture line, location of fracture liner fracture managements fixations methods, fixations methods according to location of fracture. The results of survey were as follow: 1. Main distribution of fracture; radius . ulna (23.1%).2. Causes of fracture; road toraffic accident (39.4 T,). 3. Age; over 24 months (27.9%). 4. Sex; male (53.89)), female (46.2%). 5. Month of the most frequence; July (14.4%) 6. Total body weight: 2-5 kg (45.27)). 7. Presence of communicating external wound; closed fracture (94.2%). 8. Extent of damage; complete fracture (92.6%). 9. Direction of fracture line: comminuted fracture (27.8 To). 10. Location of fracture line; diaphysis (62.0%). 11. Fracture management; open reduction (58.3% ). 12. Fixation methods; not treat (22.2%). 13. Fixation methods according to location of fracture; radius ulna-Kirschner wire fixation (45.5%), femur. shaft-intramedullary pinning (71.4%), pelvis-bone plate (53.3%), metacarpus-not treat, Kirschner wire fixation (each 30.8%).

• Journal of Veterinary Clinics
• /
• v.33 no.5
• /
• pp.261-265
• /
• 2016

The purpose of this study was to perform retrospective data collection of the sites and types of fracture in raptors in order to enable wildlife veterinarians to manage cases of fracture more effectively. This study included raptors with fracture, rescued between January 2013 and August 2015 in the Daegu-Gyeongbuk region in Republic of Korea. The data were collected from the medical reports and radiographic findings acquired from designated animal hospitals for wild animals, the Dongin Animal Hospital and the Kyungpook wildlife rescue center. The distribution, sites, and types of fracture, and outcomes of rescue and fracture management of the raptors included in this study were analyzed. Among the 31 birds included in this study, Falco tinnunculus was the most common species. Of the 42 sites of fracture, the diaphysis of the humerus was the most common site of fracture, and comminuted fracture was the most common type. Of the 31 birds, 13 were treated surgically. Intramedullary pinning with bandaging was the most common method of surgical treatment. While 7 of the 13 birds died, 2 were reintroduced into the wild, and 4 were kept captive. This study presents the evaluation of the data on the species, sites, and types of fracture, and treatment procedures and outcomes in raptors with fractures, rescued in the Daegu-Gyeongbuk region. The findings of this study could serve as a basic database for the treatment of fracture in raptors.

• Journal of Trauma and Injury
• /
• v.34 no.3
• /
• pp.212-217
• /
• 2021

Various medical scenarios have arisen with the prolonged coronavirus disease 2019 (COVID-19) pandemic. In particular, the increasing number of asymptomatic COVID-19 patients has prompted reports of emergency surgical experiences with these patients at regional trauma centers. In this report, we describe an example. A 25-year-old male was admitted to the emergency room after a traffic accident. The patient presented with stuporous mentality, and his vital signs were in the normal range. Lacerations were observed in the left eyebrow area and preauricular area, with hemotympanum in the right ear. Brain computed tomography showed a contusional hemorrhage in the right frontal area and an epidural hematoma in the right temporal area with a compound, comminuted fracture and depressed skull bone. Surgical treatment was planned, and the patient was intubated to prepare for surgery. A blood transfusion was prepared, and a central venous catheter was secured. The initial COVID-19 test administered upon presentation to the emergency room had a positive result, and a confirmatory polymerase chain reaction (PCR) test was administered. The PCR test confirmed a positive result. Emergency surgical treatment was performed because the patient's consciousness gradually deteriorated. The risk of infection was high due to the open and unclean wounds in the skull and brain. We prepared and divided the COVID-19 surgical team, including the patient's transportation team, anesthesia team, and surgical preparation team, for successful surgery without any transmission or morbidity. The patient recovered consciousness after the operation, received close monitoring, and did not show any deterioration due to COVID-19.

• Food Science of Animal Resources
• /
• v.41 no.1
• /
• pp.110-121
• /
• 2021

Meat industries utilize plant material such as celery in cured meat products. Extraction of valuable bioactive compounds, nitrates and nitrites often involves processes that increase cost or lack sustainability. Thus, this study investigated the effect of ball-milled celery powders (CP) on the physicochemical, antioxidant, and antimicrobial properties along with curing efficiency in comminuted meat product. Pork sausages loaded with CPs with different average particle sizes: 265 ㎛ (T1), 68 ㎛ (T2) and 7 ㎛ (T3) were compared to those added without and with sodium nitrite (150 ppm). The a⁎ values were increased for sausages with larger particle size. The L⁎ values decreased for all CPs. Residual nitrite for all particle sizes increased in the earlier stages and decreased at the end of storage period. The curing efficiency also increased for larger size particles with an increase until day 9 followed by a gradual decrease. Superfine CP had a tendency to improve the antioxidant activities. The antimicrobial activity of CPs was not comparable with nitrite added sausages. The textural parameters remained unaffected by particle size. Thus, instead of extracts or juices, micronized CPs could be used to improve the antioxidant activities and curing efficiency of label friendly reformulated meat products.