• Steel and Composite Structures
• /
• 제21권6호
• /
• pp.1307-1325
• /
• 2016

Nonlinear behavior of two-span, continuous composite steel-concrete girders strengthened with Carbon Fiber Reinforced Polymers (CFRP) bonded to the top of concrete slab over the negative moment region was evaluated using a non-linear Finite Element (FE) model in this paper. A three-dimensional FE model of continuous composite girder using commercial software ABAQUS simulated and validated with experimental results. The interfacial regions of the composite girder components were modeled using suitable interface elements. Validation of the proposed numerical model with experimental data confirmed the applicability of this model to predict the loading history, strain level for the different components and concrete-steel relative slip. The FE model captured the different modes of failure for the continuous composite girder either in the concrete slab or at the interfacial region between CFRP sheet and concrete slab. Through a parametric study, the thickness of CFRP sheet and shear connection required to develop full capacity of the continuous composite girder at negative moment zone have been investigated. The FE results showed that the proper thickness of CFRP sheet at negative moment region is a function of the adhesive strength and the positive moment capacity of the composite section. The shear connection required at the negative moment zone depends on CFRP sheet's tensile stress level at ultimate load.

• 한국재료학회지
• /
• 제6권2호
• /
• pp.210-220
• /
• 1996

The purpose of this study is to develop the processing techniques of Fiber Reinforced Metal by Liquid Phase Diffusion Bonding method with SiC fiber as a reinforcing material and CP Ti(Commercial Pure) as a matrix. The microstructure and the distribution of elements in reaction and CP Ti(Commercial Pure) as a matrix. The microstructure and the distribution of elements is reaction zone among CP Ti/Ti-15wt%Cu-20wt%Ni(TCN20)/SiC long fiber were investigated by Optical Microscope, SEM/EDX, EPMA, X-ray and AES. The results obtained in this study are as follows. 1) When Ti matrix composite materials are fabricated under the bonding condition of 1273Kx1200sec, the SiC long fiber was the most suitable reinforcing material for Ti matrix composite materials. 2) With SiC long fiber under same condition, a TiC layer(1.0-1.6$\mu\textrm{m}$) was observed on the surface of SiC long fiber. 3) Liquid Phase Diffusion Bonding has shown the feasibility of production of Ti matrix composite materials.

• 한국주거학회논문집
• /
• 제23권2호
• /
• pp.25-36
• /
• 2012

The purpose of this study is to find out the commercialization characteristics of 2nd class residential district in innercity railway station area as basic research to protect urban residential area against the pressure of commercialization. Through the research that are based on literature, field survey and urban planning map, it analysed the commercialization characteristic of selected three sites under similar urban condition; to be a nearby subway station and to be a famous commercial street in site, etc. The consequences of this study are summarized as follows; First it finds the commercialized lots in all blocks that adjoin blocks of upper class zoning. Second it is in inverse proportion between the commercialization of lots and the distance from subway station to residential block. Third, the corner lot of a block and the access road directly connected collector road are very important factors to spread commercialization to residential area. Finally, it finds the difference of the commercialization degree of 2nd class residential zone according to arrange main commercial street and the 2nd class residential block; vertical arrangement and horizontal arrangement.

• 한국해양공학회지
• /
• 제28권1호
• /
• pp.34-46
• /
• 2014

This paper discusses a new formulation for the failure strain in the average stress triaxiaility domain for a low-temperature high-strength steel (EH36). The new formula available at a low average stress triaxiality zone is proposed based on the comparison of two results from tensile tests of flat type specimens and their numerical simulations. In order to confirm the validity of the failure strain formulation, a user-subroutine was developed using Abaqus/Explicit, which is known to be one of the most popular commercial finite element analysis codes. Numerical fracture simulations with the user-subroutine were conducted for all the tensile tests. A comparison of the engineering stress-strain curves and engineering failure strain obtained from the numerical simulation with the user-subroutine for the tensile tests revealed that the newly developed user-subroutine effectively predicts the initiation of failure.

• Ocean and Polar Research
• /
• 제36권4호
• /
• pp.367-371
• /
• 2014

In early 1990s, the Korean government has launched a deep-sea research program to secure the stable long-term supply of strategic metallic minerals including Cr, Cu and Ni. Through the pioneering surveys, Korea registered $150,000km^2$ of Mn-nodule field in the Clarion-Clipperton area, the NE equatorial Pacific to the international sea-bed authority (ISA) in 1994. Following the ISA exploration code, the final exclusive exploration area of $75,000km^2$ was assigned in 2002, based on results of eight-year researches of chemico-physical properties of nodules, bottom profiles and sediment properties. Since that time, environmental studies, mining technical developments including robot miner and lifting system and establishment of smelting systems were accompanied with the detailed geophysical studies to decipher the priori mining area until 2009. Major points of the recent Korea Mn-nodule program are deployed on a commercial scale until 2015. In order to meet the goals, we developed a 1/5 scaled robot miner compared to commercial one in 2012 and performed a mining test at the water depth of 1,370 m in 2013. In addition, detailed 25,000 scaled mining maps in the priori area, which can provide operation roots of the miner, will be prepared and an environmental-friendly mining strategy will be pursued based on the environmental impact test and environmental monitoring.

• KSBB Journal
• /
• 제32권3호
• /
• pp.179-186
• /
• 2017

This study was undertaken to identify and characterize hemolytic Bacillus cereus isolated from commercial ssam-jang. The physiological and biochemical properties of isolate were first examined. Using the BIOLOG system, the isolate was identified and assigned to B. cereus MH-2. Phylogenetic tree of MH-2 was plotted based on 16S rRNA sequence comparisons. Hemolytic activity was observed around wells of sheep blood agar plates seeded with MH-2 cultures; the zone of hemolysis gradually increased with increasing incubation time of the cultures. Zymographic analysis estimated the molecular weight of the presumed hemolysis-causing molecule to be about 30 kDa. Survival rates of MH-2 cells decreased with increasing NaCl concentrations in the media. The stress shock proteins (e.g., DnaK and GroEL) induced by NaCl were reduced in proportion to the NaCl concentration and exposure period to B. cereus MH-2. Analysis of SDS-PAGE and Western blot revealed that the stress shock proteins, 70-kDa DnaK and 60-kDa GroEL were decreased proportionate to the NaCl concentrations as well as exposure period in exponentially growing cultures. Scanning electron microscopy demonstrated the presence of perforations and irregular rod forms with wrinkled surfaces in cells treated with NaCl.

• 대한기계학회논문집B
• /
• 제35권9호
• /
• pp.915-922
• /
• 2011

본 연구에서는 연속 뜸의 열자극 특성을 분석하기 위하여 복합대류 열전달 간이 모형을 만들어 ANSYS-FLUENT 를 이용하여 수치해석을 수행하였다. 연속 뜸의 주기가 열자극 효과에 미치는 영향을 파악하기 위해서 여러 장의 뜸을 다양한 주기로 적용하였다. 수치해석을 통하여 뜸의 장수가 증가할수록 유효자극영역의 깊이가 증가하기 위해서는 교체온도가 체온과 같거나 체온보다 커야 함을 확인하였고, 뜸의 적용 수가 증가함에 따른 유효자극 영역 깊이의 증가율은 감소함을 보였다. 또한, 유효자극의 지속시간이 최대가 되는 연속 뜸의 최적의 교체 주기가 존재함을 확인하였다.

• 한국도로학회논문집
• /
• 제19권6호
• /
• pp.13-21
• /
• 2017

PURPOSES : In this research, an SB3-level roadside barrier for a highway transition zone that meets the newly established guide Installation and Management Guide for Roadside Safety Appurtenance is developed. Its performance is evaluated by a numerical simulation and real-scale vehicle impact test. METHODS : The commercial explicit dynamic software LS-DYNA is utilized for impact simulation. An FE model of a passenger vehicle developed and released by the National Crash Analysis Center (NCAC) at George Washington University and a heavy goods vehicle (HGV) model developed by the TC226/CM-E Work Group are utilized for impact simulation. The original vehicle models were modified to reflect the conditions of test vehicles. The impact positions of the passenger vehicle and truck to the transition guardrail were set as 1/2 and 3/4 of the transition region, respectively, according to the guide. RESULTS : Based on the numerical simulation results of the existing transition barrier, a new structural system with improved performance was suggested. According to the result of a numerical simulation of the suggested structural system, two sets of transition barriers were manufactured and installed for real-scale vehicle impact tests. The tests were performed at a test field for roadside safety hardware of the Korea Highway Corporation Research Institute. CONCLUSIONS : The results of both the real-vehicle impact tests and numerical simulations of the developed transition barrier satisfied the performance criteria, and the results of numerical simulation showed good correlation with the test results.

• 한국조경학회지
• /
• 제30권3호
• /
• pp.1-11
• /
• 2002

The purpose of this study is to construct an evaluation criteria based on the relative importance and various combinations of each evaluation index and then to appraise urban biotope in terms of nature experience and recreation. After the standard of evaluation had been developed through the review of existing literature, the relative importance of the evaluation index through expert survey was determined, and the evaluation model to assess biotope value was established. The results of this study are as follows; 1) We have constructed the seventeen evaluation criteria through literature reviews, and have provided relative importance to each evaluation index of the natural in biotope, the diversity of landscape patterns, the appearance-existence of water space, the special landscape elements, and the access based on the results of expert survey. and then we have constructed an evaluation system using the relative importance criteria. 2) To evaluate urban biotope using the evaluation system constructed, we selected 14 sites. The final evaluation results of each site is as follows; The first grade areas are the water space with semi-natural style in front of Gangchon Woobang apartments, the forest zone near Page Temple at Mt. Palgong, the edge area of Jisan and Gosan and the tendril yard against Anshim middle school. The second grade areas are Hyomyung elementary school, the farm land behind the third Anshim Jugong apartment, Ehyun put and the swampy land in front of the Kangchon and Anshim construction site. The third grade areas are Seohan and Hwasung high-rise apartments at Beummul-Dong, the Korea Manpower Agency in the Sungseo industrial zone, and the adjacent area of St. Tongil. The only fourth grade area is the commercial zone near Taegu Department Store. 3) It is highly useful to evaluate urban biotope using the evaluation criteria constructed for this research, the evaluation criteria we developed may be difficult to encompass all expert opinion and the period of space-formation is difficult to estimate urban biotopes. In the future, it is necessary to gather the basic data suitable to estimate biotope and it is necessary to develop detailed evaluation criteria applicable to estimate every biotope that has specific property.

• 한국조경학회지
• /
• 제29권1호
• /
• pp.100-112
• /
• 2001

The purpose of this study is to construct the evaluation criteria based on the relative importance and various combination of each evaluation index and then to evaluate urban biotope in terms of conservation of species and habitat. After the standard of evaluation had been developed through the literature review, the relative importance of the evaluation index through expert survey was found out, and the evaluation model of biotope value has been established. The results of this study are as follows; 1) We have constructed the nineteen evaluation criteria through literature reviews, and have provided relative importance to each evaluation index of the diversity of typical species in biotope, afforestation rate, stratification, Hemeroby grads, and the diversity of landscape patterns based on the results of expert survey. and then we have constructed the evaluation system using the relative importance criteria. 2) To evluate urban biotope using the evaluation system constructed, we selected 14 sites. The final evaluation results of each site is as follows; The III grade areas are Seohan and Hwasung high-rise apartment at Beummul-Dong, Korea Men Power /Agency in Sungs 대 industrial zone, the adjacent area of St. Tongil, and Hyomyung elementary school. The II grade areas are the farm land behind the third Anshim Jugong apartment, and Ehyun park. The I grade areas are swampy land in front of Kangchon and Anshim construction site, water space with semi-natural style in front of Gangchon Woobang apartment, forest zone near page Temple at mt. Palgong, the edge area of Jisan and Gosan, and the tendril yard against Anshim middle school. The only grade IV area is the commercial zone near Taegu Department 3) It is highly useful to evaluate urban biotope using the evaluation criteria constructed for this research, the evaluation criteria we developed may be difficult to guarantee the ability for reproduction and recovery, the appearance-number of the rare and endangered species are difficult to estimate urban biotopes. In the future, it is highly useful to evaluate biotope in terms of conservation of species and habitat through its valuation criteria developed in this research and it is necessary to develop the evaluation criteria applicable to estimation of biotope inventory and reproduction of biotope.