• Journal of Korea Foundry Society
• /
• v.18 no.6
• /
• pp.593-603
• /
• 1998

Commercial ductile iron was coated with titanium and aluminum powders by low pressure plasma spraying and then irradiated with a $CO_2$ laser to produce anti-corrosive TiC composite layer. TiC carbides were precipitated homogeneously in a laser alloyed layer by in-situ reaction between carbon existed in the base metal and titanium with thermal sprayed coating. The formation of gas pores and brittle limited mixing zone with ledeburite microstructure in TiC composite layer were surpressed by the complementary alloying of aluminum. The hardness of TiC composite layer obtained by addition of titanium and aluminum was between 600 and 660 Hv, which was three times as high as the hardness of ferritic ductile iron. From the results of isothermal oxidation at 1123k for 24 hours in air, high temperature oxidation resistance of the TiC composite layer with aluminum was improved and doubled when compared with the TiC composite layer without aluminum.

• Journal of Arbitration Studies
• /
• v.26 no.4
• /
• pp.63-82
• /
• 2016

In order to cope with the changes of International Commercial Arbitration, the Shanghai International Economic and Trade Arbitration Commission (SHIAC) regulated an Emergency Arbitrator for the first time, implementing the arbitration rules in China (Shanghai) Pilot Free Trade Zone on May 1, 2014. Moreover, the China International Economic and Trade Arbitration Commission (CIETAC) also regulated the Emergency Arbitrator in the revised arbitration rules on January 1, 2015. However, it caused considerable contradiction that SHIAC and CIETAC admitted an interim measure decision by the Emergency Arbitrator under the circumstance that the Chinese court can impose a preservative measure in the Civil Procedure Code (CPC) and Arbiration Act. This study attempted to compare the main contents of an Emergency Arbitrator regulated in the arbitration rules of SHIAC and CIETAC with arbitration rules of representative arbitral institutions which operate an Emergency Arbitrator. In addition, this study verified the application features and problems through comparing the rule of SHIAC and CIETAC with the rule related to the preservative measure in Chinese law.

• Fibers and Polymers
• /
• v.7 no.1
• /
• pp.1-7
• /
• 2006

Interaction of a representative antibiotic, doxycycline(Doxy), with commercial poly(acrylonitrile) (PAN) and cationic-dyeable poly(ethylene terephthalate)(PET) fiber was studied in development of infection resistant biomedical materials. Regular PET was also employed for a comparison purpose. Their interactions were investigated at different treatment temperatures, times, and pHs. Fibers were also hydrolyzed by 1% NaOH for 1 or 2 hours at $85^{\circ}C\;and\;100{\circ}C$ to study effect of hydrolysis on antibiotic sorption. Infection-resistant characteristics of the substrates were evaluated by zone of inhibition (ZOI) test. Results revealed that a significant chemical change occurred in PAN and cationic-dyeable PET due to hydrolysis. Additional functional groups obtained by hydrolysis not only enhanced sorption of the antibiotics but also provided greater ZOI values, indicating substantial improvement in sustained infection resistance properties.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.6
• /
• pp.1230-1238
• /
• 1999

To identify antimicrobial activities of soybean paste, studies have been carried out with laboratory manufactured soybean paste, traditional and improved type soybean paste purchased on the market. The soybean paste fermented with Aspergillus oryzae and Rhizopus tamari and commercial soybean paste were shown antimicrobial activities for Bacillus cereus, Escherichia coli, Listeria monocytogenes, Staphy lococcus aureus, Streptococcus faecalis, Escherichia coli O157:H7, Bacillus subtilis and Salmonella typhimurium. Non fermented soybean paste did not show antimicrobial activities against Bacillus cereus, Escherichia coli, Listeria monocytogenes, Staphylococcus aureus and Streptococcus faecalis. The extract of soybean paste extracted by 80% methanol showed the highest antimicrobial activities of in ethyl acetate fraction and followed butanol fraction, respectively. Antimicrobial activities of traditional and improved type soybean paste were shown against all tested microorganisms and clear zone length of traditional soybean paste was slightly larger than that of improved type. Components of antimicrobial fractions of soybean paste were guessed peptides, 4 hydroxy benzoic acid, benzoic acid by GC MS.

• 연구논문집
• /
• s.29
• /
• pp.173-183
• /
• 1999

The vacuum investment casting process for a large gas turbine component, Inner Preswirl Support (IPS), was simulated by using commercial FEM package ProCAST(TM) with view factor radiation method. The solid fraction in mushy zone was directly measured by Differential thermal analysis(DTA-DSC mode). Three types gating design. considering liquid flow and heat release through it. were proposed. Solidification had begun at the ribs or thin sections of the IPS casting and advanced further through the upper and lower gates. The computed temperature gradient G and G/R values at 70% solidified temperature were used for prediction of microshrinkage formation during casting. The effect of mold preheat on the thermal history of the casting displayed minute effect on the microshrinkage formation.

• Nuclear Engineering and Technology
• /
• v.47 no.4
• /
• pp.424-433
• /
• 2015

The operating characteristics of hydrogen iodide (HI) decomposition for hydrogen production were investigated using the commercial computational fluid dynamics code, and various factors, such as hydrogen production, heat of reaction, and temperature distribution, were studied to compare device performance with that expected for device development. Hydrogen production increased with an increase of the surface-to-volume (STV) ratio. With an increase of hydrogen production, the reaction heat increased. The internal pressure and velocity of the HI decomposer were estimated through pressure drop and reducing velocity from the preheating zone. The mass of $H_2O$ was independent of the STV ratio, whereas that of HI decreased with increasing STV ratio.

• Advances in materials Research
• /
• v.5 no.3
• /
• pp.171-179
• /
• 2016

Fusion and characterization of bisphenol-A diglycidyl ether based thermosetting polymer mortars containing an epoxy resin, Fly ash and Rock sand are presented here for the Experimental study. The specimens have been prepared by means of an innovative process, in mild conditions, of commercial epoxy resin, Fly ash and Rock sand based paste. In this way, thermosetting based hybrid mortars characterized by a different content of normalized Fly ash and Rock sand by a homogeneous dispersion of the resin have been obtained. Once hardened, these new composite materials show improved compressive strength and toughness in respect to both the Fly ash and the Rock sand pastes since the Resin provides a more cohesive microstructure, with a reduced amount of micro cracks. The micro structural characterization allows pointing out the presence of an Interfacial Transition Zone similar to that observed in cement based mortars. A correlation between micro-structural features and mechanical properties of the mortar has also been studied.

• International Commerce and Information Review
• /
• v.10 no.4
• /
• pp.221-250
• /
• 2008

This study investigated and analyzed the export competitiveness of Gyeonggi-Do and the effect of Korea-US FTA on its export competitiveness. By reviewing the current status of trade structure and implementing trade specialization index(TSI) of export commodities of Gyeonggi-Do, the investigation has listed the specific export commodities with competitiveness for increasing the volume of its export in the United States, in the short, mid and long run perspectives. From the findings in this study, it suggests specific trade and commercial policies to Korea-US FTA including implementing commodity-oriented export supporting system, strategic marketing method, economic-free-zone plan, R&D investment, export financing and regional economic cooperation.

• Journal of Powder Materials
• /
• v.1 no.1
• /
• pp.60-65
• /
• 1994

When a commercial prealloyed Fe-powder(Fe-5Cr-lMo-2Cu-0.5P-3C) is liquid phase sintered at 116$0^{\circ}C$, liquid precipitates with various shapes form within solid grains during the initial stage of sintering. The shape of a liquid precipitate changes pith the increment of their size from sphere(with radius<0.3$\mu\textrm{m}$), a transient polyhedron with more than 7 faces(1~2 $\mu\textrm{m}$), cuboid(3~5 $\mu\textrm{m}$), and finally to sphere(>5 $\mu\textrm{m}$). The shapes of liquid precipitates closely resemble the growth shapes predicted on the basis of solid-liquid interfacial energy and the coherency strain energy with anisotropic elastic constants in the diffusion zone around the precipitates.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.39 no.spc1
• /
• pp.242-251
• /
• 2006

We describe and illustrate five species of shrimp of the genus Solenocera, collected from the Korean exclusive economic zone (EEZ) between 2001 and 2003 and a commercial seafood market in Busan, South Korea, in 2005. Four of these species, S. alticarinata Kubo 1949, S. comata Stebbing 1915, S. koelbeli De Man 1911, and S. pectinulata Kubo 1949, are new records for the Koreas. The fifth, S. melantho De Man 1907, is a ubiquitous and commercially important species in the region. This report extends the known range of S. pectinulata to Jeju Island in the East China Sea. A key to these species is presented.