• 환경위생공학
• /
• 제15권4호
• /
• pp.98-104
• /
• 2000

Commercial rubber(IR, NR, BR), SBR, and tire were degraded by thermal degradation process. The oil yield of rubbers and tire ranges about 37~86%, it was increased with increase of operation temperature in pyrolysis. And the yield of pyrolytic oil was increased with increase of heating rate. The maximum oil yields of IR, NR, BR, SBR, and tire were 80, 73, 83, 86 and 55% each at $700^{\circ}C$ with a heating rate of $20^{\circ}C$/min, respectively. The pyrolytic oil components were consisted of about 50 aromatic compounds. The calorific value of purolytic oil of commercial rubber, SBR, and tire was measured by calorimeter, it was 39~40 kJ/g. The BET surface area of pyroblack was $47~63m^2/g$. The optimum condition of pyrolysis was operating temperature of $700^{\circ}C$ with heating rate of $20^{\circ}C$. Therefore, the pyrolytic oil and pyroblack are possible to alternative fuel and carbon black.

• 환경위생공학
• /
• 제15권4호
• /
• pp.123-133
• /
• 2000

The kinetic analysis was carried out for commercial rubbers such as NR, IR, BR, SBR 1500, and SBR 1700. Kinetic analysis for the commercial rubbers was performed using the thermogravimetric method, with which the activation energies of NR obtained by Kissinger, Friedman, and Ozawa's method were 195.0, 198.3 and 186.3kJ/mol, whereas that of SBR 1500 were 246.4, 247.5 and 254.8kJ/mol, respectively. It was shown that the yield of pyrolytic oil was generally increased with final temperature increasing, yet slightly decreased or increased over $700^{\circ}C$. Considering the effect of heating rate, it was found that the yield of pyrolytic oil was not consistent for each sample. The number average molecular weight of SBR 1500 was in the range of 740~2486. The calorific value of SBR 1500 was 39~40kJ/g, which were made comparative study of the conventional fuel such as kerosene, diesel, light fuel, and heavy fuel. Therefore it was essential that the selection of the suitable kinetic model and the mathematical solution because of the difference in parameters obtained from each method. It was proposed that the range of $600~700^{\circ}C$ in final temperature and high heating rate due to short run time. It was suggested that the pyrolytic oil be available to use to the fuel.

• Korea-Australia Rheology Journal
• /
• 제19권2호
• /
• pp.75-80
• /
• 2007

The slotted plate technique has previously been shown to be a successful method for directly measuring the static yield stress of suspensions. In this study, we further establish the usefulness of the slotted plate device as a rheometer especially at low shear rates, taking advantage of the extremely low speeds of the slotted plate technique. Newtonian fluids, a shear thinning fluid, and yield stress fluids were tested using the slotted plate device and the results were compared with those from a commercial rheometer using different standard flow geometries. The relationship between the stress on the plate and the viscosity for the slotted plate device obtained by dimensional analysis (drag) predicts a linear relationship between the force at the plate and the plate speed, consistent with the experimental data. The slotted plate device can measure viscosities at very low shear rates. The apparent viscosity - shear-rate data obtained from the slotted plate device are complementary to those obtained using a commercial rheometer. That is : the slotted plate can measure viscosity in the shear rate range $10^{-7}<\dot{\gamma}<10^{-3}\;s^{-1}$, while the commercial rheometer measures viscosity at shear rates higher than $10^{-3}\;s^{-1}$.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권11호
• /
• pp.223-234
• /
• 2021

This study aims to examine whether operating cash flows influence banks' financial stability in Pakistan. The study employed annual panel data collected from annual reports of 20 commercial banks listed on the Pakistan Stock Exchange for the year 2011 to 2019. Free cash flow yield was taken as the dependent variable while cash flow ratio was selected as the independent variable, and net interest margin, income diversification, asset quality, financial leverage, the cost to income ratio, advance net of provisions to total assets ratio, capital ratio, financial performance, breakup value per share and bank size were taken as control variables. The study performed ordinary least square technique, random and fixed effects models, Hausman test, Lagrange multiplier test, descriptive and correlation analysis. Results showed that operating cash flows and net interest margin significantly and positively influenced banks' financial stability while the cost to income ratio and advances net of provisions to total assets ratio significantly and negatively associated with banks' financial stability. To improve financial stability, banks should become more cost-effective and enhance their liquidity levels by lowering lending activities. In the future, it would be useful to compare commercial and investment banks, also Islamic and conventional banks in the same research setting.

• Mycobiology
• /
• 제38권3호
• /
• pp.184-188
• /
• 2010

Calocybe indica, known as milky white mushroom, grows and cultivated in the sub-tropical and temperate zones of South Asia. We investigated the most suitable supplements and their levels for the commercial cultivation of milky white mushroom. Rice bran, maize powder, and wheat bran with their different levels (10, 20, 30, 40, and 50%) were used as supplements to evaluate the yield and yield contributing characteristics of C. indica. Primordia initiation was observed between 13.5 and 19.3 days. The results indicated that the 30% maize powder supplement was effective for producing viable fruiting bodies. The maximum diameters of the pileus and stalk were observed with 30% maize powder. The highest biological and economic yield and biological efficiency were also obtained with 30% maize powder as a supplement. The results indicate that increasing the supplement level resulted in less biological efficiency, and that 30% maize powder was the best supplement level for rice straw substrate to cultivate milky white mushrooms.

• 한국연초학회지
• /
• 제16권2호
• /
• pp.134-138
• /
• 1994

Potato Virus Y(PVY), vein necrosis strain, in Korea causes severe symptoms on burley tobacco(Nicotiana tabacum L.). As the results, programs to incorporate PVY resistance into commercial cultivars were initiatEd. But the development of the homozygous fertile line resistant to PVY is time consumming. This study was conducted whether the Fl hybrid could be used to reduce the yield losses caused by PVY. Four F1 hybrids were made between male - sterile(ms) NC 107 and KB 107 as maternal parent, and TC 612 and TC 613 as Pollen donor, respectively, and were evaluated for their PVY resistance and negatively associated traits. (ms NC 107 X TC 612) F1, named as KB 109, Ivas applied to yield trial and compared with commercial cultivars for the level of disease resistance, agronomic characteristics, chemical contents and physical properties. All Fl hybrid could be used commercially as the PVY resistant cultivar. Especially KB 109 have the resistance against PVY, tobacco mosaic virus and black shank(Phytophthora parasitica var. nicotianae). It had wider leaves, flowered one day later, and yield of acceptable quality was higher than that of Burley 21, standard cultivar in Korea.

• 한국축산식품학회지
• /
• 제43권1호
• /
• pp.61-72
• /
• 2023

The practical use of Korean native black goat skin as a source of gelatin extraction is limited. The objective of this study was to optimize the extraction temperature and time of gelatin from Korean native black goat skin, and to compare the quality characteristics of goat skin gelatin and other commercial gelatin products. Response surface methodology was applied to optimize the extraction temperature and time of gelatin obtained from native Korean black goat skin. The effects of temperature (50℃-70℃) and time (2-4 h) on extraction yield and gel strength were investigated using a face-centered central composite design with 13 experiments. Gelatin extraction from Korean native black goat skin was prepared through the serial processes of alkali pre-treatment, bleaching, neutralization, hot-water extraction, and freeze-drying. Using the optimization plot of Minitab software, the optimized conditions for extracting temperature and time of goat skin gelatin were 59.49℃ and 3.03 h, and the optimized values of extraction yield and gel strength were 12.52% and 263.37 g, respectively. Based on a quality comparison of goat skin gelatin with commercial gelatin, the pH value of gelatin extracted from Korean native black goat skin was 5.57. The color of gelatin extracted from Korean native black goat skin was darker than that of commercial gelatin (p<0.05). Higher emulsifying properties and gel strength of goat skin gelatin were observed when compared to those of commercial gelatin (p<0.05). Therefore, the results of this study indicate that Korean native black goat skin may be a valuable source for gelatin extraction.

• Korean Chemical Engineering Research
• /
• 제56권4호
• /
• pp.547-554
• /
• 2018

Torrefaction is the promising process of pretreating biomass materials to increase the quality of their energy, especially to upgrade the materials' grindability so that it is suitable for a commercial pulverizer machine. In this study, torrefaction of oak, bamboo, oil palm trunk, and rice husk was carried out under different torrefaction temperatures ($300^{\circ}C$, $330^{\circ}C$, and $350^{\circ}C$) and different torrefaction residence times (30, 45, and 60 minutes). Complete characterization of the torrefied biomass, including proximate analysis, calorific value, thermogravimetric analysis, mass yield, energy yield, and grindability properties (Hardgrove Grindability Index) was carried out. Increasing the torrefaction temperature and residence time significantly improved the calorific value, energy density (by reducing the product mass), and grindability of the product. Furthermore, for commercial purposes, the torrefaction conditions that produced the desired grindability properties of the torrefied product were $330^{\circ}C-30minutes$ and $300^{\circ}-45minutes$, and the latter condition produced a higher energy yield for bamboo, oil palm trunk, and rice husk; however, torrefaction of oak did not achieve the targeted grindability property values.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제30권2호
• /
• pp.31-39
• /
• 2015

Antheraea mylitta Drury (Lepidoptera: Saturniidae) is a commercial silk producing forest insect of India, but it has never been experimented in Uttarakhand state in spite of the huge availability of its forestry host plants. This is the first study on A. mylitta in Uttarakhand. The goal of this study is to introduce forest based commercial rearing of A. mylitta, in tropical forest areas of Uttarakhand to reduce poverty among forest dependent people. In current study, we assessed the effect of seven forest tree species, rearing seasons, and their interactions on cocoon productivity of Daba (bivoltine) ecorace of A. mylitta in the New Forest of FRI, Dehra Dun during 2012 and 2013 and collected the data that was analysed by two-way completely randomized block factorial design. Post HOC Tukey's HSD test was carried out to compare the homogeneous pairs of means. We also carried out Evaluation Index analysis to rank the tested forestry host plants for better growth and development of A. mylitta under the climatic condition of Uttarakhand. Analysis of variance indicated that cocoon yield of A. mylitta differed significantly between rearing seasons (DF=1, F=88.24, p<0.05) and host plants (DF 6, F= 368.63, p<0.05); however, their interactions were found insignificant (DF=6, F=0.99, p>0.05). In first rearing season of July-August, there was higher cocoon yield than the second season of September-November. Results indicated that Terminalia alata fed larvae showed significantly higher cocoon yield (164.11 cocoons/300 larvae); followed by, T. tomentosa (148.89 cocoons), T. arjuna (140.00 cocoons) and Lagerstroemia speciosa (129.47 cocoons) fed larvae. Whereas, Lagerstroemia tomentosa fed larvae that was used by the first time in India, showed lowest cocoon yield (48.81 cocoons), followed by T. chebula (72.53 cocoons) fed larvae. Cocoon yield of T. tomentosa and T. arjuna fed larvae of A. mylitta did not differ significantly with each other.

• 소성∙가공
• /
• 제11권1호
• /
• pp.69-74
• /
• 2002

In addition to lightweight and moldable characteristics, polymeric foams possess an excellent energy absorbing capability that can be utilize for a wide range of commercial applications, especially in the crashworthiness of the automobiles. The purpose of the present study is to develop experimental methodology to characterize the pressure dependent yield behavior of the energy absorbing polymeric foams. For the compression test in a triaxial stress sate, a specially designed device was placed in a hydraulic press to produce and control oil pressure. For the test material, the polyurethane foams of two different densities were used. The displacement of the specimen, the load subjected to the specimen, and oil pressure applied to the specimen were measured and controlled. Stress strain curves and yield stresses for the four different oil pressure were obtained. It was found from the present experiments that the polyurethane foams exhibited significant increases in yield stress with applied pressure or mean normal stress. Based on this observation, a yield criteria which included the effect of the stress invariant were established for the polymeric foams. The obtained experimental constants which constituted the pressure-dependent yield criterion were verified.